/* DO NOT EDIT. This file is generated from usage.src.h */ /* vi: set sw=8 ts=8: */ /* * This file suffers from chronically incorrect tabification * of messages. Before editing this file: * 1. Switch you editor to 8-space tab mode. * 2. Do not use \t in messages, use real tab character. * 3. Start each source line with message as follows: * |<7 spaces>"text with tabs".... * or * |<5 spaces>"\ntext with tabs".... */ #ifndef BB_USAGE_H #define BB_USAGE_H 1 #define NOUSAGE_STR "\b" #define scripted_trivial_usage NOUSAGE_STR #define scripted_full_usage "" #if !ENABLE_USE_BB_CRYPT || ENABLE_USE_BB_CRYPT_SHA # define CRYPT_METHODS_HELP_STR "des,md5,sha256/512" \ " (default "CONFIG_FEATURE_DEFAULT_PASSWD_ALGO")" #else # define CRYPT_METHODS_HELP_STR "des,md5" \ " (default "CONFIG_FEATURE_DEFAULT_PASSWD_ALGO")" #endif #if ENABLE_FEATURE_HWCLOCK_ADJTIME_FHS # define ADJTIME_PATH "/var/lib/hwclock/adjtime" #else # define ADJTIME_PATH "/etc/adjtime" #endif #define STR1(s) #s #define STR(s) STR1(s) #define ar_trivial_usage \ "x|p|t"IF_FEATURE_AR_CREATE("|r")" [-ov] ARCHIVE [FILE]..." \ #define ar_full_usage "\n\n" \ "Extract or list FILEs from an ar archive"IF_FEATURE_AR_CREATE(", or create it")"\n" \ "\n x Extract" \ "\n p Extract to stdout" \ "\n t List" \ IF_FEATURE_AR_CREATE( \ "\n r Create" \ ) \ "\n -o Restore mtime" \ "\n -v Verbose" \ #define uncompress_trivial_usage \ "[-cf] [FILE]..." \ #define uncompress_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Overwrite" \ #define gunzip_trivial_usage \ "[-cfkt] [FILE]..." \ #define gunzip_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" \ #define zcat_trivial_usage \ "[FILE]..." \ #define zcat_full_usage "\n\n" \ "Decompress to stdout" \ #define bunzip2_trivial_usage \ "[-cfk] [FILE]..." \ #define bunzip2_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define bzcat_trivial_usage \ "[FILE]..." \ #define bzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define unlzma_trivial_usage \ "[-cfk] [FILE]..." \ #define unlzma_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define lzma_trivial_usage \ "-d [-cfk] [FILE]..." \ #define lzma_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define lzcat_trivial_usage \ "[FILE]..." \ #define lzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define unxz_trivial_usage \ "[-cfk] [FILE]..." \ #define unxz_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define xz_trivial_usage \ "-d [-cfk] [FILE]..." \ #define xz_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ "\n -t Test integrity" \ #define xzcat_trivial_usage \ "[FILE]..." \ #define xzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define bzip2_trivial_usage \ "[-cfk" IF_FEATURE_BZIP2_DECOMPRESS("dt") "123456789] [FILE]..." \ #define bzip2_full_usage "\n\n" \ "Compress FILEs (or stdin) with bzip2 algorithm\n" \ "\n -1..9 Compression level" \ IF_FEATURE_BZIP2_DECOMPRESS( \ "\n -d Decompress" \ ) \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ IF_FEATURE_BZIP2_DECOMPRESS( \ "\n -t Test integrity" \ ) \ #define cpio_trivial_usage \ "[-dmvu] [-F FILE] [-R USER[:GRP]]" IF_FEATURE_CPIO_O(" [-H newc]") \ " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]") \ " [EXTR_FILE]..." \ #define cpio_full_usage "\n\n" \ "Extract (-i) or list (-t) files from a cpio archive" \ IF_FEATURE_CPIO_O(", or" \ "\ntake file list from stdin and create an archive (-o)" \ IF_FEATURE_CPIO_P(" or copy files (-p)") \ ) \ "\n" \ "\nMain operation mode:" \ "\n -t List" \ "\n -i Extract EXTR_FILEs (or all)" \ IF_FEATURE_CPIO_O( \ "\n -o Create (requires -H newc)" \ ) \ IF_FEATURE_CPIO_P( \ "\n -p DIR Copy files to DIR" \ ) \ "\nOptions:" \ IF_FEATURE_CPIO_O( \ "\n -H newc Archive format" \ ) \ "\n -d Make leading directories" \ "\n -m Restore mtime" \ "\n -v Verbose" \ "\n -u Overwrite" \ "\n -F FILE Input (-t,-i,-p) or output (-o) file" \ "\n -R USER[:GRP] Set owner of created files" \ "\n -L Dereference symlinks" \ "\n -0 NUL terminated input" \ IF_FEATURE_CPIO_IGNORE_DEVNO( \ "\n --ignore-devno" \ ) \ IF_FEATURE_CPIO_RENUMBER_INODES( \ "\n --renumber-inodes" \ ) \ #define dpkg_trivial_usage \ "[-ilCPru] [-F OPT] PACKAGE" \ #define dpkg_full_usage "\n\n" \ "Install, remove and manage Debian packages\n" \ IF_LONG_OPTS( \ "\n -i,--install Install the package" \ "\n -l,--list List of installed packages" \ "\n --configure Configure an unpackaged package" \ "\n -P,--purge Purge all files of a package" \ "\n -r,--remove Remove all but the configuration files for a package" \ "\n --unpack Unpack a package, but don't configure it" \ "\n --force-depends Ignore dependency problems" \ "\n --force-confnew Overwrite existing config files when installing" \ "\n --force-confold Keep old config files when installing" \ ) \ IF_NOT_LONG_OPTS( \ "\n -i Install the package" \ "\n -l List of installed packages" \ "\n -C Configure an unpackaged package" \ "\n -P Purge all files of a package" \ "\n -r Remove all but the configuration files for a package" \ "\n -u Unpack a package, but don't configure it" \ "\n -F depends Ignore dependency problems" \ "\n -F confnew Overwrite existing config files when installing" \ "\n -F confold Keep old config files when installing" \ ) \ #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [DIR]" \ #define dpkg_deb_full_usage "\n\n" \ "Perform actions on Debian packages (.deb)\n" \ "\n -c List files" \ "\n -f Print control fields" \ "\n -e Extract control files to DIR (default: ./DEBIAN)" \ "\n -x Extract files to DIR (no default)" \ "\n -X Verbose extract" \ #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" \ #define gzip_trivial_usage \ "[-cfk" IF_FEATURE_GZIP_DECOMPRESS("dt") IF_FEATURE_GZIP_LEVELS("123456789") "] [FILE]..." \ #define gzip_full_usage "\n\n" \ "Compress FILEs (or stdin)\n" \ IF_FEATURE_GZIP_LEVELS( \ "\n -1..9 Compression level" \ ) \ IF_FEATURE_GZIP_DECOMPRESS( \ "\n -d Decompress" \ ) \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -k Keep input files" \ IF_FEATURE_GZIP_DECOMPRESS( \ "\n -t Test integrity" \ ) \ #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ "$ gzip /tmp/busybox.tar\n" \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" \ #define lzop_trivial_usage \ "[-cfUvd123456789CF] [FILE]..." \ #define lzop_full_usage "\n\n" \ " -1..9 Compression level" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -U Delete input files" \ "\n -v Verbose" \ "\n -F Don't store or verify checksum" \ "\n -C Also write checksum of compressed block" \ #define lzopcat_trivial_usage \ "[-vF] [FILE]..." \ #define lzopcat_full_usage "\n\n" \ " -v Verbose" \ "\n -F Don't verify checksum" \ #define unlzop_trivial_usage \ "[-cfUvF] [FILE]..." \ #define unlzop_full_usage "\n\n" \ " -c Write to stdout" \ "\n -f Force" \ "\n -U Delete input files" \ "\n -t Test integrity" \ "\n -v Verbose" \ "\n -F Don't verify checksum" \ #define rpm_trivial_usage \ "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm" \ #define rpm_full_usage "\n\n" \ "Manipulate RPM packages\n" \ "\nCommands:" \ "\n -i Install package" \ "\n -qp Query package" \ "\n -qpi Show information" \ "\n -qpl List contents" \ "\n -qpd List documents" \ "\n -qpc List config files" \ #define rpm2cpio_trivial_usage \ "PACKAGE.rpm" \ #define rpm2cpio_full_usage "\n\n" \ "Output a cpio archive of the rpm file" \ #define tar_trivial_usage \ IF_FEATURE_TAR_CREATE("c|") "x|t [-" \ IF_FEATURE_SEAMLESS_Z("Z") \ IF_FEATURE_SEAMLESS_GZ("z") \ IF_FEATURE_SEAMLESS_XZ("J") \ IF_FEATURE_SEAMLESS_BZ2("j") \ "a" \ IF_FEATURE_TAR_CREATE("h") \ IF_FEATURE_TAR_NOPRESERVE_TIME("m") \ "vokO] " \ "[-f TARFILE] [-C DIR] " \ IF_FEATURE_TAR_FROM("[-T FILE] [-X FILE] "IF_FEATURE_TAR_LONG_OPTIONS("[LONGOPT]... ")) \ "[FILE]..." \ #define tar_full_usage "\n\n" \ IF_FEATURE_TAR_CREATE("Create, extract, ") \ IF_NOT_FEATURE_TAR_CREATE("Extract ") \ "or list files from a tar file" \ "\n" \ IF_FEATURE_TAR_CREATE( \ "\n c Create" \ ) \ "\n x Extract" \ "\n t List" \ "\n -f FILE Name of TARFILE ('-' for stdin/out)" \ "\n -C DIR Change to DIR before operation" \ "\n -v Verbose" \ "\n -O Extract to stdout" \ IF_FEATURE_TAR_NOPRESERVE_TIME( \ "\n -m Don't restore mtime" \ ) \ "\n -o Don't restore user:group" \ "\n -k Don't replace existing files" \ IF_FEATURE_SEAMLESS_Z( \ "\n -Z (De)compress using compress" \ ) \ IF_FEATURE_SEAMLESS_GZ( \ "\n -z (De)compress using gzip" \ ) \ IF_FEATURE_SEAMLESS_XZ( \ "\n -J (De)compress using xz" \ ) \ IF_FEATURE_SEAMLESS_BZ2( \ "\n -j (De)compress using bzip2" \ ) \ IF_FEATURE_SEAMLESS_LZMA( \ IF_FEATURE_TAR_LONG_OPTIONS( \ "\n --lzma (De)compress using lzma" \ ) \ ) \ "\n -a (De)compress based on extension" \ IF_FEATURE_TAR_CREATE( \ "\n -h Follow symlinks" \ ) \ IF_FEATURE_TAR_FROM( \ "\n -T FILE File with names to include" \ "\n -X FILE File with glob patterns to exclude" \ IF_FEATURE_TAR_LONG_OPTIONS( \ "\n --exclude PATTERN Glob pattern to exclude" \ ) \ ) \ IF_FEATURE_TAR_LONG_OPTIONS( \ "\n --overwrite Replace existing files" \ "\n --strip-components NUM NUM of leading components to strip" \ "\n --no-recursion Don't descend in directories" \ "\n --numeric-owner Use numeric user:group" \ "\n --no-same-permissions Don't restore access permissions" \ IF_FEATURE_TAR_TO_COMMAND( \ "\n --to-command COMMAND Pipe files to COMMAND" \ ) \ ) \ #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" \ #define unzip_trivial_usage \ "[-lnojpqK] FILE[.zip] [FILE]... [-x FILE]... [-d DIR]" \ #define unzip_full_usage "\n\n" \ "Extract FILEs from ZIP archive\n" \ "\n -l List contents (with -q for short form)" \ "\n -n Never overwrite files (default: ask)" \ "\n -o Overwrite" \ "\n -j Do not restore paths" \ "\n -p Write to stdout" \ "\n -t Test" \ "\n -q Quiet" \ "\n -K Do not clear SUID bit" \ "\n -x FILE Exclude FILEs" \ "\n -d DIR Extract into DIR" \ #define chvt_trivial_usage \ "N" \ #define chvt_full_usage "\n\n" \ "Change the foreground virtual terminal to /dev/ttyN" \ #define clear_trivial_usage \ "" \ #define clear_full_usage "\n\n" \ "Clear screen" \ #define deallocvt_trivial_usage \ "[N]" \ #define deallocvt_full_usage "\n\n" \ "Deallocate unused virtual terminal /dev/ttyN" \ #define dumpkmap_trivial_usage \ "> keymap" \ #define dumpkmap_full_usage "\n\n" \ "Print a binary keyboard translation table to stdout" \ #define dumpkmap_example_usage \ "$ dumpkmap > keymap\n" \ #define fgconsole_trivial_usage \ "" \ #define fgconsole_full_usage "\n\n" \ "Get active console" \ #define kbd_mode_trivial_usage \ "[-a|k|s|u] [-C TTY]" \ #define kbd_mode_full_usage "\n\n" \ "Report or set VT console keyboard mode\n" \ "\n -a Default (ASCII)" \ "\n -k Medium-raw (keycode)" \ "\n -s Raw (scancode)" \ "\n -u Unicode (utf-8)" \ "\n -C TTY Affect TTY" \ #define loadfont_trivial_usage \ "< font" \ #define loadfont_full_usage "\n\n" \ "Load a console font from stdin" \ #define loadfont_example_usage \ "$ loadfont < /etc/i18n/fontname\n" \ #define setfont_trivial_usage \ "[-m MAPFILE] [-C TTY] FILE" \ #define setfont_full_usage "\n\n" \ "Load a console font\n" \ "\n -m MAPFILE Load console screen map" \ "\n -C TTY Affect TTY instead of /dev/tty" \ #define setfont_example_usage \ "$ setfont -m koi8-r /etc/i18n/fontname\n" \ #define loadkmap_trivial_usage \ "< keymap" \ #define loadkmap_full_usage "\n\n" \ "Load a binary keyboard translation table from stdin" \ #define loadkmap_example_usage \ "$ loadkmap < /etc/i18n/lang-keymap\n" \ #define openvt_trivial_usage \ "[-c N] [-sw] [PROG ARGS]" \ #define openvt_full_usage "\n\n" \ "Start PROG on a new virtual terminal\n" \ "\n -c N Use specified VT" \ "\n -s Switch to the VT" \ "\n -w Wait for PROG to exit" \ #define openvt_example_usage \ "openvt 2 /bin/ash\n" \ #define reset_trivial_usage \ "" \ #define reset_full_usage "\n\n" \ "Reset terminal (ESC codes) and termios (signals, buffering, echo)" \ #define resize_trivial_usage \ "" \ #define resize_full_usage "\n\n" \ "Resize the screen" \ #define setconsole_trivial_usage \ "[-r] [DEVICE]" \ #define setconsole_full_usage "\n\n" \ "Make writes to /dev/console appear on DEVICE (default: /dev/tty)." \ "\n""Does not redirect kernel log output or reads from /dev/console." \ "\n" \ "\n"" -r Reset: writes to /dev/console go to kernel log tty(s)" \ #define setkeycodes_trivial_usage \ "{ SCANCODE KEYCODE }..." \ #define setkeycodes_full_usage "\n\n" \ "Modify kernel's scancode-to-keycode map,\n" \ "allowing unusual keyboards to generate usable keycodes.\n\n" \ "SCANCODE is either xx or e0xx (hexadecimal), KEYCODE is decimal." \ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" \ #define setlogcons_trivial_usage \ "[N]" \ #define setlogcons_full_usage "\n\n" \ "Pin kernel output to VT console N. Default:0 (do not pin)" \ #define showkey_trivial_usage \ "[-a | -k | -s]" \ #define showkey_full_usage "\n\n" \ "Show keys pressed\n" \ "\n -a Display decimal/octal/hex values of the keys" \ "\n -k Display interpreted keycodes (default)" \ "\n -s Display raw scan-codes" \ #define basename_trivial_usage \ "FILE [SUFFIX] | -a FILE... | -s SUFFIX FILE..." \ #define basename_full_usage "\n\n" \ "Strip directory path and SUFFIX from FILE\n" \ "\n -a All arguments are FILEs" \ "\n -s SUFFIX Remove SUFFIX (implies -a)" \ #define basename_example_usage \ "$ basename /usr/local/bin/foo\n" \ "foo\n" \ "$ basename /usr/local/bin/\n" \ "bin\n" \ "$ basename /foo/bar.txt .txt\n" \ "bar" \ #if ENABLE_FEATURE_CATN || ENABLE_FEATURE_CATV \ #define cat_trivial_usage \ "[-" IF_FEATURE_CATN("nb") IF_FEATURE_CATV("vteA") "] [FILE]..." \ #else \ #define cat_trivial_usage \ "[FILE]..." \ #endif \ #define cat_full_usage "\n\n" \ "Print FILEs to stdout\n" \ IF_FEATURE_CATN( \ "\n -n Number output lines" \ "\n -b Number nonempty lines" \ ) \ IF_FEATURE_CATV( \ "\n -v Show nonprinting characters as ^x or M-x" \ "\n -t ...and tabs as ^I" \ "\n -e ...and end lines with $" \ "\n -A Same as -vte" \ ) \ #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" \ #define chgrp_trivial_usage \ "[-Rh"IF_DESKTOP("LHPcvf")"]... GROUP FILE..." \ #define chgrp_full_usage "\n\n" \ "Change the group membership of FILEs to GROUP" \ "\n" \ "\n -h Affect symlinks instead of symlink targets" \ IF_DESKTOP( \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Don't traverse symlinks (default)" \ ) \ "\n -R Recurse" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) \ #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chgrp root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" \ #define chmod_trivial_usage \ "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..." \ #define chmod_full_usage "\n\n" \ "MODE is octal number (bit pattern sstrwxrwxrwx) or [ugoa]{+|-|=}[rwxXst]" \ "\n" \ "\n -R Recurse" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) \ #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ "$ chmod u+x /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ "$ chmod 444 /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ #define chown_trivial_usage \ "[-Rh"IF_DESKTOP("LHPcvf")"]... USER[:[GRP]] FILE..." \ #define chown_full_usage "\n\n" \ "Change the owner and/or group of FILEs to USER and/or GRP" \ "\n" \ "\n -h Affect symlinks instead of symlink targets" \ IF_DESKTOP( \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Don't traverse symlinks (default)" \ ) \ "\n -R Recurse" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) \ #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root.root /tmp/foo\n" \ "ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ #define chroot_trivial_usage \ "NEWROOT [PROG ARGS]" \ #define chroot_full_usage "\n\n" \ "Run PROG with root directory set to NEWROOT" \ #define chroot_example_usage \ "$ ls -l /bin/ls\n" \ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ "# mount /dev/hdc1 /mnt -t minix\n" \ "# chroot /mnt\n" \ "# ls -l /bin/ls\n" \ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" \ #define cksum_trivial_usage \ "FILE..." \ #define cksum_full_usage "\n\n" \ "Calculate CRC32 checksum of FILEs" \ #define comm_trivial_usage \ "[-123] FILE1 FILE2" \ #define comm_full_usage "\n\n" \ "Compare FILE1 with FILE2\n" \ "\n -1 Suppress lines unique to FILE1" \ "\n -2 Suppress lines unique to FILE2" \ "\n -3 Suppress lines common to both files" \ #define cp_trivial_usage \ "[-arPLHpfinlsTu] SOURCE DEST\n" \ "or: cp [-arPLHpfinlsu] SOURCE... { -t DIRECTORY | DIRECTORY }" \ #define cp_full_usage "\n\n" \ "Copy SOURCEs to DEST\n" \ "\n -a Same as -dpR" \ IF_SELINUX( \ "\n -c Preserve security context" \ ) \ "\n -R,-r Recurse" \ "\n -d,-P Preserve symlinks (default if -R)" \ "\n -L Follow all symlinks" \ "\n -H Follow symlinks on command line" \ "\n -p Preserve file attributes if possible" \ "\n -f Overwrite" \ "\n -i Prompt before overwrite" \ "\n -n Don't overwrite" \ "\n -l,-s Create (sym)links" \ "\n -T Refuse to copy if DEST is a directory" \ "\n -t DIR Copy all SOURCEs into DIR" \ "\n -u Copy only newer files" \ #define cut_trivial_usage \ "[OPTIONS] [FILE]..." \ #define cut_full_usage "\n\n" \ "Print selected fields from FILEs to stdout\n" \ "\n -b LIST Output only bytes from LIST" \ "\n -c LIST Output only characters from LIST" \ "\n -d SEP Field delimiter for input (default -f TAB, -F run of whitespace)" \ "\n -O SEP Field delimeter for output (default = -d for -f, one space for -F)" \ "\n -D Don't sort/collate sections or match -fF lines without delimeter" \ "\n -f LIST Print only these fields (-d is single char)" \ IF_FEATURE_CUT_REGEX( \ "\n -F LIST Print only these fields (-d is regex)" \ ) \ "\n -s Output only lines containing delimiter" \ "\n -n Ignored" \ #define cut_example_usage \ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ "Hello\n" \ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ "world\n" \ #define date_trivial_usage \ "[OPTIONS] [+FMT] [[-s] TIME]" \ #define date_full_usage "\n\n" \ "Display time (using +FMT), or set time\n" \ "\n -u Work in UTC (don't convert to local time)" \ "\n [-s] TIME Set time to TIME" \ "\n -d TIME Display TIME, not 'now'" \ IF_FEATURE_DATE_ISOFMT( \ "\n -D FMT FMT (strptime format) for -s/-d TIME conversion" \ ) \ "\n -r FILE Display last modification time of FILE" \ "\n -R Output RFC-2822 date" \ IF_FEATURE_DATE_ISOFMT( \ "\n -I[SPEC] Output ISO-8601 date" \ "\n SPEC=date (default), hours, minutes, seconds or ns" \ ) \ "\n" \ "\nRecognized TIME formats:" \ "\n @seconds_since_1970" \ "\n hh:mm[:ss]" \ "\n [YYYY.]MM.DD-hh:mm[:ss]" \ "\n YYYY-MM-DD hh:mm[:ss]" \ "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \ IF_FEATURE_DATE_COMPAT( \ "\n 'date TIME' form accepts MMDDhhmm[[YY]YY][.ss] instead" \ ) \ #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" \ #define dd_trivial_usage \ "[if=FILE] [of=FILE] [" IF_FEATURE_DD_IBS_OBS("ibs=N obs=N/") "bs=N] [count=N] [skip=N] [seek=N]" \ IF_FEATURE_DD_IBS_OBS("\n" \ " [conv=notrunc|noerror|sync|fsync]\n" \ " [iflag=skip_bytes|count_bytes|fullblock|direct] [oflag=seek_bytes|append|direct]" \ ) \ #define dd_full_usage "\n\n" \ "Copy a file with converting and formatting\n" \ "\n if=FILE Read from FILE instead of stdin" \ "\n of=FILE Write to FILE instead of stdout" \ "\n bs=N Read and write N bytes at a time" \ IF_FEATURE_DD_IBS_OBS( \ "\n ibs=N Read N bytes at a time" \ ) \ IF_FEATURE_DD_IBS_OBS( \ "\n obs=N Write N bytes at a time" \ ) \ "\n count=N Copy only N input blocks" \ "\n skip=N Skip N input blocks" \ "\n seek=N Skip N output blocks" \ IF_FEATURE_DD_IBS_OBS( \ "\n conv=notrunc Don't truncate output file" \ "\n conv=noerror Continue after read errors" \ "\n conv=sync Pad blocks with zeros" \ "\n conv=fsync Physically write data out before finishing" \ "\n conv=swab Swap every pair of bytes" \ "\n iflag=skip_bytes skip=N is in bytes" \ "\n iflag=count_bytes count=N is in bytes" \ "\n oflag=seek_bytes seek=N is in bytes" \ "\n iflag=direct O_DIRECT input" \ "\n oflag=direct O_DIRECT output" \ "\n iflag=fullblock Read full blocks" \ "\n oflag=append Open output in append mode" \ ) \ IF_FEATURE_DD_STATUS( \ "\n status=noxfer Suppress rate output" \ "\n status=none Suppress all output" \ ) \ "\n" \ "\nN may be suffixed by c (1), w (2), b (512), kB (1000), k (1024), MB, M, GB, G" \ #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ "4+0 records out\n" \ #define df_trivial_usage \ "[-Pk" \ IF_FEATURE_HUMAN_READABLE("mh") \ "T" \ IF_FEATURE_DF_FANCY("ai] [-B SIZE") \ "] [-t TYPE] [FILESYSTEM]..." \ #define df_full_usage "\n\n" \ "Print filesystem usage statistics\n" \ "\n -P POSIX output format" \ "\n -k 1024-byte blocks (default)" \ IF_FEATURE_HUMAN_READABLE( \ "\n -m 1M-byte blocks" \ "\n -h Human readable (e.g. 1K 243M 2G)" \ ) \ "\n -T Print filesystem type" \ "\n -t TYPE Print only mounts of this type" \ IF_FEATURE_DF_FANCY( \ "\n -a Show all filesystems" \ "\n -i Inodes" \ "\n -B SIZE Blocksize" \ ) \ #define df_example_usage \ "$ df\n" \ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "/dev/sda1 64216 36364 27852 57% /boot\n" \ "$ df /dev/sda3\n" \ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \ "Filesystem 512B-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 17381728 17107080 274648 98% /\n" \ "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \ "Filesystem 512-blocks Used Available Capacity Mounted on\n" \ "/dev/sda3 17381728 17107080 274648 98% /\n" \ #define dirname_trivial_usage \ "FILENAME" \ #define dirname_full_usage "\n\n" \ "Strip non-directory suffix from FILENAME" \ #define dirname_example_usage \ "$ dirname /tmp/foo\n" \ "/tmp\n" \ "$ dirname /tmp/foo/\n" \ "/tmp\n" \ #define dos2unix_trivial_usage \ "[-ud] [FILE]" \ #define dos2unix_full_usage "\n\n" \ "Convert FILE in-place from DOS to Unix format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define unix2dos_trivial_usage \ "[-ud] [FILE]" \ #define unix2dos_full_usage "\n\n" \ "Convert FILE in-place from Unix to DOS format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define du_trivial_usage \ "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." \ #define du_full_usage "\n\n" \ "Summarize disk space used for FILEs (or directories)\n" \ "\n -a Show file sizes too" \ "\n -b Apparent size (including holes)" \ "\n -L Follow all symlinks" \ "\n -H Follow symlinks on command line" \ "\n -d N Limit output to directories (and files with -a) of depth < N" \ "\n -c Show grand total" \ "\n -l Count sizes many times if hard linked" \ "\n -s Display only a total for each argument" \ "\n -x Skip directories on different filesystems" \ IF_FEATURE_HUMAN_READABLE( \ "\n -h Sizes in human readable format (e.g., 1K 243M 2G)" \ "\n -m Sizes in megabytes" \ ) \ "\n -k Sizes in kilobytes" IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \ IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K( \ "\n Default unit is 512 bytes" \ ) \ #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ "12 ./kernel-patches/CVS\n" \ "80 ./kernel-patches\n" \ "12 ./tests/CVS\n" \ "36 ./tests\n" \ "12 ./scripts/CVS\n" \ "16 ./scripts\n" \ "12 ./docs/CVS\n" \ "104 ./docs\n" \ "2417 .\n" \ #define echo_trivial_usage \ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..." \ #define echo_full_usage "\n\n" \ "Print ARGs to stdout" \ IF_FEATURE_FANCY_ECHO( "\n" \ "\n -n No trailing newline" \ "\n -e Interpret backslash escapes (\\t=tab etc)" \ "\n -E Don't interpret backslash escapes (default)" \ ) \ #define echo_example_usage \ "$ echo \"Erik is cool\"\n" \ "Erik is cool\n" \ IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ "Erik\n" \ "is\n" \ "cool\n" \ "$ echo \"Erik\\nis\\ncool\"\n" \ "Erik\\nis\\ncool\n") \ #define env_trivial_usage \ "[-i0] [-u NAME]... [-] [NAME=VALUE]... [PROG ARGS]" \ #define env_full_usage "\n\n" \ "Print current environment or run PROG after setting up environment\n" \ "\n -, -i Start with empty environment" \ "\n -0 NUL terminated output" \ "\n -u NAME Remove variable from environment" \ #define expand_trivial_usage \ "[-i] [-t N] [FILE]..." \ #define expand_full_usage "\n\n" \ "Convert tabs to spaces, writing to stdout\n" \ "\n -i Don't convert tabs after non blanks" \ "\n -t Tabstops every N chars" \ #define unexpand_trivial_usage \ "[-fa][-t N] [FILE]..." \ #define unexpand_full_usage "\n\n" \ "Convert spaces to tabs, writing to stdout\n" \ "\n -a Convert all blanks" \ "\n -f Convert only leading blanks" \ "\n -t N Tabstops every N chars" \ #define expr_trivial_usage \ "EXPRESSION" \ #define expr_full_usage "\n\n" \ "Print the value of EXPRESSION\n" \ "\n" \ "EXPRESSION may be:\n" \ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \ " ARG1 <= ARG2\n" \ " ARG1 = ARG2\n" \ " ARG1 != ARG2\n" \ " ARG1 >= ARG2\n" \ " ARG1 > ARG2\n" \ " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \ " ARG1 - ARG2\n" \ " ARG1 * ARG2\n" \ " ARG1 / ARG2\n" \ " ARG1 % ARG2\n" \ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ " match STRING REGEXP Same as STRING : REGEXP\n" \ " substr STRING POS LEN Substring of STRING, POS counts from 1\n" \ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ " length STRING Length of STRING\n" \ " quote TOKEN Interpret TOKEN as a string, even if\n" \ " it is a keyword like 'match' or an\n" \ " operator like '/'\n" \ " (EXPRESSION) Value of EXPRESSION\n" \ "\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between\n" \ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ "of characters matched or 0." \ #define factor_trivial_usage \ "[NUMBER]..." \ #define factor_full_usage "\n\n" \ "Print prime factors" \ #define false_trivial_usage NOUSAGE_STR \ #define false_full_usage "" \ #define false_example_usage \ "$ false\n" \ "$ echo $?\n" \ "1\n" \ #define fold_trivial_usage \ "[-bs] [-w WIDTH] [FILE]..." \ #define fold_full_usage "\n\n" \ "Wrap input lines in FILEs (or stdin), writing to stdout\n" \ "\n -b Count bytes rather than columns" \ "\n -s Break at spaces" \ "\n -w Use WIDTH columns instead of 80" \ #define head_trivial_usage \ "[OPTIONS] [FILE]..." \ #define head_full_usage "\n\n" \ "Print first 10 lines of FILEs (or stdin).\n" \ "With more than one FILE, precede each with a filename header.\n" \ "\n -n N[bkm] Print first N lines" \ IF_FEATURE_FANCY_HEAD( \ "\n -n -N[bkm] Print all except N last lines" \ "\n -c [-]N[bkm] Print first N bytes" \ ) \ "\n (b:*512 k:*1024 m:*1024^2)" \ IF_FEATURE_FANCY_HEAD( \ "\n -q Never print headers" \ "\n -v Always print headers" \ ) \ #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" \ #define hostid_trivial_usage \ "" \ #define hostid_full_usage "\n\n" \ "Print out a unique 32-bit identifier for the machine" \ #define id_trivial_usage \ "[-ugGnr"IF_SELINUX("Z")"] [USER]" \ #define id_full_usage "\n\n" \ "Print information about USER or the current user\n" \ IF_SELINUX( \ "\n -Z Security context" \ ) \ "\n -u User ID" \ "\n -g Group ID" \ "\n -G Supplementary group IDs" \ "\n -n Print names instead of numbers" \ "\n -r Print real ID instead of effective ID" \ #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" \ #define groups_trivial_usage \ "[USER]" \ #define groups_full_usage "\n\n" \ "Print the groups USER is in" \ #define groups_example_usage \ "$ groups\n" \ "andersen lp dialout cdrom floppy\n" \ #define install_trivial_usage \ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [-t DIR] [SOURCE]... DEST" \ #define install_full_usage "\n\n" \ "Copy files and set attributes\n" \ "\n -c Just copy (default)" \ "\n -d Create directories" \ "\n -D Create leading target directories" \ "\n -s Strip symbol table" \ "\n -p Preserve date" \ "\n -o USER Set ownership" \ "\n -g GRP Set group ownership" \ "\n -m MODE Set permissions" \ "\n -t DIR Install to DIR" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define link_trivial_usage \ "FILE LINK" \ #define link_full_usage "\n\n" \ "Create hard LINK to FILE" \ #define ln_trivial_usage \ "[-sfnbtv] [-S SUF] TARGET... LINK|DIR" \ #define ln_full_usage "\n\n" \ "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \ "\n -s Make symlinks instead of hardlinks" \ "\n -f Remove existing destinations" \ "\n -n Don't dereference symlinks - treat like normal file" \ "\n -b Make a backup of the target (if exists) before link operation" \ "\n -S SUF Use suffix instead of ~ when making backup files" \ "\n -T Treat LINK as a file, not DIR" \ "\n -v Verbose" \ #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" \ #define logname_trivial_usage \ "" \ #define logname_full_usage "\n\n" \ "Print the name of the current user" \ #define logname_example_usage \ "$ logname\n" \ "root\n" \ #define ls_trivial_usage \ "[-1AaCxd" \ IF_FEATURE_LS_FOLLOWLINKS("LH") \ IF_FEATURE_LS_RECURSIVE("R") \ IF_FEATURE_LS_FILETYPES("Fp") "lins" \ IF_FEATURE_HUMAN_READABLE("h") \ IF_FEATURE_LS_SORTFILES("rSXv") \ IF_FEATURE_LS_TIMESTAMPS("ctu") \ IF_SELINUX("kZ") "]" \ IF_FEATURE_LS_WIDTH(" [-w WIDTH]") " [FILE]..." \ #define ls_full_usage "\n\n" \ "List directory contents\n" \ "\n -1 One column output" \ "\n -a Include names starting with ." \ "\n -A Like -a, but exclude . and .." \ "\n -x List by lines" \ "\n -d List directory names, not contents" \ IF_FEATURE_LS_FOLLOWLINKS( \ "\n -L Follow symlinks" \ "\n -H Follow symlinks on command line" \ ) \ IF_FEATURE_LS_RECURSIVE( \ "\n -R Recurse" \ ) \ IF_FEATURE_LS_FILETYPES( \ "\n -p Append / to directory names" \ "\n -F Append indicator (one of */=@|) to names" \ ) \ "\n -l Long format" \ "\n -i List inode numbers" \ "\n -n List numeric UIDs and GIDs instead of names" \ "\n -s List allocated blocks" \ IF_FEATURE_LS_TIMESTAMPS( \ "\n -lc List ctime" \ "\n -lu List atime" \ ) \ IF_FEATURE_LS_TIMESTAMPS(IF_LONG_OPTS( \ "\n --full-time List full date/time" \ )) \ IF_FEATURE_HUMAN_READABLE( \ "\n -h Human readable sizes (1K 243M 2G)" \ ) \ IF_FEATURE_LS_SORTFILES( \ IF_LONG_OPTS( \ "\n --group-directories-first" \ ) \ "\n -S Sort by size" \ "\n -X Sort by extension" \ "\n -v Sort by version" \ ) \ IF_FEATURE_LS_TIMESTAMPS( \ "\n -t Sort by mtime" \ "\n -tc Sort by ctime" \ "\n -tu Sort by atime" \ ) \ "\n -r Reverse sort order" \ IF_SELINUX( \ "\n -Z List security context and permission" \ ) \ IF_FEATURE_LS_WIDTH( \ "\n -w N Format N columns wide" \ ) \ IF_FEATURE_LS_COLOR( \ "\n --color[={always,never,auto}]" \ ) \ #define md5sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define md5sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ "$ md5sum busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "$ md5sum -c -\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "busybox: OK\n" \ "^D\n" \ #define sha1sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha1sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha256sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha256sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha512sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha512sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha3sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[-a BITS] [FILE]..." \ #define sha3sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA3 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ "\n -a BITS 224 (default), 256, 384, 512" \ #define mkdir_trivial_usage \ "[-m MODE] [-p] DIRECTORY..." \ #define mkdir_full_usage "\n\n" \ "Create DIRECTORY\n" \ "\n -m MODE Mode" \ "\n -p No error if exists; make parent directories as needed" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define mkdir_example_usage \ "$ mkdir /tmp/foo\n" \ "$ mkdir /tmp/foo\n" \ "/tmp/foo: File exists\n" \ "$ mkdir /tmp/foo/bar/baz\n" \ "/tmp/foo/bar/baz: No such file or directory\n" \ "$ mkdir -p /tmp/foo/bar/baz\n" \ #define mkfifo_trivial_usage \ "[-m MODE] " IF_SELINUX("[-Z] ") "NAME" \ #define mkfifo_full_usage "\n\n" \ "Create named pipe\n" \ "\n -m MODE Mode (default a=rw)" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define mknod_trivial_usage \ "[-m MODE] " IF_SELINUX("[-Z] ") "NAME TYPE [MAJOR MINOR]" \ #define mknod_full_usage "\n\n" \ "Create a special file (block, character, or pipe)\n" \ "\n -m MODE Creation mode (default a=rw)" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ "\nTYPE:" \ "\n b Block device" \ "\n c or u Character device" \ "\n p Named pipe (MAJOR MINOR must be omitted)" \ #define mknod_example_usage \ "$ mknod /dev/fd0 b 2 0\n" \ "$ mknod -m 644 /tmp/pipe p\n" \ #define mktemp_trivial_usage \ "[-dt] [-p DIR] [TEMPLATE]" \ #define mktemp_full_usage "\n\n" \ "Create a temporary file with name based on TEMPLATE and print its name.\n" \ "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \ "Without TEMPLATE, -t tmp.XXXXXX is assumed.\n" \ "\n -d Make directory, not file" \ "\n -q Fail silently on errors" \ "\n -t Prepend base directory name to TEMPLATE" \ "\n -p DIR Use DIR as a base directory (implies -t)" \ "\n -u Do not create anything; print a name" \ "\n" \ "\nBase directory is: -p DIR, else $TMPDIR, else /tmp" \ #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ "/tmp/temp.mWiLjM\n" \ "$ ls -la /tmp/temp.mWiLjM\n" \ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" \ #define mv_trivial_usage \ "[-finT] SOURCE DEST\n" \ "or: mv [-fin] SOURCE... { -t DIRECTORY | DIRECTORY }" \ #define mv_full_usage "\n\n" \ "Rename SOURCE to DEST, or move SOURCEs to DIRECTORY\n" \ "\n -f Don't prompt before overwriting" \ "\n -i Interactive, prompt before overwrite" \ "\n -n Don't overwrite an existing file" \ "\n -T Refuse to move if DEST is a directory" \ "\n -t DIR Move all SOURCEs into DIR" \ #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" \ #define nice_trivial_usage \ "[-n ADJUST] [PROG ARGS]" \ #define nice_full_usage "\n\n" \ "Change scheduling priority, run PROG\n" \ "\n -n ADJUST Adjust priority by ADJUST" \ #define nl_trivial_usage \ "[OPTIONS] [FILE]..." \ #define nl_full_usage "\n\n" \ "Write FILEs to standard output with line numbers added\n" \ "\n -b STYLE Which lines to number - a: all, t: nonempty, n: none" \ "\n -i N Line number increment" \ "\n -s STRING Use STRING as line number separator" \ "\n -v N Start from N" \ "\n -w N Width of line numbers" \ #define nohup_trivial_usage \ "PROG ARGS" \ #define nohup_full_usage "\n\n" \ "Run PROG immune to hangups, with output to a non-tty" \ #define nohup_example_usage \ "$ nohup make &" \ #define nproc_trivial_usage \ ""IF_LONG_OPTS("[--all] [--ignore=N]") \ #define nproc_full_usage "\n\n" \ "Print number of available CPUs" \ IF_LONG_OPTS( \ "\n" \ "\n --all Number of installed CPUs" \ "\n --ignore=N Exclude N CPUs" \ ) \ #if !ENABLE_DESKTOP \ #define od_trivial_usage \ "[-aBbcDdeFfHhIiLlOovXx] [FILE]" \ #define od_full_usage "\n\n" \ "Print FILE (or stdin) unambiguously, as octal bytes by default" \ #endif \ #if ENABLE_DESKTOP \ #define od_trivial_usage \ "[-abcdfhilovxs] [-t TYPE] [-A RADIX] [-N SIZE] [-j SKIP] [-S MINSTR] [-w WIDTH] [FILE]..." \ #define od_full_usage "\n\n" \ "Print FILEs (or stdin) unambiguously, as octal bytes by default" \ #endif \ #define paste_trivial_usage \ "[-d LIST] [-s] [FILE]..." \ #define paste_full_usage "\n\n" \ "Paste lines from each input file, separated with tab\n" \ "\n -d LIST Use delimiters from LIST, not tab" \ "\n -s Serial: one file at a time" \ #define paste_example_usage \ "# write out directory in four columns\n" \ "$ ls | paste - - - -\n" \ "# combine pairs of lines from a file into single lines\n" \ "$ paste -s -d '\\t\\n' file\n" \ #define printenv_trivial_usage \ "[VARIABLE]..." \ #define printenv_full_usage "\n\n" \ "Print environment VARIABLEs.\n" \ "If no VARIABLE specified, print all." \ #define printf_trivial_usage \ "FORMAT [ARG]..." \ #define printf_full_usage "\n\n" \ "Format and print ARG(s) according to FORMAT (a-la C printf)" \ #define printf_example_usage \ "$ printf \"Val=%d\\n\" 5\n" \ "Val=5\n" \ #define pwd_trivial_usage \ "" \ #define pwd_full_usage "\n\n" \ "Print the full filename of the current working directory" \ #define pwd_example_usage \ "$ pwd\n" \ "/root\n" \ #define readlink_trivial_usage \ IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE" \ #define readlink_full_usage "\n\n" \ "Display the value of a symlink" \ IF_FEATURE_READLINK_FOLLOW( "\n" \ "\n -f Canonicalize by following all symlinks" \ "\n -n Don't add newline" \ "\n -v Verbose" \ ) \ #define realpath_trivial_usage \ "FILE..." \ #define realpath_full_usage "\n\n" \ "Print absolute pathnames of FILEs" \ #define rm_trivial_usage \ "[-irf] FILE..." \ #define rm_full_usage "\n\n" \ "Remove (unlink) FILEs\n" \ "\n -i Always prompt before removing" \ "\n -f Never prompt" \ "\n -R,-r Recurse" \ #define rm_example_usage \ "$ rm -rf /tmp/foo\n" \ #define rmdir_trivial_usage \ "[-p] DIRECTORY..." \ #define rmdir_full_usage "\n\n" \ "Remove DIRECTORY if it is empty\n" \ "\n -p Include parents" \ IF_LONG_OPTS( \ "\n --ignore-fail-on-non-empty" \ ) \ #define rmdir_example_usage \ "# rmdir /tmp/foo\n" \ #define seq_trivial_usage \ "[-w] [-s SEP] [FIRST [INC]] LAST" \ #define seq_full_usage "\n\n" \ "Print numbers from FIRST to LAST, in steps of INC.\n" \ "FIRST, INC default to 1.\n" \ "\n -w Pad to last with leading zeros" \ "\n -s SEP String separator" \ #define shred_trivial_usage \ "[-fuz] [-n N] [-s SIZE] FILE..." \ #define shred_full_usage "\n\n" \ "Overwrite/delete FILEs\n" \ "\n -f Chmod to ensure writability" \ "\n -s SIZE Size to write" \ "\n -n N Overwrite N times (default 3)" \ "\n -z Final overwrite with zeros" \ "\n -u Remove file" \ #define shuf_trivial_usage \ "[-n NUM] [-o FILE] [-z] [FILE | -e [ARG...] | -i L-H]" \ #define shuf_full_usage "\n\n" \ "Randomly permute lines\n" \ "\n -n NUM Output at most NUM lines" \ "\n -o FILE Write to FILE, not standard output" \ "\n -z NUL terminated output" \ "\n -e Treat ARGs as lines" \ "\n -i L-H Treat numbers L-H as lines" \ #define sleep_trivial_usage \ IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...") \ #define sleep_full_usage "\n\n" \ IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \ IF_FEATURE_FANCY_SLEEP( \ "Pause for a time equal to the total of the args given, where each arg can\n" \ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") \ #define sleep_example_usage \ "$ sleep 2\n" \ "[2 second delay results]\n" \ IF_FEATURE_FANCY_SLEEP( \ "$ sleep 1d 3h 22m 8s\n" \ "[98528 second delay results]\n") \ #define sort_trivial_usage \ "[-nru" \ IF_FEATURE_SORT_BIG("ghMcszbdfiokt] [-o FILE] [-k START[.OFS][OPTS][,END[.OFS][OPTS]] [-t CHAR") \ "] [FILE]..." \ #define sort_full_usage "\n\n" \ "Sort lines of text\n" \ IF_FEATURE_SORT_BIG( \ "\n -o FILE Output to FILE" \ "\n -c Check whether input is sorted" \ "\n -b Ignore leading blanks" \ "\n -f Ignore case" \ "\n -i Ignore unprintable characters" \ "\n -d Dictionary order (blank or alphanumeric only)" \ ) \ "\n -n Sort numbers" \ IF_FEATURE_SORT_BIG( \ "\n -g General numerical sort" \ "\n -h Sort human readable numbers (2K 1G)" \ "\n -M Sort month" \ "\n -V Sort version" \ "\n -t CHAR Field separator" \ "\n -k N[,M] Sort by Nth field" \ ) \ "\n -r Reverse sort order" \ "\n -s Stable (don't sort ties alphabetically)" \ "\n -u Suppress duplicate lines" \ "\n -z NUL terminated input and output" \ #define sort_example_usage \ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ "a\n" \ "b\n" \ "c\n" \ "d\n" \ "e\n" \ "f\n" \ IF_FEATURE_SORT_BIG( \ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ "d 2\n" \ "b 2\n" \ "c 3\n" \ ) \ "" \ #define split_trivial_usage \ "[OPTIONS] [INPUT [PREFIX]]" \ #define split_full_usage "\n\n" \ " -b N[k|m] Split by N (kilo|mega)bytes" \ "\n -l N Split by N lines" \ "\n -a N Use N letters as suffix" \ #define split_example_usage \ "$ split TODO foo\n" \ "$ cat TODO | split -a 2 -l 2 TODO_\n" \ #define stat_trivial_usage \ "[-lt"IF_FEATURE_STAT_FILESYSTEM("f")"] "IF_FEATURE_STAT_FORMAT("[-c FMT] ")"FILE..." \ #define stat_full_usage "\n\n" \ "Display file" \ IF_FEATURE_STAT_FILESYSTEM(" (default) or filesystem") \ " status\n" \ IF_FEATURE_STAT_FORMAT( \ "\n -c FMT Use the specified format" \ ) \ IF_FEATURE_STAT_FILESYSTEM( \ "\n -f Display filesystem status" \ ) \ "\n -L Follow links" \ "\n -t Terse display" \ IF_SELINUX( \ "\n -Z Print security context" \ ) \ IF_FEATURE_STAT_FORMAT( \ "\n\nFMT sequences"IF_FEATURE_STAT_FILESYSTEM(" for files")":\n" \ " %a Access rights in octal\n" \ " %A Access rights in human readable form\n" \ " %b Number of blocks allocated (see %B)\n" \ " %B Size in bytes of each block reported by %b\n" \ " %d Device number in decimal\n" \ " %D Device number in hex\n" \ " %f Raw mode in hex\n" \ " %F File type\n" \ " %g Group ID\n" \ " %G Group name\n" \ " %h Number of hard links\n" \ " %i Inode number\n" \ " %n File name\n" \ " %N File name, with -> TARGET if symlink\n" \ " %o I/O block size\n" \ " %s Total size in bytes\n" \ " %t Major device type in hex\n" \ " %T Minor device type in hex\n" \ " %u User ID\n" \ " %U User name\n" \ " %x Time of last access\n" \ " %X Time of last access as seconds since Epoch\n" \ " %y Time of last modification\n" \ " %Y Time of last modification as seconds since Epoch\n" \ " %z Time of last change\n" \ " %Z Time of last change as seconds since Epoch\n" \ IF_FEATURE_STAT_FILESYSTEM( \ "\nFMT sequences for file systems:\n" \ " %a Free blocks available to non-superuser\n" \ " %b Total data blocks\n" \ " %c Total file nodes\n" \ " %d Free file nodes\n" \ " %f Free blocks\n" \ IF_SELINUX( \ " %C Security context in selinux\n" \ ) \ " %i File System ID in hex\n" \ " %l Maximum length of filenames\n" \ " %n File name\n" \ " %s Block size (for faster transfer)\n" \ " %S Fundamental block size (for block counts)\n" \ " %t Type in hex\n" \ " %T Type in human readable form" \ ) \ ) \ #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." \ #define stty_full_usage "\n\n" \ "Without arguments, prints baud rate, line discipline,\n" \ "and deviations from stty sane\n" \ "\n -F DEVICE Open device instead of stdin" \ "\n -a Print all current settings in human-readable form" \ "\n -g Print in stty-readable form" \ "\n [SETTING] See manpage" \ #define sum_trivial_usage \ "[-rs] [FILE]..." \ #define sum_full_usage "\n\n" \ "Checksum and count the blocks in a file\n" \ "\n -r Use BSD sum algorithm (1K blocks)" \ "\n -s Use System V sum algorithm (512byte blocks)" \ #define sync_trivial_usage \ ""IF_FEATURE_SYNC_FANCY("[-df] [FILE]...") \ #define sync_full_usage "\n\n" \ IF_NOT_FEATURE_SYNC_FANCY( \ "Write all buffered blocks to disk" \ ) \ IF_FEATURE_SYNC_FANCY( \ "Write all buffered blocks (in FILEs) to disk" \ "\n -d Avoid syncing metadata" \ "\n -f Sync filesystems underlying FILEs" \ ) \ #define fsync_trivial_usage \ "[-d] FILE..." \ #define fsync_full_usage "\n\n" \ "Write all buffered blocks in FILEs to disk\n" \ "\n -d Avoid syncing metadata" \ #define tac_trivial_usage \ "[FILE]..." \ #define tac_full_usage "\n\n" \ "Concatenate FILEs and print them in reverse" \ #define tail_trivial_usage \ "[OPTIONS] [FILE]..." \ #define tail_full_usage "\n\n" \ "Print last 10 lines of FILEs (or stdin) to.\n" \ "With more than one FILE, precede each with a filename header.\n" \ "\n -c [+]N[bkm] Print last N bytes" \ "\n -n N[bkm] Print last N lines" \ "\n -n +N[bkm] Start on Nth line and print the rest" \ "\n (b:*512 k:*1024 m:*1024^2)" \ IF_FEATURE_FANCY_TAIL( \ "\n -q Never print headers" \ "\n -v Always print headers" \ ) \ "\n -f Print data as file grows" \ IF_FEATURE_FANCY_TAIL( \ "\n -F Same as -f, but keep retrying" \ "\n -s SECONDS Wait SECONDS between reads with -f" \ ) \ #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" \ #define tee_trivial_usage \ "[-ai] [FILE]..." \ #define tee_full_usage "\n\n" \ "Copy stdin to each FILE, and also to stdout\n" \ "\n -a Append to the given FILEs, don't overwrite" \ "\n -i Ignore interrupt signals (SIGINT)" \ #define tee_example_usage \ "$ echo \"Hello\" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ "Hello\n" \ #define test_trivial_usage NOUSAGE_STR \ #define test_full_usage "" \ #define test_example_usage \ "$ test 1 -eq 2\n" \ "$ echo $?\n" \ "1\n" \ "$ test 1 -eq 1\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /etc ]\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /junk ]\n" \ "$ echo $?\n" \ "1\n" \ #define timeout_trivial_usage \ "[-s SIG] [-k KILL_SECS] SECS PROG ARGS" \ #define timeout_full_usage "\n\n" \ "Run PROG. Send SIG to it if it is not gone in SECS seconds.\n" \ "Default SIG: TERM." \ "If it still exists in KILL_SECS seconds, send KILL.\n" \ #define touch_trivial_usage \ "[-ch" IF_FEATURE_TOUCH_SUSV3("am") "]" \ IF_FEATURE_TOUCH_SUSV3(" [-d DATE] [-t DATE] [-r FILE]") \ " FILE..." \ #define touch_full_usage "\n\n" \ "Update mtime of FILEs\n" \ "\n -c Don't create files" \ "\n -h Don't follow links" \ IF_FEATURE_TOUCH_SUSV3( \ "\n -a Change only atime" \ "\n -m Change only mtime" \ "\n -d DT Date/time to use" \ "\n -t DT Date/time to use" \ "\n -r FILE Use FILE's date/time" \ ) \ #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ "$ touch /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" \ #define tr_trivial_usage \ "[-cds] STRING1 [STRING2]" \ #define tr_full_usage "\n\n" \ "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \ "\n -c Take complement of STRING1" \ "\n -d Delete input characters coded STRING1" \ "\n -s Squeeze multiple output characters of STRING2 into one character" \ #define tr_example_usage \ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ "hello world\n" \ #define true_trivial_usage NOUSAGE_STR \ #define true_full_usage "" \ #define true_example_usage \ "$ true\n" \ "$ echo $?\n" \ "0\n" \ #define truncate_trivial_usage \ "[-c] -s SIZE FILE..." \ #define truncate_full_usage "\n\n" \ "Truncate FILEs to SIZE\n" \ "\n -c Do not create files" \ "\n -s SIZE" \ #define truncate_example_usage \ "$ truncate -s 1G foo" \ #define tsort_trivial_usage \ "[FILE]" \ #define tsort_full_usage "\n\n" \ "Topological sort" \ #define tsort_example_usage \ "$ echo -e \"a b\\nb c\" | tsort\n" \ "a\n" \ "b\n" \ "c\n" \ #define tty_trivial_usage \ "" IF_INCLUDE_SUSv2("[-s]") \ #define tty_full_usage "\n\n" \ "Print file name of stdin's terminal" \ IF_INCLUDE_SUSv2( "\n" \ "\n -s Print nothing, only return exit status" \ ) \ #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" \ #define uname_trivial_usage \ "[-amnrspvio]" \ #define uname_full_usage "\n\n" \ "Print system information\n" \ "\n -a Print all" \ "\n -m Machine (hardware) type" \ "\n -n Hostname" \ "\n -r Kernel release" \ "\n -s Kernel name (default)" \ "\n -p Processor type" \ "\n -v Kernel version" \ "\n -i Hardware platform" \ "\n -o OS name" \ #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" \ #define arch_trivial_usage \ "" \ #define arch_full_usage "\n\n" \ "Print system architecture" \ #define uniq_trivial_usage \ "[-cduiz] [-f,s,w N] [FILE [OUTFILE]]" \ #define uniq_full_usage "\n\n" \ "Discard duplicate lines\n" \ "\n -c Prefix lines by the number of occurrences" \ "\n -d Only print duplicate lines" \ "\n -u Only print unique lines" \ "\n -i Ignore case" \ "\n -z NUL terminated output" \ "\n -f N Skip first N fields" \ "\n -s N Skip first N chars (after any skipped fields)" \ "\n -w N Compare N characters in line" \ #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ "b\n" \ "c\n" \ #define unlink_trivial_usage \ "FILE" \ #define unlink_full_usage "\n\n" \ "Delete FILE by calling unlink()" \ #define usleep_trivial_usage \ "N" \ #define usleep_full_usage "\n\n" \ "Pause for N microseconds" \ #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" \ #define uudecode_trivial_usage \ "[-o OUTFILE] [INFILE]" \ #define uudecode_full_usage "\n\n" \ "Uudecode a file\n" \ "Finds OUTFILE in uuencoded source unless -o is given" \ #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" \ #define base32_trivial_usage \ "[-d] [-w COL] [FILE]" \ #define base32_full_usage "\n\n" \ "Base32 encode or decode FILE to standard output\n" \ "\n -d Decode data" \ "\n -w COL Wrap lines at COL (default 76, 0 disables)" \ #define base64_trivial_usage \ "[-d] [-w COL] [FILE]" \ #define base64_full_usage "\n\n" \ "Base64 encode or decode FILE to standard output\n" \ "\n -d Decode data" \ "\n -w COL Wrap lines at COL (default 76, 0 disables)" \ #define uuencode_trivial_usage \ "[-m] [FILE] STORED_FILENAME" \ #define uuencode_full_usage "\n\n" \ "Uuencode FILE (or stdin) to stdout\n" \ "\n -m Use base64 encoding per RFC1521" \ #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ "\n" \ "$ uudecode busybox busybox > busybox.uu\n" \ "$\n" \ #define wc_trivial_usage \ "[-c"IF_UNICODE_SUPPORT("m")"lwL] [FILE]..." \ #define wc_full_usage "\n\n" \ "Count lines, words, and bytes for FILEs (or stdin)\n" \ "\n -c Count bytes" \ IF_UNICODE_SUPPORT( \ "\n -m Count characters" \ ) \ "\n -l Count newlines" \ "\n -w Count words" \ "\n -L Print longest line length" \ #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" \ #define users_trivial_usage \ "" \ #define users_full_usage "\n\n" \ "Print the users currently logged on" \ #define w_trivial_usage \ "" \ #define w_full_usage "\n\n" \ "Show who is logged on" \ #define who_trivial_usage \ "[-aH]" \ #define who_full_usage "\n\n" \ "Show who is logged on\n" \ "\n -a Show all" \ "\n -H Print column headers" \ #define whoami_trivial_usage \ "" \ #define whoami_full_usage "\n\n" \ "Print the user name associated with the current effective user id" \ #define yes_trivial_usage \ "[STRING]" \ #define yes_full_usage "\n\n" \ "Repeatedly print a line with STRING, or 'y'" \ #define pipe_progress_trivial_usage NOUSAGE_STR \ #define pipe_progress_full_usage "" \ #define run_parts_trivial_usage \ "[-a ARG]... [-u UMASK] " \ IF_FEATURE_RUN_PARTS_LONG_OPTIONS("[--reverse] [--test] [--exit-on-error] "IF_FEATURE_RUN_PARTS_FANCY("[--list] ")) \ "DIRECTORY" \ #define run_parts_full_usage "\n\n" \ "Run a bunch of scripts in DIRECTORY\n" \ "\n -a ARG Pass ARG as argument to scripts" \ "\n -u UMASK Set UMASK before running scripts" \ IF_FEATURE_RUN_PARTS_LONG_OPTIONS( \ "\n --reverse Reverse execution order" \ "\n --test Dry run" \ "\n --exit-on-error Exit if a script exits with non-zero" \ IF_FEATURE_RUN_PARTS_FANCY( \ "\n --list Print names of matching files even if they are not executable" \ ) \ ) \ #define run_parts_example_usage \ "$ run-parts -a start /etc/init.d\n" \ "$ run-parts -a stop=now /etc/init.d\n\n" \ "Let's assume you have a script foo/dosomething:\n" \ "#!/bin/sh\n" \ "for i in $*; do eval $i; done; unset i\n" \ "case \"$1\" in\n" \ "start*) echo starting something;;\n" \ "stop*) set -x; shutdown -h $stop;;\n" \ "esac\n\n" \ "Running this yields:\n" \ "$run-parts -a stop=+4m foo/\n" \ "+ shutdown -h +4m" \ #define start_stop_daemon_trivial_usage \ "[OPTIONS] [-S|-K] ... [-- ARGS...]" \ #define start_stop_daemon_full_usage "\n\n" \ "Search for matching processes, and then\n" \ "-K: stop all matching processes\n" \ "-S: start a process unless a matching process is found\n" \ "\nProcess matching:" \ "\n -u USERNAME|UID Match only this user's processes" \ "\n -n NAME Match processes with NAME" \ "\n in comm field in /proc/PID/stat" \ "\n -x EXECUTABLE Match processes with this command" \ "\n in /proc/PID/cmdline" \ "\n -p FILE Match a process with PID from FILE" \ "\n All specified conditions must match" \ "\n-S only:" \ "\n -x EXECUTABLE Program to run" \ "\n -a NAME Zeroth argument" \ "\n -b Background" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -N N Change nice level" \ ) \ "\n -c USER[:[GRP]] Change user/group" \ "\n -m Write PID to pidfile specified by -p" \ "\n-K only:" \ "\n -s SIG Signal to send" \ "\n -t Match only, exit with 0 if found" \ "\nOther:" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o Exit with status 0 if nothing is done" \ "\n -v Verbose" \ ) \ "\n -q Quiet" \ #define which_trivial_usage \ "[-a] COMMAND..." \ #define which_full_usage "\n\n" \ "Locate COMMAND\n" \ "\n -a Show all matches" \ #define which_example_usage \ "$ which login\n" \ "/bin/login\n" \ #define chattr_trivial_usage \ "[-R] [-v VERSION] [-p PROJID] [-+=AacDdijsStTu] FILE..." \ #define chattr_full_usage "\n\n" \ "Change ext2 file attributes\n" \ "\n -R Recurse" \ "\n -v NUM Set version/generation number" \ "\n -p NUM Set project number" \ "\nModifiers:" \ "\n -,+,= Remove/add/set attributes" \ "\nAttributes:" \ "\n A No atime" \ "\n a Append only" \ "\n C No copy-on-write" \ "\n c Compressed" \ "\n D Synchronous dir updates" \ "\n d Don't backup with dump" \ "\n E Encrypted" \ "\n e File uses extents" \ "\n F Case-insensitive dir" \ "\n I Indexed dir" \ "\n i Immutable" \ "\n j Write data to journal first" \ "\n N File is stored in inode" \ "\n P Hierarchical project ID dir" \ "\n S Synchronous file updates" \ "\n s Zero storage when deleted" \ "\n T Top of dir hierarchy" \ "\n t Don't tail-merge with other files" \ "\n u Allow undelete" \ "\n V Verity" \ #define fsck_trivial_usage \ "[-ANPRTV] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..." \ #define fsck_full_usage "\n\n" \ "Check and repair filesystems\n" \ "\n -A Walk /etc/fstab and check all filesystems" \ "\n -N Don't execute, just show what would be done" \ "\n -P With -A, check filesystems in parallel" \ "\n -R With -A, skip the root filesystem" \ "\n -T Don't show title on startup" \ "\n -V Verbose" \ "\n -t TYPE List of filesystem types to check" \ #define lsattr_trivial_usage \ "[-Radlpv] [FILE]..." \ #define lsattr_full_usage "\n\n" \ "List ext2 file attributes\n" \ "\n -R Recurse" \ "\n -a Include names starting with ." \ "\n -d List directory names, not contents" \ "\n -l List long flag names" \ "\n -p List project ID" \ "\n -v List version/generation number" \ #define tune2fs_trivial_usage \ "[-c MAX_MOUNT_COUNT] " \ "[-i DAYS] " \ "[-C MOUNT_COUNT] " \ "[-L LABEL] " \ "BLOCKDEV" \ #define tune2fs_full_usage "\n\n" \ "Adjust filesystem options on ext[23] filesystems" \ #define awk_trivial_usage \ "[OPTIONS] [AWK_PROGRAM] [FILE]..." \ #define awk_full_usage "\n\n" \ " -v VAR=VAL Set variable" \ "\n -F SEP Use SEP as field separator" \ "\n -f FILE Read program from FILE" \ IF_FEATURE_AWK_GNU_EXTENSIONS( \ "\n -e AWK_PROGRAM" \ ) \ #define cmp_trivial_usage \ "[-ls] [-n NUM] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]" \ #define cmp_full_usage "\n\n" \ "Compare FILE1 with FILE2 (or stdin)\n" \ "\n -l Write the byte numbers (decimal) and values (octal)" \ "\n for all differing bytes" \ "\n -s Quiet" \ "\n -n NUM Compare at most NUM bytes" \ #define diff_trivial_usage \ "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" \ #define diff_full_usage "\n\n" \ "Compare files line by line and output the differences between them.\n" \ "This implementation supports unified diffs only.\n" \ "\n -a Treat all files as text" \ "\n -b Ignore changes in the amount of whitespace" \ "\n -B Ignore changes whose lines are all blank" \ "\n -d Try hard to find a smaller set of changes" \ "\n -i Ignore case differences" \ "\n -L Use LABEL instead of the filename in the unified header" \ "\n -N Treat absent files as empty" \ "\n -q Output only whether files differ" \ "\n -r Recurse" \ "\n -S Start with FILE when comparing directories" \ "\n -T Make tabs line up by prefixing a tab when necessary" \ "\n -s Report when two files are the same" \ "\n -t Expand tabs to spaces in output" \ "\n -U Output LINES lines of context" \ "\n -w Ignore all whitespace" \ #define ed_trivial_usage "[-p PROMPT] [-s] [FILE]" \ #define ed_full_usage "" \ #define patch_trivial_usage \ "[-RNE] [-p N] [-i DIFF] [ORIGFILE [PATCHFILE]]" \ #define patch_full_usage "\n\n" \ " -p N Strip N leading components from file names" \ "\n -i DIFF Read DIFF instead of stdin" \ "\n -R Reverse patch" \ "\n -N Ignore already applied patches" \ "\n -E Remove output files if they become empty" \ IF_LONG_OPTS( \ "\n --dry-run Don't actually change files" \ ) \ #define patch_example_usage \ "$ patch -p1 < example.diff\n" \ "$ patch -p0 -i example.diff" \ #define sed_trivial_usage \ "[-i[SFX]] [-nrE] [-f FILE]... [-e CMD]... [FILE]...\n" \ "or: sed [-i[SFX]] [-nrE] CMD [FILE]..." \ #define sed_full_usage "\n\n" \ " -e CMD Add CMD to sed commands to be executed" \ "\n -f FILE Add FILE contents to sed commands to be executed" \ "\n -i[SFX] Edit files in-place (otherwise write to stdout)" \ "\n Optionally back files up, appending SFX" \ "\n -n Suppress automatic printing of pattern space" \ "\n -r,-E Use extended regex syntax" \ "\n" \ "\nIf no -e or -f, the first non-option argument is the sed command string." \ "\nRemaining arguments are input files (stdin if none)." \ #define sed_example_usage \ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ "bar\n" \ #define vi_trivial_usage \ IF_FEATURE_VI_COLON("[-c CMD] ")IF_FEATURE_VI_READONLY("[-R] ")"[-H] [FILE]..." \ #define vi_full_usage "\n\n" \ "Edit FILE\n" \ IF_FEATURE_VI_COLON( \ "\n -c CMD Initial command to run ($EXINIT and ~/.exrc also available)" \ ) \ IF_FEATURE_VI_READONLY( \ "\n -R Read-only" \ ) \ "\n -H List available features" \ #define find_trivial_usage \ "[-HL] [PATH]... [OPTIONS] [ACTIONS]" \ #define find_full_usage "\n\n" \ "Search for files and perform actions on them.\n" \ "First failed action stops processing of current file.\n" \ "Defaults: PATH is current directory, action is '-print'\n" \ "\n -L,-follow Follow symlinks" \ "\n -H ...on command line only" \ IF_FEATURE_FIND_XDEV( \ "\n -xdev Don't descend directories on other filesystems" \ ) \ IF_FEATURE_FIND_MAXDEPTH( \ "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \ "\n actions to command line arguments only" \ "\n -mindepth N Don't act on first N levels" \ ) \ IF_FEATURE_FIND_DEPTH( \ "\n -depth Act on directory *after* traversing it" \ ) \ "\n" \ "\nActions:" \ IF_FEATURE_FIND_PAREN( \ "\n ( ACTIONS ) Group actions for -o / -a" \ ) \ IF_FEATURE_FIND_NOT( \ "\n ! ACT Invert ACT's success/failure" \ ) \ "\n ACT1 [-a] ACT2 If ACT1 fails, stop, else do ACT2" \ "\n ACT1 -o ACT2 If ACT1 succeeds, stop, else do ACT2" \ "\n Note: -a has higher priority than -o" \ "\n -name PATTERN Match file name (w/o directory name) to PATTERN" \ "\n -iname PATTERN Case insensitive -name" \ IF_FEATURE_FIND_PATH( \ "\n -path PATTERN Match path to PATTERN" \ "\n -ipath PATTERN Case insensitive -path" \ ) \ IF_FEATURE_FIND_REGEX( \ "\n -regex PATTERN Match path to regex PATTERN" \ ) \ IF_FEATURE_FIND_TYPE( \ "\n -type X File type is X (one of: f,d,l,b,c,s,p)" \ ) \ IF_FEATURE_FIND_EXECUTABLE( \ "\n -executable File is executable" \ ) \ IF_FEATURE_FIND_PERM( \ "\n -perm MASK At least one mask bit (+MASK), all bits (-MASK)," \ "\n or exactly MASK bits are set in file's mode" \ ) \ IF_FEATURE_FIND_MTIME( \ "\n -mtime DAYS mtime is greater than (+N), less than (-N)," \ "\n or exactly N days in the past" \ ) \ IF_FEATURE_FIND_ATIME( \ "\n -atime DAYS atime +N/-N/N days in the past" \ ) \ IF_FEATURE_FIND_CTIME( \ "\n -ctime DAYS ctime +N/-N/N days in the past" \ ) \ IF_FEATURE_FIND_MMIN( \ "\n -mmin MINS mtime is greater than (+N), less than (-N)," \ "\n or exactly N minutes in the past" \ ) \ IF_FEATURE_FIND_AMIN( \ "\n -amin MINS atime +N/-N/N minutes in the past" \ ) \ IF_FEATURE_FIND_CMIN( \ "\n -cmin MINS ctime +N/-N/N minutes in the past" \ ) \ IF_FEATURE_FIND_NEWER( \ "\n -newer FILE mtime is more recent than FILE's" \ ) \ IF_FEATURE_FIND_INUM( \ "\n -inum N File has inode number N" \ ) \ IF_FEATURE_FIND_SAMEFILE( \ "\n -samefile FILE File is same as FILE" \ ) \ IF_FEATURE_FIND_USER( \ "\n -user NAME/ID File is owned by given user" \ ) \ IF_FEATURE_FIND_GROUP( \ "\n -group NAME/ID File is owned by given group" \ ) \ IF_FEATURE_FIND_SIZE( \ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \ "\n +/-N: file size is bigger/smaller than N" \ ) \ IF_FEATURE_FIND_LINKS( \ "\n -links N Number of links is greater than (+N), less than (-N)," \ "\n or exactly N" \ ) \ IF_FEATURE_FIND_CONTEXT( \ "\n -context CTX File has specified security context" \ ) \ IF_FEATURE_FIND_EMPTY( \ "\n -empty Match empty file/directory" \ ) \ IF_FEATURE_FIND_PRUNE( \ "\n -prune If current file is directory, don't descend into it" \ ) \ "\nIf none of the following actions is specified, -print is assumed" \ "\n -print Print file name" \ IF_FEATURE_FIND_PRINT0( \ "\n -print0 Print file name, NUL terminated" \ ) \ IF_FEATURE_FIND_EXEC( \ "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by" \ "\n file name. Fails if CMD exits with nonzero" \ ) \ IF_FEATURE_FIND_EXEC_PLUS( \ "\n -exec CMD ARG + Run CMD with {} replaced by list of file names" \ ) \ IF_FEATURE_FIND_DELETE( \ "\n -delete Delete current file/directory. Turns on -depth option" \ ) \ IF_FEATURE_FIND_QUIT( \ "\n -quit Exit" \ ) \ #define find_example_usage \ "$ find / -name passwd\n" \ "/etc/passwd\n" \ #define grep_trivial_usage \ "[-HhnlLoqvsrRiwFE" \ IF_EXTRA_COMPAT("z") \ "] [-m N] " \ IF_FEATURE_GREP_CONTEXT("[-A|B|C N] ") \ "{ PATTERN | -e PATTERN... | -f FILE... } [FILE]..." \ #define grep_full_usage "\n\n" \ "Search for PATTERN in FILEs (or stdin)\n" \ "\n -H Add 'filename:' prefix" \ "\n -h Do not add 'filename:' prefix" \ "\n -n Add 'line_no:' prefix" \ "\n -l Show only names of files that match" \ "\n -L Show only names of files that don't match" \ "\n -c Show only count of matching lines" \ "\n -o Show only the matching part of line" \ "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ "\n -v Select non-matching lines" \ "\n -s Suppress open and read errors" \ "\n -r Recurse" \ "\n -R Recurse and dereference symlinks" \ "\n -i Ignore case" \ "\n -w Match whole words only" \ "\n -x Match whole lines only" \ "\n -F PATTERN is a literal (not regexp)" \ "\n -E PATTERN is an extended regexp" \ IF_EXTRA_COMPAT( \ "\n -z NUL terminated input" \ ) \ "\n -m N Match up to N times per file" \ IF_FEATURE_GREP_CONTEXT( \ "\n -A N Print N lines of trailing context" \ "\n -B N Print N lines of leading context" \ "\n -C N Same as '-A N -B N'" \ ) \ "\n -e PTRN Pattern to match" \ "\n -f FILE Read pattern from file" \ #define grep_example_usage \ "$ grep root /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "$ grep ^[rR]oo. /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ #define egrep_trivial_usage NOUSAGE_STR \ #define egrep_full_usage "" \ #define fgrep_trivial_usage NOUSAGE_STR \ #define fgrep_full_usage "" \ #define xargs_trivial_usage \ "[OPTIONS] [PROG ARGS]" \ #define xargs_full_usage "\n\n" \ "Run PROG on every item given by stdin\n" \ IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ "\n -0 NUL terminated input" \ ) \ IF_FEATURE_XARGS_SUPPORT_ARGS_FILE( \ "\n -a FILE Read from FILE instead of stdin" \ ) \ "\n -o Reopen stdin as /dev/tty" \ "\n -r Don't run command if input is empty" \ "\n -t Print the command on stderr before execution" \ IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ "\n -p Ask user whether to run each command" \ ) \ "\n -E STR,-e[STR] STR stops input processing" \ IF_FEATURE_XARGS_SUPPORT_REPL_STR( \ "\n -I STR Replace STR within PROG ARGS with input line" \ ) \ "\n -n N Pass no more than N args to PROG" \ "\n -s N Pass command line of no more than N bytes" \ IF_FEATURE_XARGS_SUPPORT_PARALLEL( \ "\n -P N Run up to N PROGs in parallel" \ ) \ IF_FEATURE_XARGS_SUPPORT_TERMOPT( \ "\n -x Exit if size is exceeded" \ ) \ #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" \ #define bootchartd_trivial_usage \ "start [PROG ARGS]|stop|init" \ #define bootchartd_full_usage "\n\n" \ "Create /var/log/bootchart.tgz with boot chart data\n" \ "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \ "\nstop: send USR1 to all bootchartd processes" \ "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \ "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \ #define halt_trivial_usage \ "[-d DELAY] [-nf"IF_FEATURE_WTMP("w")"]" \ #define halt_full_usage "\n\n" \ "Halt the system\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ IF_FEATURE_WTMP( \ "\n -w Only write a wtmp record" \ ) \ #define poweroff_trivial_usage \ "[-d DELAY] [-nf]" \ #define poweroff_full_usage "\n\n" \ "Halt and shut off power\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ #define reboot_trivial_usage \ "[-d DELAY] [-nf]" \ #define reboot_full_usage "\n\n" \ "Reboot the system\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ #define linuxrc_trivial_usage NOUSAGE_STR \ #define linuxrc_full_usage "" \ #define init_trivial_usage \ "" \ #define init_full_usage "\n\n" \ "Init is the first process started during boot. It never exits." \ IF_FEATURE_USE_INITTAB( \ "\n""It (re)spawns children according to /etc/inittab." \ "\n""Signals:" \ "\n""HUP: reload /etc/inittab" \ ) \ IF_NOT_FEATURE_USE_INITTAB( \ "\n""This version of init doesn't use /etc/inittab," \ "\n""has fixed set of processed to run." \ "\n""Signals:" \ ) \ "\n""TSTP: stop respawning until CONT" \ "\n""QUIT: re-exec another init" \ "\n""USR1/TERM/USR2/INT: run halt/reboot/poweroff/Ctrl-Alt-Del script" \ #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ "runlevels, use sysvinit.\n" \ "\n" \ "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " ::askfirst:/bin/sh\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/sbin/swapoff -a\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::restart:/sbin/init\n" \ " tty2::askfirst:/bin/sh\n" \ " tty3::askfirst:/bin/sh\n" \ " tty4::askfirst:/bin/sh\n" \ "\n" \ "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ "\n" \ " :::\n" \ "\n" \ " :\n" \ "\n" \ " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ " The id field is used by BusyBox init to specify the controlling tty for\n" \ " the specified process to run on. The contents of this field are\n" \ " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ " be unique, although if it isn't you may have strange results. If this\n" \ " field is left blank, then the init's stdin/out will be used.\n" \ "\n" \ " :\n" \ "\n" \ " The runlevels field is completely ignored.\n" \ "\n" \ " :\n" \ "\n" \ " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ " once, restart, ctrlaltdel, and shutdown.\n" \ "\n" \ " The available actions can be classified into two groups: actions\n" \ " that are run only once, and actions that are re-run when the specified\n" \ " process exits.\n" \ "\n" \ " Run only-once actions:\n" \ "\n" \ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ " wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ " init is told to reboot. Unmounting filesystems and disabling swap\n" \ " is a very good here.\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ " 'respawn' actions are run after the 'once' actions. When a process\n" \ " started with a 'respawn' action exits, init automatically restarts\n" \ " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ " respawning out of control. The 'askfirst' actions acts just like\n" \ " respawn, except that before running the specified process it\n" \ " displays the line \"Please press Enter to activate this console.\"\n" \ " and then waits for the user to press enter before starting the\n" \ " specified process.\n" \ "\n" \ " Unrecognized actions (like initdefault) will cause init to emit an\n" \ " error message, and then go along with its business. All actions are\n" \ " run in the order they appear in /etc/inittab.\n" \ "\n" \ " :\n" \ "\n" \ " Specifies the process to be executed and its command line.\n" \ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ " # This is run first except when booting in single-user mode\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ " # /bin/sh invocations on selected ttys\n" \ " #\n" \ " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ " ::askfirst:-/bin/sh\n" \ " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ " tty2::askfirst:-/bin/sh\n" \ " tty3::askfirst:-/bin/sh\n" \ " tty4::askfirst:-/bin/sh\n" \ " \n" \ " # /sbin/getty invocations for selected ttys\n" \ " #\n" \ " tty4::respawn:/sbin/getty 38400 tty4\n" \ " tty5::respawn:/sbin/getty 38400 tty5\n" \ " \n" \ " \n" \ " # Example of how to put a getty on a serial line (for a terminal)\n" \ " #\n" \ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ " # Example how to put a getty on a modem line\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ " ::restart:/sbin/init\n" \ " \n" \ " # Stuff to do before rebooting\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" \ #define nuke_trivial_usage \ "DIR..." \ #define nuke_full_usage "\n\n" \ "Remove DIRs" \ #define resume_trivial_usage \ "BLOCKDEV [OFFSET]" \ #define resume_full_usage "\n" \ "\n""Restore system state from 'suspend-to-disk' data in BLOCKDEV" \ #define busybox_trivial_usage NOUSAGE_STR \ #define busybox_full_usage "" \ #define unit_trivial_usage \ "" \ #define unit_full_usage "\n\n" \ "Run the unit-test suite" \ #define parse_trivial_usage \ "[-x] [-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..." \ #define parse_full_usage "\n\n" \ " -x Suppress output (for benchmarking)" \ #define add_shell_trivial_usage \ "SHELL..." \ #define add_shell_full_usage "\n\n" \ "Add SHELLs to /etc/shells" \ #define remove_shell_trivial_usage \ "SHELL..." \ #define remove_shell_full_usage "\n\n" \ "Remove SHELLs from /etc/shells" \ #define addgroup_trivial_usage \ "[-g GID] [-S] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP" \ #define addgroup_full_usage "\n\n" \ "Add a group" IF_FEATURE_ADDUSER_TO_GROUP(" or add a user to a group") "\n" \ "\n -g GID Group id" \ "\n -S Create a system group" \ #define adduser_trivial_usage \ "[OPTIONS] USER [GROUP]" \ #define adduser_full_usage "\n\n" \ "Create new user, or add USER to GROUP\n" \ "\n -h DIR Home directory" \ "\n -g GECOS GECOS field" \ "\n -s SHELL Login shell" \ "\n -G GRP Group" \ "\n -S Create a system user" \ "\n -D Don't assign a password" \ "\n -H Don't create home directory" \ "\n -u UID User id" \ "\n -k SKEL Skeleton directory (/etc/skel)" \ #define chpasswd_trivial_usage \ "[-me] [-c ALG] [-R DIR]" \ #define chpasswd_full_usage "\n\n" \ "Read user:password from stdin and update /etc/passwd\n" \ "\n -e Supplied passwords are in encrypted form" \ "\n -m Encrypt using md5, not des" \ "\n -c ALG "CRYPT_METHODS_HELP_STR \ "\n -R DIR Directory to chroot into" \ #define cryptpw_trivial_usage \ "[-P FD] [-m TYPE] [-S SALT] [PASSWORD] [SALT]" \ #define cryptpw_full_usage "\n\n" \ "Print crypt(3) hashed PASSWORD\n" \ "\n -P N Read password from fd N" \ "\n -m TYPE "CRYPT_METHODS_HELP_STR \ "\n -S SALT" \ #define deluser_trivial_usage \ IF_LONG_OPTS("[--remove-home] ") "USER" \ #define deluser_full_usage "\n\n" \ "Delete USER from the system" \ #define delgroup_trivial_usage \ IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP" \ #define delgroup_full_usage "\n\n" \ "Delete group GROUP from the system" \ IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP") \ #define getty_trivial_usage \ "[OPTIONS] BAUD_RATE[,BAUD_RATE]... TTY [TERMTYPE]" \ #define getty_full_usage "\n\n" \ "Open TTY, prompt for login name, then invoke /bin/login\n" \ "\n -h Enable hardware RTS/CTS flow control" \ "\n -L Set CLOCAL (ignore Carrier Detect state)" \ "\n -m Get baud rate from modem's CONNECT status message" \ "\n -n Don't prompt for login name" \ "\n -w Wait for CR or LF before sending /etc/issue" \ "\n -i Don't display /etc/issue" \ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \ "\n -l LOGIN Invoke LOGIN instead of /bin/login" \ "\n -t SEC Terminate after SEC if no login name is read" \ "\n -I INITSTR Send INITSTR before anything else" \ "\n -H HOST Log HOST into the utmp file as the hostname" \ "\n" \ "\nBAUD_RATE of 0 leaves it unchanged" \ #define login_trivial_usage \ "[-p] [-h HOST] [[-f] USER]" \ #define login_full_usage "\n\n" \ "Begin a new session on the system\n" \ "\n -f Don't authenticate (user already authenticated)" \ "\n -h HOST Host user came from (for network logins)" \ "\n -p Preserve environment" \ "\n" \ "\n$LOGIN_TIMEOUT Seconds (default 60, 0 - disable)" \ IF_LOGIN_SCRIPTS( \ "\n$LOGIN_PRE_SUID_SCRIPT Execute before user ID change" \ ) \ #define passwd_trivial_usage \ "[-a ALG] [-dlu] [USER]" \ #define passwd_full_usage "\n\n" \ "Change USER's password (default: current user)" \ "\n" \ "\n -a ALG "CRYPT_METHODS_HELP_STR \ "\n -d Set password to ''" \ "\n -l Lock (disable) account" \ "\n -u Unlock (enable) account" \ #define su_trivial_usage \ "[-lmp] [-s SH] [-] [USER [FILE ARGS | -c 'CMD' [ARG0 ARGS]]]" \ #define su_full_usage "\n\n" \ "Run shell under USER (by default, root)\n" \ "\n -,-l Clear environment, go to home dir, run shell as login shell" \ "\n -p,-m Do not set new $HOME, $SHELL, $USER, $LOGNAME" \ "\n -c CMD Command to pass to 'sh -c'" \ "\n -s SH Shell to use instead of user's default" \ #define sulogin_trivial_usage \ "[-t N] [TTY]" \ #define sulogin_full_usage "\n\n" \ "Single user login\n" \ "\n -p Start a login shell" \ "\n -t SEC Timeout" \ #define vlock_trivial_usage \ "[-a]" \ #define vlock_full_usage "\n\n" \ "Lock a virtual terminal. A password is required to unlock.\n" \ "\n -a Lock all VTs" \ #define makemime_trivial_usage \ "[OPTIONS] [FILE]..." \ #define makemime_full_usage "\n\n" \ "Create multipart MIME-encoded message from FILEs\n" \ "\n -o FILE Output. Default: stdout" \ "\n -a HDR Add header(s). Examples:" \ "\n \"From: user@host.org\", \"Date: `date -R`\"" \ "\n -c CT Content type. Default: application/octet-stream" \ "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \ "\n" \ "\nOther options are silently ignored" \ #define popmaildir_trivial_usage \ "[OPTIONS] MAILDIR [CONN_HELPER ARGS]" \ #define popmaildir_full_usage "\n\n" \ "Fetch content of remote mailbox to local maildir\n" \ "\n -s Skip authorization" \ "\n -T Get messages with TOP instead of RETR" \ "\n -k Keep retrieved messages on the server" \ "\n -t SEC Network timeout" \ IF_FEATURE_POPMAILDIR_DELIVERY( \ "\n -F 'PROG ARGS' Filter program (may be repeated)" \ "\n -M 'PROG ARGS' Delivery program" \ ) \ "\n" \ "\nFetch from plain POP3 server:" \ "\npopmaildir -k DIR nc pop3.server.com 110 . Can be empty string" \ "\n Default: -auUSER, or username of current UID" \ "\n -o OPTIONS Various options. -oi implied, others are ignored" \ "\n -i -oi synonym, implied and ignored" \ "\n" \ "\nBusybox specific options:" \ "\n -v Verbose" \ "\n -w SECS Network timeout" \ "\n -H 'PROG ARGS' Run connection helper. Examples:" \ "\n openssl s_client -quiet -tls1 -starttls smtp -connect smtp.gmail.com:25" \ "\n openssl s_client -quiet -tls1 -connect smtp.gmail.com:465" \ "\n $SMTP_ANTISPAM_DELAY: seconds to wait after helper connect" \ "\n -S HOST[:PORT] Server (default $SMTPHOST or 127.0.0.1)" \ "\n -amLOGIN Log in using AUTH LOGIN" \ "\n -amPLAIN or AUTH PLAIN" \ "\n (-amCRAM-MD5 not supported)" \ "\n -auUSER Username for AUTH" \ "\n -apPASS Password for AUTH" \ "\n" \ "\nIf no -a options are given, authentication is not done." \ "\nIf -amLOGIN is given but no -au/-ap, user/password is read from fd #4." \ "\nOther options are silently ignored; -oi is implied." \ IF_MAKEMIME( \ "\nUse makemime to create emails with attachments." \ ) \ #define adjtimex_trivial_usage \ "[-q] [-o OFS] [-f FREQ] [-p TCONST] [-t TICK]" \ #define adjtimex_full_usage "\n\n" \ "Read or set kernel time variables. See adjtimex(2)\n" \ "\n -q Quiet" \ "\n -o OFF Time offset, microseconds" \ "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \ "\n -t TICK Microseconds per tick, usually 10000" \ "\n (positive -t or -f values make clock run faster)" \ "\n -p TCONST" \ #define ascii_trivial_usage NOUSAGE_STR \ #define ascii_full_usage "" \ #define bbconfig_trivial_usage \ "" \ #define bbconfig_full_usage "\n\n" \ "Print the config file used by busybox build" \ #define bc_trivial_usage \ "[-sqlw] [FILE]..." \ #define bc_full_usage "\n" \ "\nArbitrary precision calculator" \ "\n" \ "\n -q Quiet" \ "\n -l Load standard library" \ "\n -s Be POSIX compatible" \ "\n -w Warn if extensions are used" \ "\n" \ "\n$BC_LINE_LENGTH changes output width" \ #define bc_example_usage \ "3 + 4.129\n" \ "1903 - 2893\n" \ "-129 * 213.28935\n" \ "12 / -1932\n" \ "12 % 12\n" \ "34 ^ 189\n" \ "scale = 13\n" \ "ibase = 2\n" \ "obase = A\n" \ #define dc_trivial_usage \ IF_FEATURE_DC_BIG("[-x] ")"[-eSCRIPT]... [-fFILE]... [FILE]..." \ #define dc_full_usage "\n" \ "\nTiny RPN calculator. Operations:" \ "\nArithmetic: + - * / % ^" \ IF_FEATURE_DC_BIG( \ "\n~ - divide with remainder" \ "\n| - modular exponentiation" \ "\nv - square root" \ ) \ "\np - print top of the stack without popping" \ "\nf - print entire stack" \ IF_FEATURE_DC_BIG( \ "\nk - pop the value and set precision" \ "\ni - pop the value and set input radix" \ ) \ "\no - pop the value and set output radix" \ "\nExamples: dc -e'2 2 + p' -> 4, dc -e'8 8 * 2 2 + / p' -> 16" \ #define dc_example_usage \ "$ dc -e'2 2 + p'\n" \ "4\n" \ "$ dc -e'8 8 \\* 2 2 + / p'\n" \ "16\n" \ "$ dc -e'0 1 & p'\n" \ "0\n" \ "$ dc -e'0 1 | p'\n" \ "1\n" \ "$ echo '72 9 / 8 * p' | dc\n" \ "64\n" \ #define beep_trivial_usage \ "-f FREQ -l LEN -d DELAY -r COUNT -n" \ #define beep_full_usage "\n\n" \ " -f Frequency in Hz" \ "\n -l Length in ms" \ "\n -d Delay in ms" \ "\n -r Repetitions" \ "\n -n Start new tone" \ #define chat_trivial_usage \ "EXPECT [SEND [EXPECT [SEND]]...]" \ #define chat_full_usage "\n\n" \ "Useful for interacting with a modem connected to stdin/stdout.\n" \ "A script consists of \"expect-send\" argument pairs.\n" \ "Example:\n" \ "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \ #define conspy_trivial_usage \ "[-vcsndfFQ] [-x COL] [-y LINE] [CONSOLE_NO]" \ #define conspy_full_usage "\n\n" \ "A text-mode VNC like program for Linux virtual consoles." \ "\nTo exit, quickly press ESC 3 times." \ "\n" \ "\n -v Don't send keystrokes to the console" \ "\n -c Create missing /dev/{tty,vcsa}N" \ "\n -s Open a SHELL session" \ "\n -n Black & white" \ "\n -d Dump console to stdout" \ "\n -f Follow cursor" \ "\n -F Assume console is on a framebuffer device" \ "\n -Q Disable exit on ESC-ESC-ESC" \ "\n -x COL Starting column" \ "\n -y LINE Starting line" \ #define crond_trivial_usage \ "[-fbS] [-l N] " IF_FEATURE_CROND_D("[-d N] ") "[-L LOGFILE] [-c DIR]" \ #define crond_full_usage "\n\n" \ " -f Foreground" \ "\n -b Background (default)" \ "\n -S Log to syslog (default)" \ "\n -l N Set log level. Most verbose 0, default 8" \ IF_FEATURE_CROND_D( \ "\n -d N Set log level, log to stderr" \ ) \ "\n -L FILE Log to FILE" \ "\n -c DIR Cron dir. Default:"CONFIG_FEATURE_CROND_DIR"/crontabs" \ #define crontab_trivial_usage \ "[-c DIR] [-u USER] [-ler]|[FILE]" \ #define crontab_full_usage "\n\n" \ " -c Crontab directory" \ "\n -u User" \ "\n -l List crontab" \ "\n -e Edit crontab" \ "\n -r Delete crontab" \ "\n FILE Replace crontab by FILE ('-': stdin)" \ #define devfsd_trivial_usage \ "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]") \ #define devfsd_full_usage "\n\n" \ "Manage devfs permissions and old device name symlinks\n" \ "\n mntpnt The mount point where devfs is mounted" \ "\n -v Print the protocol version numbers for devfsd" \ "\n and the kernel-side protocol version and exit" \ IF_DEVFSD_FG_NP( \ "\n -fg Run in foreground" \ "\n -np Exit after parsing the configuration file" \ "\n and processing synthetic REGISTER events," \ "\n don't poll for events" \ ) \ #define devmem_trivial_usage \ "ADDRESS [WIDTH [VALUE]]" \ #define devmem_full_usage "\n\n" \ "Read/write from physical address\n" \ "\n ADDRESS Address to act upon" \ "\n WIDTH Width (8/16/...)" \ "\n VALUE Data to be written" \ #define fbsplash_trivial_usage \ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]" \ #define fbsplash_full_usage "\n\n" \ " -s Image" \ "\n -c Hide cursor" \ "\n -d Framebuffer device (default /dev/fb0)" \ "\n -i Config file (var=value):" \ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \ "\n BAR_R,BAR_G,BAR_B,IMG_LEFT,IMG_TOP" \ "\n -f Control pipe (else exit after drawing image)" \ "\n commands: 'NN' (% for progress bar) or 'exit'" \ #define flash_eraseall_trivial_usage \ "[-jNq] MTD_DEVICE" \ #define flash_eraseall_full_usage "\n\n" \ "Erase an MTD device\n" \ "\n -j Format the device for jffs2" \ "\n -N Don't skip bad blocks" \ "\n -q Don't display progress messages" \ #define flash_lock_trivial_usage \ "MTD_DEVICE OFFSET SECTORS" \ #define flash_lock_full_usage "\n\n" \ "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \ "will be locked, regardless of the value of OFFSET" \ #define flash_unlock_trivial_usage \ "MTD_DEVICE" \ #define flash_unlock_full_usage "\n\n" \ "Unlock an MTD device" \ #define flashcp_trivial_usage \ "[-v] FILE MTD_DEVICE" \ #define flashcp_full_usage "\n\n" \ "Copy FILE to MTD device\n" \ "\n -v Verbose" \ #define hdparm_trivial_usage \ "[OPTIONS] [DEVICE]" \ #define hdparm_full_usage "\n\n" \ " -a Get/set fs readahead" \ "\n -A Set drive read-lookahead flag (0/1)" \ "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \ "\n -B Set Advanced Power Management setting (1-255)" \ "\n -c Get/set IDE 32-bit IO setting" \ "\n -C Check IDE power mode status" \ IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \ "\n -d Get/set using_dma flag") \ "\n -D Enable/disable drive defect-mgmt" \ "\n -f Flush buffer cache for device on exit" \ "\n -g Display drive geometry" \ "\n -h Display terse usage information" \ IF_FEATURE_HDPARM_GET_IDENTITY( \ "\n -i Display drive identification") \ IF_FEATURE_HDPARM_GET_IDENTITY( \ "\n -I Detailed/current information directly from drive") \ "\n -k Get/set keep_settings_over_reset flag (0/1)" \ "\n -K Set drive keep_features_over_reset flag (0/1)" \ "\n -L Set drive doorlock (0/1) (removable harddisks only)" \ "\n -m Get/set multiple sector count" \ "\n -n Get/set ignore-write-errors flag (0/1)" \ "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \ "\n -P Set drive prefetch count" \ "\n -Q Get/set DMA tagged-queuing depth (if supported)" \ "\n -r Get/set readonly flag (DANGEROUS to set)" \ IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ "\n -R Register an IDE interface (DANGEROUS)") \ "\n -S Set standby (spindown) timeout" \ "\n -t Perform device read timings" \ "\n -T Perform cache read timings" \ "\n -u Get/set unmaskirq flag (0/1)" \ IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ "\n -U Unregister an IDE interface (DANGEROUS)") \ "\n -v Defaults; same as -mcudkrag for IDE drives" \ "\n -V Display program version and exit immediately" \ IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ "\n -w Perform device reset (DANGEROUS)") \ "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \ IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \ "\n -X Set IDE xfer mode (DANGEROUS)" \ "\n -y Put IDE drive in standby mode" \ "\n -Y Put IDE drive to sleep" \ "\n -Z Disable Seagate auto-powersaving mode" \ "\n -z Reread partition table" \ #define hexedit_trivial_usage \ "FILE" \ #define hexedit_full_usage "\n\n" \ "Edit FILE in hexadecimal" \ #define i2cget_trivial_usage \ "[-fy] BUS CHIP-ADDRESS [DATA-ADDRESS [MODE]]" \ #define i2cget_full_usage "\n\n" \ "Read from I2C/SMBus chip registers" \ "\n" \ "\n I2CBUS I2C bus number" \ "\n ADDRESS 0x03-0x77" \ "\nMODE is:" \ "\n b Read byte data (default)" \ "\n w Read word data" \ "\n c Write byte/read byte" \ "\n Append p for SMBus PEC" \ "\n" \ "\n -f Force access" \ "\n -y Disable interactive mode" \ #define i2cset_trivial_usage \ "[-fy] [-m MASK] BUS CHIP-ADDRESS DATA-ADDRESS [VALUE] ... [MODE]" \ #define i2cset_full_usage "\n\n" \ "Set I2C registers" \ "\n" \ "\n I2CBUS I2C bus number" \ "\n ADDRESS 0x03-0x77" \ "\nMODE is:" \ "\n c Byte, no value" \ "\n b Byte data (default)" \ "\n w Word data" \ "\n i I2C block data" \ "\n s SMBus block data" \ "\n Append p for SMBus PEC" \ "\n" \ "\n -f Force access" \ "\n -y Disable interactive mode" \ "\n -r Read back and compare the result" \ "\n -m MASK Mask specifying which bits to write" \ #define i2cdump_trivial_usage \ "[-fy] [-r FIRST-LAST] BUS ADDR [MODE]" \ #define i2cdump_full_usage "\n\n" \ "Examine I2C registers" \ "\n" \ "\n I2CBUS I2C bus number" \ "\n ADDRESS 0x03-0x77" \ "\nMODE is:" \ "\n b Byte (default)" \ "\n w Word" \ "\n W Word on even register addresses" \ "\n i I2C block" \ "\n s SMBus block" \ "\n c Consecutive byte" \ "\n Append p for SMBus PEC" \ "\n" \ "\n -f Force access" \ "\n -y Disable interactive mode" \ "\n -r Limit the number of registers being accessed" \ #define i2cdetect_trivial_usage \ "-l | -F I2CBUS | [-ya] [-q|-r] I2CBUS [FIRST LAST]" \ #define i2cdetect_full_usage "\n\n" \ "Detect I2C chips" \ "\n" \ "\n -l List installed buses" \ "\n -F BUS# List functionalities on this bus" \ "\n -y Disable interactive mode" \ "\n -a Force scanning of non-regular addresses" \ "\n -q Use smbus quick write commands for probing (default)" \ "\n -r Use smbus read byte commands for probing" \ "\n FIRST and LAST limit probing range" \ #define i2ctransfer_trivial_usage \ "[-fay] I2CBUS { rLENGTH[@ADDR] | wLENGTH[@ADDR] DATA...}..." \ #define i2ctransfer_full_usage "\n\n" \ "Read/write I2C data in one transfer" \ "\n" \ "\n -f Force access to busy addresses" \ "\n -a Force access to non-regular addresses" \ "\n -y Disable interactive mode" \ #define inotifyd_trivial_usage \ "PROG FILE1[:MASK]..." \ #define inotifyd_full_usage "\n\n" \ "Run PROG on filesystem changes." \ "\nWhen a filesystem event matching MASK occurs on FILEn," \ "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \ "\nIf PROG is -, events are sent to stdout." \ "\nEvents:" \ "\n a File is accessed" \ "\n c File is modified" \ "\n e Metadata changed" \ "\n w Writable file is closed" \ "\n 0 Unwritable file is closed" \ "\n r File is opened" \ "\n D File is deleted" \ "\n M File is moved" \ "\n u Backing fs is unmounted" \ "\n o Event queue overflowed" \ "\n x File can't be watched anymore" \ "\nIf watching a directory:" \ "\n y Subfile is moved into dir" \ "\n m Subfile is moved out of dir" \ "\n n Subfile is created" \ "\n d Subfile is deleted" \ "\n" \ "\ninotifyd waits for PROG to exit." \ "\nWhen x event happens for all FILEs, inotifyd exits." \ #define less_trivial_usage \ "[-EF" IF_FEATURE_LESS_REGEXP("I")IF_FEATURE_LESS_FLAGS("Mm") \ "N" IF_FEATURE_LESS_TRUNCATE("S") IF_FEATURE_LESS_RAW("R") "h~] [FILE]..." \ #define less_full_usage "\n\n" \ "View FILE (or stdin) one screenful at a time\n" \ "\n -E Quit once the end of a file is reached" \ "\n -F Quit if entire file fits on first screen" \ IF_FEATURE_LESS_REGEXP( \ "\n -I Ignore case in all searches" \ ) \ IF_FEATURE_LESS_FLAGS( \ "\n -M,-m Display status line with line numbers" \ "\n and percentage through the file" \ ) \ "\n -N Prefix line number to each line" \ IF_FEATURE_LESS_TRUNCATE( \ "\n -S Truncate long lines" \ ) \ IF_FEATURE_LESS_RAW( \ "\n -R Remove color escape codes in input" \ ) \ "\n -~ Suppress ~s displayed past EOF" \ #define lsscsi_trivial_usage NOUSAGE_STR \ #define lsscsi_full_usage "" \ #if ENABLE_FEATURE_MAKEDEVS_LEAF \ #define makedevs_trivial_usage \ "NAME TYPE MAJOR MINOR FIRST LAST [s]" \ #define makedevs_full_usage "\n\n" \ "Create a range of block or character special files" \ "\n" \ "\nTYPE is:" \ "\n b Block device" \ "\n c Character device" \ "\n f FIFO, MAJOR and MINOR are ignored" \ "\n" \ "\nFIRST..LAST specify numbers appended to NAME." \ "\nIf 's' is the last argument, the base device is created as well." \ "\n" \ "\nExamples:" \ "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \ "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" \ #define makedevs_example_usage \ "# makedevs /dev/ttyS c 4 66 2 63\n" \ "[creates ttyS2-ttyS63]\n" \ "# makedevs /dev/hda b 3 0 0 8 s\n" \ "[creates hda,hda1-hda8]\n" \ #endif \ #if ENABLE_FEATURE_MAKEDEVS_TABLE \ #define makedevs_trivial_usage \ "[-d device_table] rootdir" \ #define makedevs_full_usage "\n\n" \ "Create a range of special files as specified in a device table.\n" \ "Device table entries take the form of:\n" \ " \n" \ "Where name is the file name, type can be one of:\n" \ " f Regular file\n" \ " d Directory\n" \ " c Character device\n" \ " b Block device\n" \ " p Fifo (named pipe)\n" \ "uid is the user id for the target file, gid is the group id for the\n" \ "target file. The rest of the entries (major, minor, etc) apply to\n" \ "to device special files. A '-' may be used for blank entries." \ #define makedevs_example_usage \ "For example:\n" \ " \n" \ "/dev d 755 0 0 - - - - -\n" \ "/dev/console c 666 0 0 5 1 - - -\n" \ "/dev/null c 666 0 0 1 3 0 0 -\n" \ "/dev/zero c 666 0 0 1 5 0 0 -\n" \ "/dev/hda b 640 0 0 3 0 0 0 -\n" \ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ "Will Produce:\n" \ "/dev\n" \ "/dev/console\n" \ "/dev/null\n" \ "/dev/zero\n" \ "/dev/hda\n" \ "/dev/hda[0-15]\n" \ #endif \ #define man_trivial_usage \ "[-aw] [SECTION] MANPAGE[.SECTION]..." \ #define man_full_usage "\n\n" \ "Display manual page\n" \ "\n -a Display all pages" \ "\n -w Show page locations" \ "\n" \ "\n$COLUMNS overrides output width" \ #define microcom_trivial_usage \ "[-d DELAY_MS] [-t TIMEOUT_MS ] [-s SPEED] [-X] TTY" \ #define microcom_full_usage "\n\n" \ "Copy bytes from stdin to TTY and from TTY to stdout\n" \ "\n -d DELAY Wait up to DELAY ms for TTY output before sending" \ "\n every next byte to it" \ "\n -t TIMEOUT Exit if both stdin and TTY are silent for TIMEOUT ms" \ "\n -s SPEED Set serial line to SPEED" \ "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \ #define mim_trivial_usage \ "[-f FILE] [SHELL_OPTIONS] [TARGET] ..." \ #define mim_full_usage "\n\n" \ "Run a script from a Makefile-like specification file\n" \ "\n -f FILE Spec file (default Mimfile)" \ #define mt_trivial_usage \ "[-f DEVICE] OPCODE VALUE" \ #define mt_full_usage "\n\n" \ "Control magnetic tape drive operation\n" \ "\n" \ "Opcodes:\n" \ "\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ "setpart tell unload unlock weof wset" \ #define nandwrite_trivial_usage \ "[-np] [-s ADDR] MTD_DEVICE [FILE]" \ #define nandwrite_full_usage "\n\n" \ "Write to MTD_DEVICE\n" \ "\n -n Write without ecc" \ "\n -p Pad to page size" \ "\n -s ADDR Start address" \ #define nanddump_trivial_usage \ "[-no]" IF_LONG_OPTS(" [--bb padbad|skipbad]") " [-s ADDR] [-l LEN] [-f FILE] MTD_DEVICE" \ #define nanddump_full_usage "\n\n" \ "Dump MTD_DEVICE\n" \ "\n -n Read without ecc" \ "\n -o Dump oob data" \ "\n -s ADDR Start address" \ "\n -l LEN Length" \ "\n -f FILE Dump to file ('-' for stdout)" \ IF_LONG_OPTS( \ "\n --bb METHOD" \ "\n skipbad: skip bad blocks" \ "\n padbad: substitute bad blocks by 0xff (default)" \ ) \ #define partprobe_trivial_usage \ "DEVICE..." \ #define partprobe_full_usage "\n\n" \ "Ask kernel to rescan partition table" \ #define raidautorun_trivial_usage \ "DEVICE" \ #define raidautorun_full_usage "\n\n" \ "Tell the kernel to automatically search and start RAID arrays" \ #define raidautorun_example_usage \ "$ raidautorun /dev/md0" \ #define readahead_trivial_usage \ "[FILE]..." \ #define readahead_full_usage "\n\n" \ "Preload FILEs to RAM" \ #define rfkill_trivial_usage \ "COMMAND [INDEX|TYPE]" \ #define rfkill_full_usage "\n\n" \ "Enable/disable wireless devices\n" \ "\nCommands:" \ "\n list [INDEX|TYPE] List current state" \ "\n block INDEX|TYPE Disable device" \ "\n unblock INDEX|TYPE Enable device" \ "\n" \ "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \ "\n wimax, wwan, gps, fm" \ #define runlevel_trivial_usage \ "[FILE]" \ #define runlevel_full_usage "\n\n" \ "Find the current and previous system runlevel\n" \ "\n" \ "If no utmp FILE exists or if no runlevel record can be found,\n" \ "print \"unknown\"" \ #define runlevel_example_usage \ "$ runlevel /var/run/utmp\n" \ "N 2" \ #define rx_trivial_usage \ "FILE" \ #define rx_full_usage "\n\n" \ "Receive a file using the xmodem protocol" \ #define rx_example_usage \ "$ rx /tmp/foo\n" \ #define seedrng_trivial_usage \ "[-d DIR] [-n]" \ #define seedrng_full_usage "\n\n" \ "Seed the kernel RNG from seed files" \ "\n" \ "\n -d DIR Use seed files in DIR (default: /var/lib/seedrng)" \ "\n -n Do not credit randomness, even if creditable" \ #define setfattr_trivial_usage \ "[-h] -n|-x ATTR [-v VALUE] FILE..." \ #define setfattr_full_usage "\n\n" \ "Set extended attributes" \ "\n" \ "\n -h Do not follow symlinks" \ "\n -x ATTR Remove attribute ATTR" \ "\n -n ATTR Set attribute ATTR to VALUE" \ "\n -v VALUE (default: empty)" \ #define setserial_trivial_usage \ "[-abGvz] { DEVICE [PARAMETER [ARG]]... | -g DEVICE... }" \ #define setserial_full_usage "\n\n" \ "Print or set serial port parameters" \ "\n" \ "\n"" -a Print all" \ "\n"" -b Print summary" \ "\n"" -G Print as setserial PARAMETERs" \ "\n"" -v Verbose" \ "\n"" -z Zero out serial flags before setting" \ "\n"" -g All args are device names" \ "\n" \ "\n""PARAMETERs: (* = takes ARG, ^ = can be turned off by preceding ^)" \ "\n"" *port, *irq, *divisor, *uart, *baud_base, *close_delay, *closing_wait," \ "\n"" ^fourport, ^auto_irq, ^skip_test, ^sak, ^session_lockout, ^pgrp_lockout," \ "\n"" ^callout_nohup, ^split_termios, ^hup_notify, ^low_latency, autoconfig," \ "\n"" spd_normal, spd_hi, spd_vhi, spd_shi, spd_warp, spd_cust" \ "\n""ARG for uart:" \ "\n"" unknown, 8250, 16450, 16550, 16550A, Cirrus, 16650, 16650V2, 16750," \ "\n"" 16950, 16954, 16654, 16850, RSA, NS16550A, XSCALE, RM9000, OCTEON, AR7," \ "\n"" U6_16550A" \ #define strings_trivial_usage \ "[-fo] [-t o|d|x] [-n LEN] [FILE]..." \ #define strings_full_usage "\n\n" \ "Display printable strings in a binary file\n" \ "\n -f Precede strings with filenames" \ "\n -o Precede strings with octal offsets" \ "\n -t o|d|x Precede strings with offsets in base 8/10/16" \ "\n -n LEN At least LEN characters form a string (default 4)" \ #define time_trivial_usage \ "[-vpa] [-o FILE] PROG ARGS" \ #define time_full_usage "\n\n" \ "Run PROG, display resource usage when it exits\n" \ "\n -v Verbose" \ "\n -p POSIX output format" \ "\n -f FMT Custom format" \ "\n -o FILE Write result to FILE" \ "\n -a Append (else overwrite)" \ #define tree_trivial_usage NOUSAGE_STR \ #define tree_full_usage "" \ #define ts_trivial_usage \ "[-is] [STRFTIME]" \ #define ts_full_usage "\n\n" \ "Pipe stdin to stdout, add timestamp to each line\n" \ "\n -s Time since start" \ "\n -i Time since previous line" \ #define ttysize_trivial_usage \ "[w] [h]" \ #define ttysize_full_usage "\n\n" \ "Print dimensions of stdin tty, or 80x24" \ #define ubiattach_trivial_usage \ "-m MTD_NUM [-d UBI_NUM] [-O VID_HDR_OFF] UBI_CTRL_DEV" \ #define ubiattach_full_usage "\n\n" \ "Attach MTD device to UBI\n" \ "\n -m MTD_NUM MTD device number to attach" \ "\n -d UBI_NUM UBI device number to assign" \ "\n -O VID_HDR_OFF VID header offset" \ #define ubidetach_trivial_usage \ "-d UBI_NUM UBI_CTRL_DEV" \ #define ubidetach_full_usage "\n\n" \ "Detach MTD device from UBI\n" \ "\n -d UBI_NUM UBI device number" \ #define ubimkvol_trivial_usage \ "-N NAME [-s SIZE | -m] UBI_DEVICE" \ #define ubimkvol_full_usage "\n\n" \ "Create UBI volume\n" \ "\n -a ALIGNMENT Volume alignment (default 1)" \ "\n -m Set volume size to maximum available" \ "\n -n VOLID Volume ID. If not specified," \ "\n assigned automatically" \ "\n -N NAME Volume name" \ "\n -s SIZE Size in bytes" \ "\n -t TYPE Volume type (static|dynamic)" \ #define ubirmvol_trivial_usage \ "-n VOLID | -N VOLNAME UBI_DEVICE" \ #define ubirmvol_full_usage "\n\n" \ "Remove UBI volume\n" \ "\n -n VOLID Volume ID" \ "\n -N VOLNAME Volume name" \ #define ubirsvol_trivial_usage \ "-n VOLID -s SIZE UBI_DEVICE" \ #define ubirsvol_full_usage "\n\n" \ "Resize UBI volume\n" \ "\n -n VOLID Volume ID" \ "\n -s SIZE Size in bytes" \ #define ubiupdatevol_trivial_usage \ "-t UBI_DEVICE | [-s SIZE] UBI_DEVICE IMG_FILE" \ #define ubiupdatevol_full_usage "\n\n" \ "Update UBI volume\n" \ "\n -t Truncate to zero size" \ "\n -s SIZE Size in bytes to resize to" \ #define ubirename_trivial_usage \ "UBI_DEVICE OLD_VOLNAME NEW_VOLNAME [OLD2 NEW2]..." \ #define ubirename_full_usage "\n\n" \ "Rename UBI volumes on UBI_DEVICE" \ #define volname_trivial_usage \ "[DEVICE]" \ #define volname_full_usage "\n\n" \ "Show CD volume name of the DEVICE (default /dev/cdrom)" \ #define watchdog_trivial_usage \ "[-t N[ms]] [-T N[ms]] [-F] DEV" \ #define watchdog_full_usage "\n\n" \ "Periodically write to watchdog device DEV\n" \ "\n -T N Reboot after N seconds if not reset (default 60)" \ "\n -t N Reset every N seconds (default 30)" \ "\n -F Run in foreground" \ "\n" \ "\nUse 500ms to specify period in milliseconds" \ #if !ENABLE_MODPROBE_SMALL \ #define depmod_trivial_usage "[-n] [-b BASE] [VERSION] [MODFILES]..." \ #define depmod_full_usage "\n\n" \ "Generate modules.dep, alias, and symbols files" \ "\n" \ "\n -b BASE Use BASE/lib/modules/VERSION" \ "\n -n Dry run: print files to stdout" \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define insmod_trivial_usage \ IF_FEATURE_2_4_MODULES("[-fkvqLx] MODULE") \ IF_NOT_FEATURE_2_4_MODULES("FILE") \ IF_FEATURE_CMDLINE_MODULE_OPTIONS(" [SYMBOL=VALUE]...") \ #define insmod_full_usage "\n\n" \ "Load kernel module" \ IF_FEATURE_2_4_MODULES( "\n" \ "\n -f Force module to load into the wrong kernel version" \ "\n -k Make module autoclean-able" \ "\n -v Verbose" \ "\n -q Quiet" \ "\n -L Lock: prevent simultaneous loads" \ IF_FEATURE_INSMOD_LOAD_MAP( \ "\n -m Output load map to stdout" \ ) \ "\n -x Don't export externs" \ ) \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define lsmod_trivial_usage \ "" \ #define lsmod_full_usage "\n\n" \ "List loaded kernel modules" \ #endif \ #define modinfo_trivial_usage \ "[-adlpn0] [-F keyword] MODULE" \ #define modinfo_full_usage "\n\n" \ " -a Shortcut for '-F author'" \ "\n -d Shortcut for '-F description'" \ "\n -l Shortcut for '-F license'" \ "\n -p Shortcut for '-F parm'" \ "\n -F keyword Keyword to look for" \ "\n -0 NUL terminated output" \ #define modinfo_example_usage \ "$ modinfo -F vermagic loop\n" \ #if ENABLE_MODPROBE_SMALL \ #define lsmod_trivial_usage \ "" \ #define lsmod_full_usage "\n\n" \ "List loaded kernel modules" \ #endif \ #if ENABLE_MODPROBE_SMALL \ #define depmod_trivial_usage "[-n]" \ #define depmod_full_usage "\n\n" \ "Generate modules.dep.bb" \ "\n" \ "\n -n Dry run: print file to stdout" \ #define insmod_trivial_usage \ "FILE" IF_FEATURE_CMDLINE_MODULE_OPTIONS(" [SYMBOL=VALUE]...") \ #define insmod_full_usage "\n\n" \ "Load kernel module" \ #define rmmod_trivial_usage \ "MODULE..." \ #define rmmod_full_usage "\n\n" \ "Unload kernel modules" \ #define modprobe_trivial_usage \ "[-rq] MODULE" IF_FEATURE_CMDLINE_MODULE_OPTIONS(" [SYMBOL=VALUE]...") \ #define modprobe_full_usage "\n\n" \ " -r Remove MODULE" \ "\n -q Quiet" \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ "pass each module it loads.\n" \ "\n" \ "The configuration file is searched (in this order):\n" \ "\n" \ " /etc/modprobe.conf (2.6 only)\n" \ " /etc/modules.conf\n" \ " /etc/conf.modules (deprecated)\n" \ "\n" \ "They all have the same syntax (see below). If none is present, it is\n" \ "_not_ an error; each loaded module is then expected to load without\n" \ "options. Once a file is found, the others are tested for.\n" \ "\n" \ "/etc/modules.conf entry format:\n" \ "\n" \ " alias \n" \ " Makes it possible to modprobe alias_name, when there is no such module.\n" \ " It makes sense if your mod_name is long, or you want a more representative\n" \ " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ " This makes it also possible to use a different set of options (below) for\n" \ " the module and the alias.\n" \ " A module can be aliased more than once.\n" \ "\n" \ " options \n" \ " When loading module mod_name (or the module aliased by alias_name), pass\n" \ " the \"symbol=value\" pairs as option to that module.\n" \ "\n" \ "Sample /etc/modules.conf file:\n" \ "\n" \ " options tulip irq=3\n" \ " alias tulip tulip2\n" \ " options tulip2 irq=4 io=0x308\n" \ "\n" \ "Other functionality offered by 'classic' modprobe is not available in\n" \ "this implementation.\n" \ "\n" \ "If module options are present both in the config file, and on the command line,\n" \ "then the options from the command line will be passed to the module _after_\n" \ "the options from the config file. That way, you can have defaults in the config\n" \ "file, and override them for a specific usage from the command line.\n" \ #define modprobe_example_usage \ "(with the above /etc/modules.conf):\n\n" \ "$ modprobe tulip\n" \ " will load the module 'tulip' with default option 'irq=3'\n\n" \ "$ modprobe tulip irq=5\n" \ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ "$ modprobe tulip2\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ " which are the default for alias 'tulip2'\n\n" \ "$ modprobe tulip2 irq=8\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ " from the command line\n\n" \ "$ modprobe tulip2 irq=2 io=0x210\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ " from the command line\n" \ #define modprobe_trivial_usage \ "[-alrqvsD" IF_FEATURE_MODPROBE_BLACKLIST("b") "]" \ " MODULE" IF_FEATURE_CMDLINE_MODULE_OPTIONS(" [SYMBOL=VALUE]...") \ #define modprobe_full_usage "\n\n" \ " -a Load multiple MODULEs" \ "\n -l List (MODULE is a pattern)" \ "\n -r Remove MODULE (stacks) or do autoclean" \ "\n -q Quiet" \ "\n -v Verbose" \ "\n -s Log to syslog" \ "\n -D Show dependencies" \ IF_FEATURE_MODPROBE_BLACKLIST( \ "\n -b Apply blacklist to module names too" \ ) \ #endif /* !ENABLE_MODPROBE_SMALL */ \ #if !ENABLE_MODPROBE_SMALL \ #define rmmod_trivial_usage \ "[-wfa] [MODULE]..." \ #define rmmod_full_usage "\n\n" \ "Unload kernel modules\n" \ "\n -w Wait until the module is no longer used" \ "\n -f Force unload" \ "\n -a Remove all unused modules (recursively)" \ #define rmmod_example_usage \ "$ rmmod tulip\n" \ #endif \ #define arp_trivial_usage \ "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \ "\n[-v] [-i IF] -d HOSTNAME [pub]" \ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \ "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub" \ #define arp_full_usage "\n\n" \ "Manipulate ARP cache\n" \ "\n -a Display (all) hosts" \ "\n -d Delete ARP entry" \ "\n -s Set new entry" \ "\n -v Verbose" \ "\n -n Don't resolve names" \ "\n -i IF Network interface" \ "\n -D Read HWADDR from IFACE" \ "\n -A,-p AF Protocol family" \ "\n -H HWTYPE Hardware address type" \ #define arping_trivial_usage \ "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP" \ #define arping_full_usage "\n\n" \ "Send ARP requests/replies\n" \ "\n -f Quit on first ARP reply" \ "\n -q Quiet" \ "\n -b Keep broadcasting, don't go unicast" \ "\n -D Exit with 1 if DST_IP replies" \ "\n -U Unsolicited ARP mode, update your neighbors" \ "\n -A ARP answer mode, update your neighbors" \ "\n -c N Stop after sending N ARP requests" \ "\n -w TIMEOUT Seconds to wait for ARP reply" \ "\n -I IFACE Interface to use (default eth0)" \ "\n -s SRC_IP Sender IP address" \ "\n DST_IP Target IP address" \ #define brctl_trivial_usage \ "COMMAND [BRIDGE [ARGS]]" \ #define brctl_full_usage "\n\n" \ "Manage ethernet bridges" \ "\nCommands:" \ IF_FEATURE_BRCTL_SHOW( \ "\n show [BRIDGE]... Show bridges" \ ) \ "\n addbr BRIDGE Create BRIDGE" \ "\n delbr BRIDGE Delete BRIDGE" \ "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \ "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \ IF_FEATURE_BRCTL_FANCY( \ "\n showmacs BRIDGE List MAC addresses" \ "\n showstp BRIDGE Show STP info" \ "\n stp BRIDGE 1/yes/on|0/no/off Set STP on/off" \ "\n setageing BRIDGE SECONDS Set ageing time" \ "\n setfd BRIDGE SECONDS Set bridge forward delay" \ "\n sethello BRIDGE SECONDS Set hello time" \ "\n setmaxage BRIDGE SECONDS Set max message age" \ "\n setbridgeprio BRIDGE PRIO Set bridge priority" \ "\n setportprio BRIDGE IFACE PRIO Set port priority" \ "\n setpathcost BRIDGE IFACE COST Set path cost" \ ) \ #define dnsd_trivial_usage \ "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]" \ #define dnsd_full_usage "\n\n" \ "Small static DNS server daemon\n" \ "\n -c FILE Config file" \ "\n -t SEC TTL" \ "\n -p PORT Listen on PORT" \ "\n -i ADDR Listen on ADDR" \ "\n -d Daemonize" \ "\n -v Verbose" \ "\n -s Send successful replies only. Use this if you want" \ "\n to use /etc/resolv.conf with two nameserver lines:" \ "\n nameserver DNSD_SERVER" \ "\n nameserver NORMAL_DNS_SERVER" \ #define ether_wake_trivial_usage \ "[-b] [-i IFACE] [-p aa:bb:cc:dd[:ee:ff]/a.b.c.d] MAC" \ #define ether_wake_full_usage "\n\n" \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ "a hostname with a known 'ethers' entry.\n" \ "\n -b Broadcast the packet" \ "\n -i IFACE Interface to use (default eth0)" \ "\n -p PASSWORD Append four or six byte PASSWORD to the packet" \ #define ftpd_trivial_usage \ "[-wvS]"IF_FEATURE_FTPD_AUTHENTICATION(" [-a USER]")" [-t SEC] [-T SEC] [DIR]" \ #define ftpd_full_usage "\n\n" \ IF_NOT_FEATURE_FTPD_AUTHENTICATION( \ "Anonymous FTP server. Client access occurs under ftpd's UID.\n" \ ) \ IF_FEATURE_FTPD_AUTHENTICATION( \ "FTP server. " \ ) \ "Chroots to DIR, if this fails (run by non-root), cds to it.\n" \ "It is an inetd service, inetd.conf line:\n" \ " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \ "Can be run from tcpsvd:\n" \ " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve" \ "\n" \ "\n -w Allow upload" \ IF_FEATURE_FTPD_AUTHENTICATION( \ "\n -A No login required, client access occurs under ftpd's UID" \ "\n -a USER Enable 'anonymous' login and map it to USER" \ ) \ "\n -v Log errors to stderr. -vv: verbose log" \ "\n -S Log errors to syslog. -SS: verbose log" \ "\n -t,-T N Idle and absolute timeout" \ #define ftpget_trivial_usage \ "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE" \ #define ftpget_full_usage "\n\n" \ "Download a file via FTP\n" \ "\n -c Continue previous transfer" \ "\n -v Verbose" \ "\n -u USER Username" \ "\n -p PASS Password" \ "\n -P PORT" \ #define ftpput_trivial_usage \ "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE" \ #define ftpput_full_usage "\n\n" \ "Upload a file to a FTP server\n" \ "\n -v Verbose" \ "\n -u USER Username" \ "\n -p PASS Password" \ "\n -P PORT" \ #define hostname_trivial_usage \ "[-sidf] [HOSTNAME | -F FILE]" \ #define hostname_full_usage "\n\n" \ "Show or set hostname or DNS domain name\n" \ "\n -s Short" \ "\n -i Addresses for the hostname" \ "\n -d DNS domain name" \ "\n -f Fully qualified domain name" \ "\n -F FILE Use FILE's content as hostname" \ #define hostname_example_usage \ "$ hostname\n" \ "sage\n" \ #define dnsdomainname_trivial_usage NOUSAGE_STR \ #define dnsdomainname_full_usage "" \ #define httpd_trivial_usage \ "[-ifv[v]]" \ " [-c CONFFILE]" \ " [-p [IP:]PORT]" \ IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \ IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \ " [-h HOME]\n" \ "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING" \ #define httpd_full_usage "\n\n" \ "Listen for incoming HTTP requests\n" \ "\n -i Inetd mode" \ "\n -f Run in foreground" \ "\n -v[v] Verbose" \ "\n -p [IP:]PORT Bind to IP:PORT (default *:"STR(CONFIG_FEATURE_HTTPD_PORT_DEFAULT)")" \ IF_FEATURE_HTTPD_SETUID( \ "\n -u USER[:GRP] Set uid/gid after binding to port") \ IF_FEATURE_HTTPD_BASIC_AUTH( \ "\n -r REALM Authentication Realm for Basic Authentication") \ "\n -h HOME Home directory (default .)" \ "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \ IF_FEATURE_HTTPD_AUTH_MD5( \ "\n -m STRING MD5 crypt STRING") \ "\n -e STRING HTML encode STRING" \ "\n -d STRING URL decode STRING" \ #define ifconfig_trivial_usage \ IF_FEATURE_IFCONFIG_STATUS("[-a]") " [IFACE] [ADDRESS]" \ #define ifconfig_full_usage "\n\n" \ "Configure a network interface\n" \ "\n" \ IF_FEATURE_IPV6( \ " [add ADDRESS[/PREFIXLEN]]\n") \ IF_FEATURE_IPV6( \ " [del ADDRESS[/PREFIXLEN]]\n") \ " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \ " [netmask ADDRESS] [dstaddr ADDRESS]\n" \ IF_FEATURE_IFCONFIG_SLIP( \ " [outfill NN] [keepalive NN]\n") \ " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \ IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ " [mem_start NN] [io_addr NN] [irq NN]\n") \ " [up|down] ..." \ #define ifenslave_trivial_usage \ "[-cdf] MASTER_IFACE SLAVE_IFACE..." \ #define ifenslave_full_usage "\n\n" \ "Configure network interfaces for parallel routing\n" \ "\n -c Change active slave" \ "\n -d Remove slave interface from bonding device" \ "\n -f Force, even if interface is not Ethernet" \ #define ifenslave_example_usage \ "To create a bond device, simply follow these three steps:\n" \ "- ensure that the required drivers are properly loaded:\n" \ " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \ "- assign an IP address to the bond device:\n" \ " # ifconfig bond0 netmask broadcast \n" \ "- attach all the interfaces you need to the bond device:\n" \ " # ifenslave bond0 eth0 eth1 eth2\n" \ " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \ " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \ " To detach a dead interface without setting the bond device down:\n" \ " # ifenslave -d bond0 eth1\n\n" \ " To set the bond device down and automatically release all the slaves:\n" \ " # ifconfig bond0 down\n\n" \ " To change active slave:\n" \ " # ifenslave -c bond0 eth0\n" \ #define ifplugd_trivial_usage \ "[OPTIONS]" \ #define ifplugd_full_usage "\n\n" \ "Network interface plug detection daemon\n" \ "\n -n Run in foreground" \ "\n -s Don't log to syslog" \ "\n -i IFACE Interface" \ "\n -f/-F Treat link detection error as link down/link up" \ "\n (otherwise exit on error)" \ "\n -a Don't up interface at each link probe" \ "\n -M Monitor creation/destruction of interface" \ "\n (otherwise it must exist)" \ "\n -A Don't up newly appeared interface" \ "\n -r PROG Script to run" \ "\n -x ARG Extra argument for script" \ "\n -I Don't exit on nonzero exit code from script" \ "\n -p Don't run \"up\" script on startup" \ "\n -q Don't run \"down\" script on exit" \ "\n -l Always run script on startup" \ "\n -t SECS Poll time in seconds" \ "\n -u SECS Delay before running script after link up" \ "\n -d SECS Delay after link down" \ "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \ "\n -k Kill running daemon" \ #define ifup_trivial_usage \ "[-n"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] -a | IFACE..." \ #define ifup_full_usage "\n\n" \ " -a Configure all interfaces" \ "\n -i FILE Use FILE instead of /etc/network/interfaces" \ "\n -n Dry run" \ IF_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force" \ #define ifdown_trivial_usage \ "[-n"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] -a | IFACE..." \ #define ifdown_full_usage "\n\n" \ " -a Deconfigure all interfaces" \ "\n -i FILE Use FILE instead of /etc/network/interfaces" \ "\n -n Dry run" \ IF_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force" \ #define inetd_trivial_usage \ "[-fe] [-q N] [-R N] [CONFFILE]" \ #define inetd_full_usage "\n\n" \ "Listen for network connections and launch programs\n" \ "\n -f Run in foreground" \ "\n -e Log to stderr" \ "\n -q N Socket listen queue (default 128)" \ "\n -R N Pause services after N connects/min" \ "\n (default 0 - disabled)" \ "\n Default CONFFILE is /etc/inetd.conf" \ #define ipaddr_trivial_usage \ "add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]" \ #define ipaddr_full_usage "\n\n" \ "ipaddr add|change|replace|delete dev IFACE [CONFFLAG-LIST] IFADDR\n" \ " IFADDR := PREFIX | ADDR peer PREFIX [broadcast ADDR|+|-]\n" \ " [anycast ADDR] [label STRING] [scope SCOPE]\n" \ " PREFIX := ADDR[/MASK]\n" \ " SCOPE := [host|link|global|NUMBER]\n" \ " CONFFLAG-LIST := [CONFFLAG-LIST] CONFFLAG\n" \ " CONFFLAG := [noprefixroute]\n" \ "ipaddr show|flush [dev IFACE] [scope SCOPE] [to PREFIX] [label PATTERN]" \ #define iplink_trivial_usage \ /*Usage:iplink*/"set IFACE [up|down] [arp on|off] [multicast on|off]\n" \ " [promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]\n" \ " [master IFACE | nomaster] [netns PID]" \ #define iplink_full_usage "\n" \ "iplink add [link IFACE] IFACE [address MAC] type TYPE [ARGS]\n" \ "iplink delete IFACE type TYPE [ARGS]\n" \ " TYPE ARGS := vlan VLANARGS | vrf table NUM\n" \ " VLANARGS := id VLANID [protocol 802.1q|802.1ad] [reorder_hdr on|off]\n" \ " [gvrp on|off] [mvrp on|off] [loose_binding on|off]\n" \ "iplink show [IFACE]" \ #define iproute_trivial_usage \ "list|flush|add|del|change|append|replace|test ROUTE" \ #define iproute_full_usage "\n\n" \ "iproute list|flush SELECTOR\n" \ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ " PREFIX := default|ADDR[/MASK]\n" \ "iproute get ADDR [from ADDR iif IFACE]\n" \ " [oif IFACE] [tos TOS]\n" \ "iproute add|del|change|append|replace|test ROUTE\n" \ " ROUTE := NODE_SPEC [INFO_SPEC]\n" \ " NODE_SPEC := PREFIX"IF_FEATURE_IP_RULE(" [table TABLE_ID]")" [proto RTPROTO] [scope SCOPE] [metric METRIC]\n" \ " INFO_SPEC := NH OPTIONS\n" \ " NH := [via [inet|inet6] ADDR] [dev IFACE] [src ADDR] [onlink]\n" \ " OPTIONS := [mtu [lock] NUM] [advmss [lock] NUM]" \ #define iprule_trivial_usage \ "[list] | add|del SELECTOR ACTION" \ #define iprule_full_usage "\n\n" \ " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK[/MASK]]\n" \ " [dev IFACE] [pref NUMBER]\n" \ " ACTION := [table TABLE_ID] [nat ADDR]\n" \ " [prohibit|reject|unreachable]\n" \ " [realms [SRCREALM/]DSTREALM]\n" \ " TABLE_ID := [local|main|default|NUMBER]" \ #define iptunnel_trivial_usage \ "add|change|del|show [NAME]\n" \ " [mode ipip|gre|sit] [remote ADDR] [local ADDR] [ttl TTL]" \ #define iptunnel_full_usage "\n\n" \ "iptunnel add|change|del|show [NAME]\n" \ " [mode ipip|gre|sit] [remote ADDR] [local ADDR]\n" \ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \ #define ipneigh_trivial_usage \ "show|flush [to PREFIX] [dev DEV] [nud STATE]" \ #define ipneigh_full_usage "" \ #if ENABLE_FEATURE_IP_ADDRESS || ENABLE_FEATURE_IP_ROUTE \ # define IP_BAR_LINK "|" \ #else \ # define IP_BAR_LINK "" \ #endif \ #if ENABLE_FEATURE_IP_ADDRESS || ENABLE_FEATURE_IP_ROUTE || ENABLE_FEATURE_IP_LINK \ # define IP_BAR_TUNNEL "|" \ #else \ # define IP_BAR_TUNNEL "" \ #endif \ #if ENABLE_FEATURE_IP_ADDRESS || ENABLE_FEATURE_IP_ROUTE || ENABLE_FEATURE_IP_LINK || ENABLE_FEATURE_IP_TUNNEL \ # define IP_BAR_NEIGH "|" \ #else \ # define IP_BAR_NEIGH "" \ #endif \ #if ENABLE_FEATURE_IP_ADDRESS || ENABLE_FEATURE_IP_ROUTE || ENABLE_FEATURE_IP_LINK || ENABLE_FEATURE_IP_TUNNEL || ENABLE_FEATURE_IP_NEIGH \ # define IP_BAR_RULE "|" \ #else \ # define IP_BAR_RULE "" \ #endif \ #define ip_trivial_usage \ "[OPTIONS] " \ IF_FEATURE_IP_ADDRESS("address") \ IF_FEATURE_IP_ROUTE( IF_FEATURE_IP_ADDRESS("|")"route") \ IF_FEATURE_IP_LINK( IP_BAR_LINK "link") \ IF_FEATURE_IP_TUNNEL( IP_BAR_TUNNEL"tunnel") \ IF_FEATURE_IP_NEIGH( IP_BAR_NEIGH "neigh") \ IF_FEATURE_IP_RULE( IP_BAR_RULE "rule") \ " [ARGS]" \ #define ip_full_usage "\n\n" \ "OPTIONS := -f[amily] inet|inet6|link | -o[neline]\n" \ IF_FEATURE_IP_ADDRESS("\n" \ "ip addr "ipaddr_trivial_usage) \ IF_FEATURE_IP_ROUTE("\n" \ "ip route "iproute_trivial_usage) \ IF_FEATURE_IP_LINK("\n" \ "ip link "iplink_trivial_usage) \ IF_FEATURE_IP_TUNNEL("\n" \ "ip tunnel "iptunnel_trivial_usage) \ IF_FEATURE_IP_NEIGH("\n" \ "ip neigh "ipneigh_trivial_usage) \ IF_FEATURE_IP_RULE("\n" \ "ip rule "iprule_trivial_usage) \ #define ipcalc_trivial_usage \ "[-bnm"IF_FEATURE_IPCALC_FANCY("phs")"] ADDRESS" \ IF_FEATURE_IPCALC_FANCY("[/PREFIX]") " [NETMASK]" \ #define ipcalc_full_usage "\n\n" \ "Calculate and display network settings from IP address\n" \ "\n -b Broadcast address" \ "\n -n Network address" \ "\n -m Default netmask for IP" \ IF_FEATURE_IPCALC_FANCY( \ "\n -p Prefix for IP/NETMASK" \ "\n -h Resolved host name" \ "\n -s No error messages" \ ) \ #define fakeidentd_trivial_usage \ "[-fiw] [-b ADDR] [STRING]" \ #define fakeidentd_full_usage "\n\n" \ "Provide fake ident (auth) service\n" \ "\n -f Run in foreground" \ "\n -i Inetd mode" \ "\n -w Inetd 'wait' mode" \ "\n -b ADDR Bind to specified address" \ "\n STRING Ident answer string (default: nobody)" \ #define nameif_trivial_usage \ IF_NOT_FEATURE_NAMEIF_EXTENDED( \ "[-s] [-c FILE] [IFNAME HWADDR]..." \ ) \ IF_FEATURE_NAMEIF_EXTENDED( \ "[-s] [-c FILE] [IFNAME SELECTOR]..." \ ) \ #define nameif_full_usage "\n\n" \ "Rename network interface while it in the down state." \ IF_NOT_FEATURE_NAMEIF_EXTENDED( \ "\nThe device with address HWADDR is renamed to IFNAME." \ ) \ IF_FEATURE_NAMEIF_EXTENDED( \ "\nThe device matched by SELECTOR is renamed to IFNAME." \ "\nSELECTOR can be a combination of:" \ "\n driver=STRING" \ "\n bus=STRING" \ "\n phy_address=NUM" \ "\n [mac=]XX:XX:XX:XX:XX:XX" \ ) \ "\n" \ "\n -c FILE Configuration file (default: /etc/mactab)" \ "\n -s Log to syslog" \ #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ "$ nameif -c /etc/my_mactab_file\n" \ #define nbdclient_trivial_usage \ "{ [-b BLKSIZE] [-N NAME] [-t SEC] [-p] HOST [PORT] | -d } BLOCKDEV" \ #define nbdclient_full_usage "\n\n" \ "Connect to HOST and provide network block device on BLOCKDEV" \ #if !ENABLE_NC_110_COMPAT \ #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA \ #define NC_OPTIONS_STR "\n" \ #else \ #define NC_OPTIONS_STR \ #endif \ #define nc_trivial_usage \ IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \ "["IF_NC_EXTRA("-f FILE|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]") \ #define nc_full_usage "\n\n" \ "Open a pipe to IP:PORT" IF_NC_EXTRA(" or FILE") \ NC_OPTIONS_STR \ IF_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ IF_NC_EXTRA( \ "\n (use -ll with -e for persistent server)" \ ) \ "\n -p PORT Local port" \ ) \ IF_NC_EXTRA( \ "\n -w SEC Connect timeout" \ "\n -i SEC Delay interval for lines sent" \ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ "\n -e PROG Run PROG after connect" \ ) \ #define nc_notes_usage "" \ IF_NC_EXTRA( \ "To use netcat as a terminal emulator on a serial port:\n\n" \ "$ stty 115200 -F /dev/ttyS0\n" \ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ ) \ #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ "help\n" \ "214-Commands supported:\n" \ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ "214 NOOP QUIT RSET HELP\n" \ "quit\n" \ "221 foobar closing connection\n" \ #endif \ #if ENABLE_NC_110_COMPAT \ #define nc_trivial_usage \ "[OPTIONS] HOST PORT - connect" \ IF_NC_SERVER("\n" \ "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen" \ ) \ #define nc_full_usage "\n\n" \ " -e PROG Run PROG after connect (must be last)" \ IF_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ "\n -lk With -e, provides persistent server" \ ) \ "\n -p PORT Local port" \ "\n -s ADDR Local address" \ "\n -w SEC Timeout for connects and final net reads" \ IF_NC_EXTRA( \ "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \ ) \ "\n -n Don't do DNS resolution" \ "\n -u UDP mode" \ "\n -b Allow broadcasts" \ "\n -v Verbose" \ IF_NC_EXTRA( \ "\n -o FILE Hex dump traffic" \ "\n -z Zero-I/O mode (scanning)" \ ) \ #endif \ #define netstat_trivial_usage \ "[-"IF_ROUTE("r")"al] [-tuwx] [-en"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]" \ #define netstat_full_usage "\n\n" \ "Display networking information\n" \ IF_ROUTE( \ "\n -r Routing table" \ ) \ "\n -a All sockets" \ "\n -l Listening sockets" \ "\n Else: connected sockets" \ "\n -t TCP sockets" \ "\n -u UDP sockets" \ "\n -w Raw sockets" \ "\n -x Unix sockets" \ "\n Else: all socket types" \ "\n -e Other/more information" \ "\n -n Don't resolve names" \ IF_FEATURE_NETSTAT_WIDE( \ "\n -W Wide display" \ ) \ IF_FEATURE_NETSTAT_PRG( \ "\n -p Show PID/program name for sockets" \ ) \ #define nslookup_trivial_usage \ IF_FEATURE_NSLOOKUP_BIG("[-type=QUERY_TYPE] [-debug] ") "HOST [DNS_SERVER]" \ #define nslookup_full_usage "\n\n" \ "Query DNS about HOST" \ IF_FEATURE_NSLOOKUP_BIG("\n") \ IF_FEATURE_NSLOOKUP_BIG("\nQUERY_TYPE: soa,ns,a,"IF_FEATURE_IPV6("aaaa,")"cname,mx,txt,ptr,srv,any") \ #define nslookup_example_usage \ "$ nslookup localhost\n" \ "Server: default\n" \ "Address: default\n" \ "\n" \ "Name: debian\n" \ "Address: 127.0.0.1\n" \ #define ntpd_trivial_usage \ "[-dnqNw"IF_FEATURE_NTPD_SERVER("l] [-I IFACE")"] [-S PROG]" \ IF_NOT_FEATURE_NTP_AUTH(" [-p PEER]...") \ IF_FEATURE_NTP_AUTH(" [-k KEYFILE] [-p [keyno:N:]PEER]...") \ #define ntpd_full_usage "\n\n" \ "NTP client/server\n" \ "\n -d[d] Verbose" \ "\n -n Run in foreground" \ "\n -q Quit after clock is set" \ "\n -N Run at high priority" \ "\n -w Do not set time (only query peers), implies -n" \ "\n -S PROG Run PROG after stepping time, stratum change, and every 11 min" \ IF_NOT_FEATURE_NTP_AUTH( \ "\n -p PEER Obtain time from PEER (may be repeated)" \ ) \ IF_FEATURE_NTP_AUTH( \ "\n -k FILE Key file (ntp.keys compatible)" \ "\n -p [keyno:NUM:]PEER" \ "\n Obtain time from PEER (may be repeated)" \ "\n Use key NUM for authentication" \ ) \ IF_FEATURE_NTPD_CONF( \ "\n If -p is not given, 'server HOST' lines" \ "\n from /etc/ntp.conf are used" \ ) \ IF_FEATURE_NTPD_SERVER( \ "\n -l Also run as server on port 123" \ "\n -I IFACE Bind server to IFACE, implies -l" \ ) \ #if !ENABLE_FEATURE_FANCY_PING \ # define ping_trivial_usage \ "HOST" \ # define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUESTs to HOST" \ # define ping6_trivial_usage \ "HOST" \ # define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUESTs to HOST" \ #else \ # define ping_trivial_usage \ "[OPTIONS] HOST" \ # define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUESTs to HOST\n" \ IF_PING6( \ "\n -4,-6 Force IP or IPv6 name resolution" \ ) \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default 56)" \ "\n -i SECS Interval" \ "\n -A Ping as soon as reply is received" \ "\n -t TTL Set TTL" \ "\n -I IFACE/IP Source interface or IP address" \ "\n -W SEC Seconds to wait for the first response (default 10)" \ "\n (after all -c CNT packets are sent)" \ "\n -w SEC Seconds until ping exits (default:infinite)" \ "\n (can exit earlier with -c CNT)" \ "\n -q Quiet, only display output at start/finish" \ "\n -p HEXBYTE Payload pattern" \ # define ping6_trivial_usage \ "[OPTIONS] HOST" \ # define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUESTs to HOST\n" \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default 56)" \ "\n -i SECS Interval" \ "\n -A Ping as soon as reply is received" \ "\n -I IFACE/IP Source interface or IP address" \ "\n -W SEC Seconds to wait for the first response (default 10)" \ "\n (after all -c CNT packets are sent)" \ "\n -w SEC Seconds until ping exits (default:infinite)" \ "\n (can exit earlier with -c CNT)" \ "\n -q Quiet, only display output at start/finish" \ "\n -p HEXBYTE Payload pattern" \ #endif \ #define ping_example_usage \ "$ ping localhost\n" \ "PING slag (127.0.0.1): 56 data bytes\n" \ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ "\n" \ "--- debian ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" \ #define ping6_example_usage \ "$ ping6 ip6-localhost\n" \ "PING ip6-localhost (::1): 56 data bytes\n" \ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ "\n" \ "--- ip6-localhost ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" \ #define pscan_trivial_usage \ "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" \ #define pscan_full_usage "\n\n" \ "Scan HOST, print all open ports\n" \ "\n -c Show closed ports too" \ "\n -b Show blocked ports too" \ "\n -p PORT Scan from this port (default 1)" \ "\n -P PORT Scan up to this port (default 1024)" \ "\n -t MS Timeout (default 5000 ms)" \ "\n -T MS Minimum rtt (default 5 ms)" \ #define route_trivial_usage \ "[-ne]"IF_FEATURE_IPV6(" [-A inet[6]]")" [{add|del} [-net|-host] TARGET [netmask MASK]\n" \ " [gw GATEWAY] [metric N] [mss BYTES] [window BYTES] [reject] [IFACE]]" \ #define route_full_usage "\n\n" \ "Show or edit kernel routing tables\n" \ "\n -n Don't resolve names" \ "\n -e Display other/more information" \ "\n -A inet" IF_FEATURE_IPV6("[6]") " Select address family" \ #define slattach_trivial_usage \ "[-ehmLF] [-c SCRIPT] [-s BAUD] [-p PROTOCOL] SERIAL_DEVICE" \ #define slattach_full_usage "\n\n" \ "Configure serial line as SLIP network interface\n" \ "\n -p PROT Protocol: slip, cslip (default), slip6, clisp6, adaptive" \ "\n -s BAUD Line speed" \ "\n -e Exit after initialization" \ "\n -h Exit if carrier is lost (else never exits)" \ "\n -c PROG Run PROG on carrier loss" \ "\n -m Do NOT set raw 8bit mode" \ "\n -L Enable 3-wire operation" \ "\n -F Disable RTS/CTS flow control" \ #define ssl_client_trivial_usage \ "[-e] -s FD [-r FD] [-n SNI]" \ #define ssl_client_full_usage "" \ #define tc_trivial_usage \ "OBJECT CMD [dev STRING]" \ #define tc_full_usage "\n\n" \ "OBJECT: qdisc|class|filter\n" \ "CMD: add|del|change|replace|show\n" \ "\n" \ "qdisc [handle QHANDLE] [root|"IF_FEATURE_TC_INGRESS("ingress|")"parent CLASSID]\n" \ " [[QDISC_KIND] [help|OPTIONS]]\n" \ " QDISC_KIND := [p|b]fifo|tbf|prio|cbq|red|etc.\n" \ "qdisc show [dev STRING]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \ "class [classid CLASSID] [root|parent CLASSID]\n" \ " [[QDISC_KIND] [help|OPTIONS] ]\n" \ "class show [ dev STRING ] [root|parent CLASSID]\n" \ "filter [pref PRIO] [protocol PROTO]\n" \ " [root|classid CLASSID] [handle FILTERID]\n" \ " [[FILTER_TYPE] [help|OPTIONS]]\n" \ "filter show [dev STRING] [root|parent CLASSID]" \ #define tcpsvd_trivial_usage \ "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG" \ #define tcpsvd_full_usage "\n\n" \ "Create TCP socket, bind to IP:PORT and listen for incoming connections.\n" \ "Run PROG for each connection.\n" \ "\n IP PORT IP:PORT to listen on" \ "\n PROG ARGS Program to run" \ "\n -u USER[:GRP] Change to user/group after bind" \ "\n -c N Up to N connections simultaneously (default 30)" \ "\n -b N Allow backlog of approximately N TCP SYNs (default 20)" \ "\n -C N[:MSG] Allow only up to N connections from the same IP:" \ "\n new connections from this IP address are closed" \ "\n immediately, MSG is written to the peer before close" \ "\n -E Don't set up environment" \ "\n -h Look up peer's hostname" \ "\n -l NAME Local hostname (else look up local hostname in DNS)" \ "\n -v Verbose" \ "\n" \ "\nEnvironment if no -E:" \ "\nPROTO='TCP'" \ "\nTCPREMOTEADDR='ip:port'" IF_FEATURE_IPV6(" ('[ip]:port' for IPv6)") \ "\nTCPLOCALADDR='ip:port'" \ "\nTCPORIGDSTADDR='ip:port' of destination before firewall" \ "\n Useful for REDIRECTed-to-local connections:" \ "\n iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to 8080" \ "\nTCPCONCURRENCY=num_of_connects_from_this_ip" \ "\nIf -h:" \ "\nTCPLOCALHOST='hostname' (-l NAME is used if specified)" \ "\nTCPREMOTEHOST='hostname'" \ #define udpsvd_trivial_usage \ "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG" \ #define udpsvd_full_usage "\n\n" \ "Create UDP socket, bind to IP:PORT and wait for incoming packets.\n" \ "Run PROG for each packet, redirecting all further packets with same\n" \ "peer ip:port to it.\n" \ "\n IP PORT IP:PORT to listen on" \ "\n PROG ARGS Program to run" \ "\n -u USER[:GRP] Change to user/group after bind" \ "\n -c N Up to N connections simultaneously (default 30)" \ "\n -E Don't set up environment" \ "\n -h Look up peer's hostname" \ "\n -l NAME Local hostname (else look up local hostname in DNS)" \ "\n -v Verbose" \ "\n" \ "\nEnvironment if no -E:" \ "\nPROTO='UDP'" \ "\nUDPREMOTEADDR='ip:port'" IF_FEATURE_IPV6(" ('[ip]:port' for IPv6)") \ "\nUDPLOCALADDR='ip:port'" \ "\nIf -h:" \ "\nUDPLOCALHOST='hostname' (-l NAME is used if specified)" \ "\nUDPREMOTEHOST='hostname'" \ #if ENABLE_FEATURE_TELNET_AUTOLOGIN \ #define telnet_trivial_usage \ "[-a] [-l USER] HOST [PORT]" \ #define telnet_full_usage "\n\n" \ "Connect to telnet server\n" \ "\n -a Automatic login with $USER variable" \ "\n -l USER Automatic login as USER" \ #else \ #define telnet_trivial_usage \ "HOST [PORT]" \ #define telnet_full_usage "\n\n" \ "Connect to telnet server" \ #endif \ #define telnetd_trivial_usage \ "[OPTIONS]" \ #define telnetd_full_usage "\n\n" \ "Handle incoming telnet connections" \ IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \ "\n -l LOGIN Exec LOGIN on connect" \ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \ "\n -K Close connection as soon as login exits" \ "\n (normally wait until all programs close slave pty)" \ IF_FEATURE_TELNETD_STANDALONE( \ "\n -p PORT Port to listen on. Default "STR(CONFIG_FEATURE_TELNETD_PORT_DEFAULT) \ "\n -b ADDR[:PORT] Address to bind to" \ "\n -F Run in foreground" \ "\n -i Inetd mode" \ IF_FEATURE_TELNETD_INETD_WAIT( \ "\n -w SEC Inetd 'wait' mode, linger time SEC" \ "\n inetd.conf line: 23 stream tcp wait root telnetd telnetd -w10" \ "\n -S Log to syslog (implied by -i or without -F and -w)" \ ) \ ) \ #define tftp_trivial_usage \ "[OPTIONS] HOST [PORT]" \ #define tftp_full_usage "\n\n" \ "Transfer a file from/to tftp server\n" \ "\n -l FILE Local FILE" \ "\n -r FILE Remote FILE" \ IF_FEATURE_TFTP_GET( \ "\n -g Get file" \ ) \ IF_FEATURE_TFTP_PUT( \ "\n -p Put file" \ ) \ IF_FEATURE_TFTP_BLOCKSIZE( \ "\n -b SIZE Transfer blocks in bytes" \ ) \ #define tftpd_trivial_usage \ "[-crl] [-u USER] [DIR]" \ #define tftpd_full_usage "\n\n" \ "Transfer a file on tftp client's request\n" \ "\n" \ "tftpd is an inetd service, inetd.conf line:\n" \ " 69 dgram udp nowait root tftpd tftpd -l /files/to/serve\n" \ "Can be run from udpsvd:\n" \ " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \ "\n -r Prohibit upload" \ "\n -c Allow file creation via upload" \ "\n -u USER Access files as USER" \ "\n -l Log to syslog (inetd mode requires this)" \ #define traceroute_trivial_usage \ "[-"IF_TRACEROUTE6("46")IF_FEATURE_TRACEROUTE_USE_ICMP("I")"Flnrv] [-f 1ST_TTL] [-m MAXTTL] [-q PROBES] [-p PORT]\n" \ " [-t TOS] [-w WAIT_SEC] [-s SRC_IP] [-i IFACE]\n" \ " [-z PAUSE_MSEC] HOST [BYTES]" \ #define traceroute_full_usage "\n\n" \ "Trace the route to HOST\n" \ IF_TRACEROUTE6( \ "\n -4,-6 Force IP or IPv6 name resolution" \ ) \ "\n -F Set don't fragment bit" \ IF_FEATURE_TRACEROUTE_USE_ICMP( \ "\n -I Use ICMP ECHO instead of UDP datagrams" \ ) \ "\n -l Display TTL value of the returned packet" \ "\n -n Print numeric addresses" \ "\n -r Bypass routing tables, send directly to HOST" \ IF_FEATURE_TRACEROUTE_VERBOSE( \ "\n -v Verbose" \ ) \ "\n -f N First number of hops (default 1)" \ "\n -m N Max number of hops" \ "\n -q N Number of probes per hop (default 3)" \ "\n -p N Base UDP port number used in probes" \ "\n (default 33434)" \ "\n -s IP Source address" \ "\n -i IFACE Source interface" \ "\n -t N Type-of-service in probe packets (default 0)" \ "\n -w SEC Wait for a response (default 3)" \ "\n -z MSEC Wait before each send" \ #define traceroute6_trivial_usage \ "[-"IF_FEATURE_TRACEROUTE_USE_ICMP("I")"nrv] [-f 1ST_TTL] [-m MAXTTL] [-q PROBES] [-p PORT]\n" \ " [-t TOS] [-w WAIT_SEC] [-s SRC_IP] [-i IFACE]\n" \ " [-z PAUSE_MSEC] HOST [BYTES]" \ #define traceroute6_full_usage "\n\n" \ "Trace the route to HOST\n" \ IF_FEATURE_TRACEROUTE_USE_ICMP( \ "\n -I Use ICMP ECHO instead of UDP datagrams" \ ) \ "\n -n Print numeric addresses" \ "\n -r Bypass routing tables, send directly to HOST" \ IF_FEATURE_TRACEROUTE_VERBOSE( \ "\n -v Verbose" \ ) \ "\n -f N First number of hops (default 1)" \ "\n -m N Max number of hops" \ "\n -q N Number of probes per hop (default 3)" \ "\n -p N Base UDP port number used in probes" \ "\n (default 33434)" \ "\n -s IP Source address" \ "\n -i IFACE Source interface" \ "\n -t N Type-of-service in probe packets (default 0)" \ "\n -w SEC Wait for a response (default 3)" \ "\n -z MSEC Wait before each send" \ #define tunctl_trivial_usage \ "[-f DEVICE] [-t NAME | -d NAME]" IF_FEATURE_TUNCTL_UG(" [-u USER] [-g GRP] [-b]") \ #define tunctl_full_usage "\n\n" \ "Create or delete TUN/TAP interfaces\n" \ "\n -f DEV TUN device (default /dev/net/tun)" \ "\n -t NAME Create iface (default: tapN)" \ "\n -d NAME Delete iface" \ IF_FEATURE_TUNCTL_UG( \ "\n -u USER Set iface owner" \ "\n -g GRP Set iface group" \ "\n -b Brief output" \ ) \ #define tunctl_example_usage \ "# tunctl\n" \ "# tunctl -d tun0\n" \ #define vconfig_trivial_usage \ "COMMAND [OPTIONS]" \ #define vconfig_full_usage "\n\n" \ "Create and remove virtual ethernet devices\n" \ "\n add IFACE VLAN_ID" \ "\n rem VLAN_NAME" \ "\n set_flag IFACE 0|1 VLAN_QOS" \ "\n set_egress_map VLAN_NAME SKB_PRIO VLAN_QOS" \ "\n set_ingress_map VLAN_NAME SKB_PRIO VLAN_QOS" \ "\n set_name_type NAME_TYPE" \ #define wget_trivial_usage \ IF_FEATURE_WGET_LONG_OPTIONS( \ "[-cqS] [--spider] [-O FILE] [-o LOGFILE] [--header STR]\n" \ " [--post-data STR | --post-file FILE] [-Y on/off]\n" \ " "IF_FEATURE_WGET_OPENSSL("[--no-check-certificate] ")"[-P DIR] [-U AGENT]"IF_FEATURE_WGET_TIMEOUT(" [-T SEC]")" URL..." \ ) \ IF_NOT_FEATURE_WGET_LONG_OPTIONS( \ "[-cqS] [-O FILE] [-o LOGFILE] [-Y on/off] [-P DIR] [-U AGENT]"IF_FEATURE_WGET_TIMEOUT(" [-T SEC]")" URL..." \ ) \ #define wget_full_usage "\n\n" \ "Retrieve files via HTTP or FTP\n" \ IF_FEATURE_WGET_LONG_OPTIONS( \ "\n --spider Only check URL existence: $? is 0 if exists" \ "\n --header STR Add STR (of form 'header: value') to headers" \ "\n --post-data STR Send STR using POST method" \ "\n --post-file FILE Send FILE using POST method" \ IF_FEATURE_WGET_OPENSSL( \ "\n --no-check-certificate Don't validate the server's certificate" \ ) \ ) \ "\n -c Continue retrieval of aborted transfer" \ "\n -q Quiet" \ "\n -P DIR Save to DIR (default .)" \ "\n -S Show server response" \ IF_FEATURE_WGET_TIMEOUT( \ "\n -T SEC Network read timeout is SEC seconds" \ ) \ "\n -O FILE Save to FILE ('-' for stdout)" \ "\n -o LOGFILE Log messages to FILE" \ "\n -U STR Use STR for User-Agent header" \ "\n -Y on/off Use proxy" \ #define whois_trivial_usage \ "[-i] [-h SERVER] [-p PORT] NAME..." \ #define whois_full_usage "\n\n" \ "Query WHOIS info about NAME\n" \ "\n -i Show redirect results too" \ "\n -h,-p Server to query" \ #define zcip_trivial_usage \ "[OPTIONS] IFACE SCRIPT" \ #define zcip_full_usage "\n\n" \ "Manage a ZeroConf IPv4 link-local address\n" \ "\n -f Run in foreground" \ "\n -q Quit after obtaining address" \ "\n -r 169.254.x.x Request this address first" \ "\n -l x.x.0.0 Use this range instead of 169.254" \ "\n -v Verbose" \ "\n" \ "\n$LOGGING=none Suppress logging" \ "\n$LOGGING=syslog Log to syslog" \ "\n" \ "\nWith no -q, runs continuously monitoring for ARP conflicts," \ "\nexits only on I/O errors (link down etc)" \ #define lpd_trivial_usage \ "SPOOLDIR [HELPER [ARGS]]" \ #define lpd_full_usage "\n\n" \ "SPOOLDIR must contain (symlinks to) device nodes or directories" \ "\nwith names matching print queue names. In the first case, jobs are" \ "\nsent directly to the device. Otherwise each job is stored in queue" \ "\ndirectory and HELPER program is called. Name of file to print" \ "\nis passed in $DATAFILE variable." \ "\nExample:" \ "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \ #define lpr_trivial_usage \ "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..." \ #define lpr_full_usage "\n\n" \ " -P lp service to connect to (else uses $PRINTER)" \ "\n -m Send mail on completion" \ "\n -h Print banner page too" \ "\n -V Verbose" \ #define lpq_trivial_usage \ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]" \ #define lpq_full_usage "\n\n" \ " -P lp service to connect to (else uses $PRINTER)" \ "\n -d Delete jobs" \ "\n -f Force any waiting job to be printed" \ "\n -s Short display" \ #define free_trivial_usage \ "" IF_DESKTOP("[-bkmgh]") \ #define free_full_usage "\n\n" \ "Display free and used memory" \ #define free_example_usage \ "$ free\n" \ " total used free shared buffers\n" \ " Mem: 257628 248724 8904 59644 93124\n" \ " Swap: 128516 8404 120112\n" \ "Total: 386144 257128 129016\n" \ #define fuser_trivial_usage \ "[-msk46] [-SIGNAL] FILE or PORT/PROTO" \ #define fuser_full_usage "\n\n" \ "Find processes which use FILEs or PORTs\n" \ "\n -m Find processes which use same fs as FILEs" \ "\n -4,-6 Search only IPv4/IPv6 space" \ "\n -s Don't display PIDs" \ "\n -k Kill found processes" \ "\n -SIGNAL Signal to send (default: KILL)" \ #define iostat_trivial_usage \ "[-c] [-d] [-t] [-z] [-k|-m] [ALL|BLOCKDEV...] [INTERVAL [COUNT]]" \ #define iostat_full_usage "\n\n" \ "Report CPU and I/O statistics\n" \ "\n -c Show CPU utilization" \ "\n -d Show device utilization" \ "\n -t Print current time" \ "\n -z Omit devices with no activity" \ "\n -k Use kb/s" \ "\n -m Use Mb/s" \ #define kill_trivial_usage \ "[-l] [-SIG] PID..." \ #define kill_full_usage "\n\n" \ "Send a signal (default: TERM) to given PIDs\n" \ "\n -l List all signal names and numbers" \ #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ "263 www-data www-data S [apache]\n" \ "264 www-data www-data S [apache]\n" \ "265 www-data www-data S [apache]\n" \ "266 www-data www-data S [apache]\n" \ "267 www-data www-data S [apache]\n" \ "$ kill 252\n" \ #define killall_trivial_usage \ "[-lq] [-SIG] PROCESS_NAME..." \ #define killall_full_usage "\n\n" \ "Send a signal (default: TERM) to given processes\n" \ "\n -l List all signal names and numbers" \ "\n -q Don't complain if no processes were killed" \ #define killall_example_usage \ "$ killall apache\n" \ #define killall5_trivial_usage \ "[-l] [-SIG] [-o PID]..." \ #define killall5_full_usage "\n\n" \ "Send a signal (default: TERM) to all processes outside current session\n" \ "\n -l List all signal names and numbers" \ "\n -o PID Don't signal this PID" \ #define lsof_trivial_usage \ "" \ #define lsof_full_usage "\n\n" \ "Show all open files" \ #define mpstat_trivial_usage \ "[-A] [-I SUM|CPU|ALL|SCPU] [-u] [-P num|ALL] [INTERVAL [COUNT]]" \ #define mpstat_full_usage "\n\n" \ "Per-processor statistics\n" \ "\n -A Same as -I ALL -u -P ALL" \ "\n -I SUM|CPU|ALL|SCPU Report interrupt statistics" \ "\n -P num|ALL Processor to monitor" \ "\n -u Report CPU utilization" \ #define nmeter_trivial_usage \ "[-d MSEC] FORMAT_STRING" \ #define nmeter_full_usage "\n\n" \ "Monitor system in real time" \ "\n" \ "\n -d MSEC Milliseconds between updates, default:1000, none:-1" \ "\n" \ "\nFormat specifiers:" \ "\n %Nc or %[cN] CPU. N - bar size (default 10)" \ "\n (displays: S:system U:user N:niced D:iowait I:irq i:softirq)" \ "\n %[nINTERFACE] Network INTERFACE" \ "\n %m Allocated memory" \ "\n %[md] Dirty file-backed memory" \ "\n %[mw] Memory being written to storage" \ "\n %[mf] Free memory" \ "\n %[mt] Total memory" \ "\n %s Allocated swap" \ "\n %f Number of used file descriptors" \ "\n %Ni Total/specific IRQ rate" \ "\n %x Context switch rate" \ "\n %p Forks" \ "\n %[pn] # of processes" \ "\n %b Block io" \ "\n %Nt Time (with N decimal points)" \ "\n %NT Zero-based timestamp (with N decimal points)" \ "\n %r Print instead of at EOL" \ #define pgrep_trivial_usage \ "[-flanovx] [-s SID|-P PPID|PATTERN]" \ #define pgrep_full_usage "\n\n" \ "Display process(es) selected by regex PATTERN\n" \ "\n -l Show command name too" \ "\n -a Show command line too" \ "\n -f Match against entire command line" \ "\n -n Show the newest process only" \ "\n -o Show the oldest process only" \ "\n -v Negate the match" \ "\n -x Match whole name (not substring)" \ "\n -s Match session ID (0 for current)" \ "\n -P Match parent process ID" \ #define pkill_trivial_usage \ "[-l|-SIGNAL] [-xfvnoe] [-s SID|-P PPID|PATTERN]" \ #define pkill_full_usage "\n\n" \ "Send signal to processes selected by regex PATTERN\n" \ "\n -l List all signals" \ "\n -x Match whole name (not substring)" \ "\n -f Match against entire command line" \ "\n -s SID Match session ID (0 for current)" \ "\n -P PPID Match parent process ID" \ "\n -v Negate the match" \ "\n -n Signal the newest process only" \ "\n -o Signal the oldest process only" \ "\n -e Display name and PID of the process being killed" \ #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) \ #define pidof_trivial_usage \ IF_FEATURE_PIDOF_SINGLE("[-s] ")IF_FEATURE_PIDOF_OMIT("[-o PID] ")"[NAME]..." \ #define USAGE_PIDOF "\n" \ #else \ #define pidof_trivial_usage \ "[NAME]..." \ #define USAGE_PIDOF /* none */ \ #endif \ #define pidof_full_usage "\n\n" \ "List PIDs of all processes with names that match NAMEs" \ USAGE_PIDOF \ IF_FEATURE_PIDOF_SINGLE( \ "\n -s Show only one PID" \ ) \ IF_FEATURE_PIDOF_OMIT( \ "\n -o PID Omit given pid" \ "\n Use %PPID to omit pid of pidof's parent" \ ) \ #define pidof_example_usage \ "$ pidof init\n" \ "1\n" \ IF_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh\n20351 5973 5950\n") \ IF_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh -o %PPID\n20351 5950") \ #define pmap_trivial_usage \ "[-xq] PID..." \ #define pmap_full_usage "\n\n" \ "Display process memory usage" \ "\n" \ "\n -x Show details" \ "\n -q Quiet" \ #define powertop_trivial_usage \ "" \ #define powertop_full_usage "\n\n" \ "Analyze power consumption on Intel-based laptops" \ #if ENABLE_DESKTOP \ #define ps_trivial_usage \ "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]") \ #define ps_full_usage "\n\n" \ "Show list of processes\n" \ "\n -o COL1,COL2=HEADER Select columns for display" \ IF_FEATURE_SHOW_THREADS( \ "\n -T Show threads" \ ) \ #else /* !ENABLE_DESKTOP */ \ #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE \ #define USAGE_PS "\nThis version of ps accepts no options" \ #else \ #define USAGE_PS "" \ #endif \ #define ps_trivial_usage \ "" \ #define ps_full_usage "\n\n" \ "Show list of processes\n" \ USAGE_PS \ IF_SELINUX( \ "\n -Z Show selinux context" \ ) \ IF_FEATURE_PS_WIDE( \ "\n w Wide output" \ ) \ IF_FEATURE_PS_LONG( \ "\n l Long output" \ ) \ IF_FEATURE_SHOW_THREADS( \ "\n T Show threads" \ ) \ #endif /* ENABLE_DESKTOP */ \ #define ps_example_usage \ "$ ps\n" \ " PID Uid Gid State Command\n" \ " 1 root root S init\n" \ " 2 root root S [kflushd]\n" \ " 3 root root S [kupdate]\n" \ " 4 root root S [kpiod]\n" \ " 5 root root S [kswapd]\n" \ " 742 andersen andersen S [bash]\n" \ " 743 andersen andersen S -bash\n" \ " 745 root root S [getty]\n" \ " 2990 andersen andersen R ps\n" \ #define pstree_trivial_usage \ "[-p] [PID|USER]" \ #define pstree_full_usage "\n\n" \ "Display process tree, optionally start from USER or PID\n" \ "\n -p Show pids" \ #define pwdx_trivial_usage \ "PID..." \ #define pwdx_full_usage "\n\n" \ "Show current directory for PIDs" \ #define smemcap_trivial_usage ">SMEMDATA.TAR" \ #define smemcap_full_usage "\n\n" \ "Collect memory usage data in /proc and write it to stdout" \ #define sysctl_trivial_usage \ "[-enq] { -a | -p [FILE]... | [-w] [KEY[=VALUE]]... }" \ #define sysctl_full_usage "\n\n" \ "Show/set kernel parameters\n" \ "\n -e Don't warn about unknown keys" \ "\n -n Don't show key names" \ "\n -q Quiet" \ "\n -a Show all values" \ "\n -p Set values from FILEs (default /etc/sysctl.conf)" \ "\n -w Set values" \ #define sysctl_example_usage \ "sysctl [-n] [-e] variable...\n" \ "sysctl [-n] [-e] [-q] -w variable=value...\n" \ "sysctl [-n] [-e] -a\n" \ "sysctl [-n] [-e] [-q] -p file (default /etc/sysctl.conf)\n" \ "sysctl [-n] [-e] -A\n" \ #if ENABLE_FEATURE_SHOW_THREADS || ENABLE_FEATURE_TOP_SMP_CPU \ # define IF_SHOW_THREADS_OR_TOP_SMP(...) __VA_ARGS__ \ #else \ # define IF_SHOW_THREADS_OR_TOP_SMP(...) \ #endif \ #define top_trivial_usage \ "[-b"IF_FEATURE_TOPMEM("m")IF_FEATURE_SHOW_THREADS("H")"]" \ " [-n COUNT] [-d SECONDS]" \ #define top_full_usage "\n\n" \ "Show a view of process activity in real time." \ "\n""Read the status of all processes from /proc each SECONDS" \ "\n""and show a screenful of them." \ "\n" \ IF_FEATURE_TOP_INTERACTIVE( \ "Keys:" \ "\n"" N/M" \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/P") \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/T") \ ": " IF_FEATURE_TOPMEM("show CPU usage, ") "sort by pid/mem" \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/cpu") \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/time") \ IF_FEATURE_TOPMEM( \ "\n"" S: show memory" \ ) \ "\n"" R: reverse sort" \ IF_SHOW_THREADS_OR_TOP_SMP( \ "\n"" " \ IF_FEATURE_SHOW_THREADS("H: toggle threads") \ IF_FEATURE_SHOW_THREADS(IF_FEATURE_TOP_SMP_CPU(", ")) \ IF_FEATURE_TOP_SMP_CPU("1: toggle SMP") \ ) \ "\n"" Q,^C: exit" \ "\n""Options:" \ ) \ "\n"" -b Batch mode" \ "\n"" -n N Exit after N iterations" \ "\n"" -d SEC Delay between updates" \ IF_FEATURE_TOPMEM( \ "\n"" -m Same as 's' key" \ ) \ IF_FEATURE_SHOW_THREADS( \ "\n"" -H Show threads" \ ) \ #define uptime_trivial_usage \ "" \ #define uptime_full_usage "\n\n" \ "Display the time since the last boot" \ #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" \ #define watch_trivial_usage \ "[-n SEC] [-t] PROG ARGS" \ #define watch_full_usage "\n\n" \ "Run PROG periodically\n" \ "\n -n SEC Period (default 2)" \ "\n -t Don't print header" \ #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ "Mon Dec 17 10:31:42 GMT 2000\n" \ "Mon Dec 17 10:31:44 GMT 2000" \ #define chpst_trivial_usage \ "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \ " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \ " [-p N] [-f BYTES] [-c BYTES] PROG ARGS" \ #define chpst_full_usage "\n\n" \ "Change the process state, run PROG\n" \ "\n -u USER[:GRP] Set uid and gid" \ "\n -U USER[:GRP] Set $UID and $GID in environment" \ "\n -e DIR Set environment variables as specified by files" \ "\n in DIR: file=1st_line_of_file" \ "\n -/ DIR Chroot to DIR" \ "\n -n NICE Add NICE to nice value" \ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \ "\n -d BYTES Limit data segment" \ "\n -o N Limit number of open files per process" \ "\n -p N Limit number of processes per uid" \ "\n -f BYTES Limit output file sizes" \ "\n -c BYTES Limit core file size" \ "\n -v Verbose" \ "\n -P Create new process group" \ "\n -0 Close stdin" \ "\n -1 Close stdout" \ "\n -2 Close stderr" \ #define envdir_trivial_usage \ "DIR PROG ARGS" \ #define envdir_full_usage "\n\n" \ "Set various environment variables as specified by files\n" \ "in the directory DIR, run PROG" \ #define envuidgid_trivial_usage \ "USER PROG ARGS" \ #define envuidgid_full_usage "\n\n" \ "Set $UID to USER's uid and $GID to USER's gid, run PROG" \ #define setuidgid_trivial_usage \ "USER PROG ARGS" \ #define setuidgid_full_usage "\n\n" \ "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \ "run PROG" \ #define softlimit_trivial_usage \ "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \ " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \ " PROG ARGS" \ #define softlimit_full_usage "\n\n" \ "Set soft resource limits, then run PROG\n" \ "\n -a BYTES Limit total size of all segments" \ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \ "\n -d BYTES Limit data segment" \ "\n -s BYTES Limit stack segment" \ "\n -l BYTES Limit locked memory size" \ "\n -o N Limit number of open files per process" \ "\n -p N Limit number of processes per uid" \ "\nOptions controlling file sizes:" \ "\n -f BYTES Limit output file sizes" \ "\n -c BYTES Limit core file size" \ "\nEfficiency opts:" \ "\n -r BYTES Limit resident set size" \ "\n -t N Limit CPU time, process receives" \ "\n a SIGXCPU after N seconds" \ #define runsv_trivial_usage \ "DIR" \ #define runsv_full_usage "\n\n" \ "Start and monitor a service and optionally an appendant log service" \ #define runsvdir_trivial_usage \ "[-P] [-s SCRIPT] DIR" \ #define runsvdir_full_usage "\n\n" \ "Start a runsv process for each subdirectory. If it exits, restart it.\n" \ "\n -P Put each runsv in a new session" \ "\n -s SCRIPT Run SCRIPT after signal is processed" \ #define sv_trivial_usage \ "[-v] [-w SEC] CMD SERVICE_DIR..." \ #define sv_full_usage "\n\n" \ "Control services monitored by runsv supervisor.\n" \ "Commands (only first character is enough):\n" \ "\n" \ "status: query service status\n" \ "up: if service isn't running, start it. If service stops, restart it\n" \ "once: like 'up', but if service stops, don't restart it\n" \ "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \ " if it exists. After it stops, don't restart service\n" \ "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ " runsv exits too\n" \ "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \ #define svc_trivial_usage \ "[-udopchaitkx] SERVICE_DIR..." \ #define svc_full_usage "\n\n" \ "Control services monitored by runsv supervisor" \ "\n" \ "\n"" -u If service is not running, start it; restart if it stops" \ "\n"" -d If service is running, send TERM+CONT signals; do not restart it" \ "\n"" -o Once: if service is not running, start it; do not restart it" \ "\n"" -pchaitk Send STOP, CONT, HUP, ALRM, INT, TERM, KILL signal to service" \ "\n"" -x Exit: runsv will exit as soon as the service is down" \ #define svok_trivial_usage \ "SERVICE_DIR" \ #define svok_full_usage "\n\n" \ "Check whether runsv supervisor is running.\n" \ "Exit code is 0 if it does, 100 if it does not,\n" \ "111 (with error message) if SERVICE_DIR does not exist." \ #define svlogd_trivial_usage \ "[-tttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..." \ #define svlogd_full_usage "\n\n" \ "Read log data from stdin and write to rotated log files in DIRs" \ "\n" \ "\n"" -r C Replace non-printable characters with C" \ "\n"" -R CHARS Also replace CHARS with C (default _)" \ "\n"" -t Timestamp with @tai64n" \ "\n"" -tt Timestamp with yyyy-mm-dd_hh:mm:ss.sssss" \ "\n"" -ttt Timestamp with yyyy-mm-ddThh:mm:ss.sssss" \ "\n"" -v Verbose" \ "\n" \ "\n""DIR/config file modifies behavior:" \ "\n""sSIZE - when to rotate logs (default 1000000, 0 disables)" \ "\n""nNUM - number of files to retain" \ "\n""!PROG - process rotated log with PROG" \ "\n""+,-PATTERN - (de)select line for logging" \ "\n""E,ePATTERN - (de)select line for stderr" \ #define chcon_trivial_usage \ "[-chfRv] CONTEXT FILE..." \ "\n chcon [-chfRv] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \ IF_LONG_OPTS( \ "\n chcon [-chfRv] --reference=RFILE FILE..." \ ) \ #define chcon_full_usage "\n\n" \ "Change the security context of FILEs to CONTEXT\n" \ "\n -v Verbose" \ "\n -c Report changes made" \ "\n -h Affect symlinks instead of their targets" \ "\n -f Suppress most error messages" \ IF_LONG_OPTS( \ "\n --reference RFILE Use RFILE's group instead of using a CONTEXT value" \ ) \ "\n -u USER Set user/role/type/range in the target security context" \ "\n -r ROLE" \ "\n -t TYPE" \ "\n -l RANGE" \ "\n -R Recurse" \ #define getenforce_trivial_usage NOUSAGE_STR \ #define getenforce_full_usage "" \ #define getsebool_trivial_usage \ "-a or getsebool boolean..." \ #define getsebool_full_usage "\n\n" \ " -a Show all selinux booleans" \ #define load_policy_trivial_usage NOUSAGE_STR \ #define load_policy_full_usage "" \ #define matchpathcon_trivial_usage \ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" \ #define matchpathcon_full_usage "\n\n" \ " -n Don't display path" \ "\n -N Don't use translations" \ "\n -f Use alternate file_context file" \ "\n -p Use prefix to speed translations" \ "\n -V Verify file context on disk matches defaults" \ #define runcon_trivial_usage \ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \ "runcon CONTEXT PROG ARGS" \ #define runcon_full_usage "\n\n" \ "Run PROG in a different security context\n" \ "\n CONTEXT Complete security context\n" \ "\n -c Compute process transition context before modifying" \ "\n -t TYPE Type (for same role as parent)" \ "\n -u USER User identity" \ "\n -r ROLE Role" \ "\n -l RNG Levelrange" \ #define selinuxenabled_trivial_usage NOUSAGE_STR \ #define selinuxenabled_full_usage "" \ #define sestatus_trivial_usage \ "[-vb]" \ #define sestatus_full_usage "\n\n" \ " -v Verbose" \ "\n -b Display current state of booleans" \ #define setenforce_trivial_usage \ "[Enforcing | Permissive | 1 | 0]" \ #define setenforce_full_usage "" \ #define setfiles_trivial_usage \ "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \ IF_FEATURE_SETFILES_CHECK_OPTION( \ " [-c policyfile] spec_file" \ ) \ " pathname" \ #define setfiles_full_usage "\n\n" \ "Reset file contexts under pathname according to spec_file\n" \ IF_FEATURE_SETFILES_CHECK_OPTION( \ "\n -c FILE Check the validity of the contexts against the specified binary policy" \ ) \ "\n -d Show which specification matched each file" \ "\n -l Log changes in file labels to syslog" \ "\n -n Don't change any file labels" \ "\n -q Suppress warnings" \ "\n -r DIR Use an alternate root path" \ "\n -e DIR Exclude DIR" \ "\n -F Force reset of context to match file_context for customizable files" \ "\n -o FILE Save list of files with incorrect context" \ "\n -s Take a list of files from stdin (instead of command line)" \ "\n -v Show changes in file labels, if type or role are changing" \ "\n -vv Show changes in file labels, if type, role, or user are changing" \ "\n -W Display warnings about entries that had no matching files" \ #define restorecon_trivial_usage \ "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]" \ #define restorecon_full_usage "\n\n" \ "Reset security contexts of files in pathname\n" \ "\n -i Ignore files that don't exist" \ "\n -f FILE File with list of files to process" \ "\n -e DIR Directory to exclude" \ "\n -R,-r Recurse" \ "\n -n Don't change any file labels" \ "\n -o FILE Save list of files with incorrect context" \ "\n -v Verbose" \ "\n -vv Show changed labels" \ "\n -F Force reset of context to match file_context" \ "\n for customizable files, or the user section," \ "\n if it has changed" \ #define setsebool_trivial_usage \ "boolean value" \ #define setsebool_full_usage "\n\n" \ "Change boolean setting" \ #define ash_trivial_usage \ "[-il] [-|+Cabefmnuvx] [-|+o OPT]... [-c 'SCRIPT' [ARG0 ARGS] | FILE ARGS | -s ARGS]" \ #define ash_full_usage "\n\n" \ "Unix shell interpreter" \ #define cttyhack_trivial_usage \ "[PROG ARGS]" \ #define cttyhack_full_usage "\n\n" \ "Give PROG a controlling tty if possible." \ "\nExample for /etc/inittab (for busybox init):" \ "\n ::respawn:/bin/cttyhack /bin/sh" \ "\nGiving controlling tty to shell running with PID 1:" \ "\n $ exec cttyhack sh" \ "\nStarting interactive shell from boot shell script:" \ "\n setsid cttyhack sh" \ #define hush_trivial_usage \ "[-enxl] [-c 'SCRIPT' [ARG0 ARGS] | FILE ARGS | -s ARGS]" \ #define hush_full_usage "\n\n" \ "Unix shell interpreter" \ #define klogd_trivial_usage \ "[-c N] [-n]" \ #define klogd_full_usage "\n\n" \ "Log kernel messages to syslog\n" \ "\n -c N Print to console messages more urgent than prio N (1-8)" \ "\n -n Run in foreground" \ #define logger_trivial_usage \ "[-s] [-t TAG] [-p PRIO] [MESSAGE]" \ #define logger_full_usage "\n\n" \ "Write MESSAGE (or stdin) to syslog\n" \ "\n -s Log to stderr as well as the system log" \ "\n -t TAG Log using the specified tag (defaults to user name)" \ "\n -p PRIO Priority (number or FACILITY.LEVEL pair)" \ #define logger_example_usage \ "$ logger \"hello\"\n" \ #define logread_trivial_usage \ "[-fF]" \ #define logread_full_usage "\n\n" \ "Show messages in syslogd's circular buffer\n" \ "\n -f Output data as log grows" \ "\n -F Same as -f, but dump buffer first" \ #define syslogd_trivial_usage \ "[OPTIONS]" \ #define syslogd_full_usage "\n\n" \ "System logging utility\n" \ IF_NOT_FEATURE_SYSLOGD_CFG( \ "(this version of syslogd ignores /etc/syslog.conf)\n" \ ) \ "\n -n Run in foreground" \ IF_FEATURE_REMOTE_LOG( \ "\n -R HOST[:PORT] Log to HOST:PORT (default PORT:514)" \ "\n -L Log locally and via network (default is network only if -R)" \ ) \ IF_FEATURE_IPC_SYSLOG( \ "\n -C[size_kb] Log to shared mem buffer (use logread to read it)" \ ) \ IF_FEATURE_KMSG_SYSLOG( \ "\n -K Log to kernel printk buffer (use dmesg to read it)" \ ) \ "\n -O FILE Log to FILE (default: /var/log/messages, stdout if -)" \ IF_FEATURE_ROTATE_LOGFILE( \ "\n -s SIZE Max size (KB) before rotation (default 200KB, 0=off)" \ "\n -b N N rotated logs to keep (default 1, max 99, 0=purge)" \ ) \ "\n -l N Log only messages more urgent than prio N (1-8)" \ "\n -S Smaller output" \ "\n -t Strip client-generated timestamps" \ IF_FEATURE_SYSLOGD_DUP( \ "\n -D Drop duplicates" \ ) \ IF_FEATURE_SYSLOGD_CFG( \ "\n -f FILE Use FILE as config (default:/etc/syslog.conf)" \ ) \ #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" \ #define acpid_trivial_usage \ "[-df] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]" \ #define acpid_full_usage "\n\n" \ "Listen to ACPI events and spawn specific helpers on event arrival\n" \ "\n -d Log to stderr, not log file (implies -f)" \ "\n -f Run in foreground" \ "\n -c DIR Config directory [/etc/acpi]" \ "\n -e FILE /proc event file [/proc/acpi/event]" \ "\n -l FILE Log file [/var/log/acpid.log]" \ IF_FEATURE_PIDFILE( \ "\n -p FILE Pid file [" CONFIG_PID_FILE_PATH "/acpid.pid]" \ ) \ "\n -a FILE Action file [/etc/acpid.conf]" \ "\n -M FILE Map file [/etc/acpi.map]" \ IF_FEATURE_ACPID_COMPAT( \ "\n\nAccept and ignore compatibility options -g -m -s -S -v" \ ) \ #define acpid_example_usage \ "Without -e option, acpid uses all /dev/input/event* files\n" \ "# acpid\n" \ "# acpid -l /var/log/my-acpi-log\n" \ "# acpid -e /proc/acpi/event\n" \ #define blkdiscard_trivial_usage \ "[-o OFS] [-l LEN] [-s] DEVICE" \ #define blkdiscard_full_usage "\n\n" \ "Discard sectors on DEVICE\n" \ "\n -o OFS Byte offset into device" \ "\n -l LEN Number of bytes to discard" \ "\n -s Perform a secure discard" \ #define blkdiscard_example_usage \ "$ blkdiscard -o 0 -l 1G /dev/sdb" \ #define blkid_trivial_usage \ "[BLOCKDEV]..." \ #define blkid_full_usage "\n\n" \ "Print UUIDs of all filesystems" \ #define blockdev_trivial_usage \ "OPTION BLOCKDEV" \ #define blockdev_full_usage "\n\n" \ " --setro Set ro" \ "\n --setrw Set rw" \ "\n --getro Get ro" \ "\n --getss Get sector size" \ "\n --getbsz Get block size" \ "\n --setbsz BYTES Set block size" \ "\n --getsz Get device size in 512-byte sectors" \ "\n --getsize64 Get device size in bytes" \ "\n --getra Get readahead in 512-byte sectors" \ "\n --setra SECTORS Set readahead" \ "\n --flushbufs Flush buffers" \ "\n --rereadpt Reread partition table" \ #define cal_trivial_usage \ "[-jmy] [[MONTH] YEAR]" \ #define cal_full_usage "\n\n" \ "Display a calendar\n" \ "\n -j Use julian dates" \ "\n -m Week starts on Monday" \ "\n -y Display the entire year" \ #define chrt_trivial_usage \ "-m | -p [PRIO] PID | [-rfobi] PRIO PROG ARGS" \ #define chrt_full_usage "\n\n" \ "Change scheduling priority and class for a process\n" \ "\n -m Show min/max priorities" \ "\n -p Operate on PID" \ "\n -r Set SCHED_RR class" \ "\n -f Set SCHED_FIFO class" \ "\n -o Set SCHED_OTHER class" \ "\n -b Set SCHED_BATCH class" \ "\n -i Set SCHED_IDLE class" \ #define chrt_example_usage \ "$ chrt -r 4 sleep 900; x=$!\n" \ "$ chrt -f -p 3 $x\n" \ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process" \ #define dmesg_trivial_usage \ "[-cr] [-n LEVEL] [-s SIZE]" \ #define dmesg_full_usage "\n\n" \ "Print or control the kernel ring buffer\n" \ "\n -c Clear ring buffer after printing" \ "\n -n LEVEL Set console logging level" \ "\n -s SIZE Buffer size" \ "\n -r Print raw message buffer" \ #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" \ #define eject_full_usage "\n\n" \ "Eject DEVICE or default /dev/cdrom\n" \ IF_FEATURE_EJECT_SCSI( \ "\n -s SCSI device" \ ) \ "\n -t Close tray" \ "\n -T Open/close tray (toggle)" \ #define fallocate_trivial_usage \ "[-o OFS] -l LEN FILE" \ #define fallocate_full_usage "\n\n" \ "Preallocate space for FILE\n" \ "\n -o OFS Offset of range" \ "\n -l LEN Length of range" \ #define fatattr_trivial_usage \ "[-+rhsvda] FILE..." \ #define fatattr_full_usage "\n\n" \ "Change file attributes on FAT filesystem\n" \ "\n - Clear attributes" \ "\n + Set attributes" \ "\n r Read only" \ "\n h Hidden" \ "\n s System" \ "\n v Volume label" \ "\n d Directory" \ "\n a Archive" \ #define fbset_trivial_usage \ "[OPTIONS] [MODE]" \ #define fbset_full_usage "\n\n" \ "Show and modify frame buffer settings" \ #define fbset_example_usage \ "$ fbset\n" \ "mode \"1024x768-76\"\n" \ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ " geometry 1024 768 1024 768 16\n" \ " timings 12714 128 32 16 4 128 4\n" \ " accel false\n" \ " rgba 5/11,6/5,5/0,0/0\n" \ "endmode\n" \ #define fdformat_trivial_usage \ "[-n] DEVICE" \ #define fdformat_full_usage "\n\n" \ "Format floppy disk\n" \ "\n -n Don't verify after format" \ #ifndef ENABLE_FEATURE_FDISK_BLKSIZE \ # define ENABLE_FEATURE_FDISK_BLKSIZE 0 \ # define IF_FEATURE_FDISK_BLKSIZE(a) \ #endif \ #define fdisk_trivial_usage \ "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \ "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" \ #define fdisk_full_usage "\n\n" \ "Change partition table\n" \ "\n -u Start and End are in sectors (instead of cylinders)" \ "\n -l Show partition table for each DISK, then exit" \ IF_FEATURE_FDISK_BLKSIZE( \ "\n -s Show partition sizes in kb for each DISK, then exit" \ ) \ "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \ "\n -C CYLINDERS Set number of cylinders/heads/sectors" \ "\n -H HEADS Typically 255" \ "\n -S SECTORS Typically 63" \ #define findfs_trivial_usage \ "LABEL=label or UUID=uuid" \ #define findfs_full_usage "\n\n" \ "Find a filesystem device based on a label or UUID" \ #define findfs_example_usage \ "$ findfs LABEL=MyDevice" \ #define flock_trivial_usage \ "[-sxun] FD | { FILE [-c] PROG ARGS }" \ #define flock_full_usage "\n\n" \ "[Un]lock file descriptor, or lock FILE, run PROG\n" \ "\n -s Shared lock" \ "\n -x Exclusive lock (default)" \ "\n -u Unlock FD" \ "\n -n Fail rather than wait" \ #define freeramdisk_trivial_usage \ "DEVICE" \ #define freeramdisk_full_usage "\n\n" \ "Free all memory used by the specified ramdisk" \ #define freeramdisk_example_usage \ "$ freeramdisk /dev/ram2\n" \ #define fdflush_trivial_usage \ "DEVICE" \ #define fdflush_full_usage "\n\n" \ "Force floppy disk drive to detect disk change" \ #define fsck_minix_trivial_usage \ "[-larvsmf] BLOCKDEV" \ #define fsck_minix_full_usage "\n\n" \ "Check MINIX filesystem\n" \ "\n -l List all filenames" \ "\n -r Perform interactive repairs" \ "\n -a Perform automatic repairs" \ "\n -v Verbose" \ "\n -s Output superblock information" \ "\n -m Show \"mode not cleared\" warnings" \ "\n -f Force file system check" \ #define fsfreeze_trivial_usage \ "--[un]freeze MOUNTPOINT" \ #define fsfreeze_full_usage "\n\n" \ "Flush and halt writes to MOUNTPOINT" \ #define fstrim_trivial_usage \ "[OPTIONS] MOUNTPOINT" \ #define fstrim_full_usage "\n\n" \ " -o OFFSET Offset in bytes to discard from" \ "\n -l LEN Bytes to discard" \ "\n -m MIN Minimum extent length" \ "\n -v Print number of discarded bytes" \ #define getopt_trivial_usage \ "[OPTIONS] [--] OPTSTRING PARAMS" \ #define getopt_full_usage "\n\n" \ IF_FEATURE_GETOPT_LONG( \ " -a Allow long options starting with single -\n" \ " -l LOPT[,...] Long options to recognize\n" \ ) \ " -n PROGNAME The name under which errors are reported" \ "\n -o OPTSTRING Short options to recognize" \ "\n -q No error messages on unrecognized options" \ "\n -Q No normal output" \ "\n -s SHELL Set shell quoting conventions" \ "\n -T Version test (exits with 4)" \ "\n -u Don't quote output" \ IF_FEATURE_GETOPT_LONG( /* example uses -l, needs FEATURE_GETOPT_LONG */ \ "\n" \ "\nExample:" \ "\n" \ "\nO=`getopt -l bb: -- ab:c:: \"$@\"` || exit 1" \ "\neval set -- \"$O\"" \ "\nwhile true; do" \ "\n case \"$1\" in" \ "\n -a) echo A; shift;;" \ "\n -b|--bb) echo \"B:'$2'\"; shift 2;;" \ "\n -c) case \"$2\" in" \ "\n \"\") echo C; shift 2;;" \ "\n *) echo \"C:'$2'\"; shift 2;;" \ "\n esac;;" \ "\n --) shift; break;;" \ "\n *) echo Error; exit 1;;" \ "\n esac" \ "\ndone" \ ) \ #define getopt_example_usage \ "$ cat getopt.test\n" \ "#!/bin/sh\n" \ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ " -n 'example.busybox' -- \"$@\"`\n" \ "if [ $? != 0 ]; then exit 1; fi\n" \ "eval set -- \"$GETOPT\"\n" \ "while true; do\n" \ " case $1 in\n" \ " -a|--a-long) echo \"Option a\"; shift;;\n" \ " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \ " -c|--c-long)\n" \ " case \"$2\" in\n" \ " \"\") echo \"Option c, no argument\"; shift 2;;\n" \ " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \ " esac;;\n" \ " --) shift; break;;\n" \ " *) echo \"Internal error!\"; exit 1;;\n" \ " esac\n" \ "done\n" \ #define hexdump_trivial_usage \ "[-bcdoxCv] [-e FMT] [-f FMT_FILE] [-n LEN] [-s OFS] [FILE]..." \ #define hexdump_full_usage "\n\n" \ "Display FILEs (or stdin) in a user specified format\n" \ "\n -b 1-byte octal display" \ "\n -c 1-byte character display" \ "\n -d 2-byte decimal display" \ "\n -o 2-byte octal display" \ "\n -x 2-byte hex display" \ "\n -C hex+ASCII 16 bytes per line" \ "\n -v Show all (no dup folding)" \ "\n -e FORMAT_STR Example: '16/1 \"%02x|\"\"\\n\"'" \ "\n -f FORMAT_FILE" \ "\n -n LENGTH Show only first LENGTH bytes" \ "\n -s OFFSET Skip OFFSET bytes" \ #define hd_trivial_usage \ "FILE..." \ #define hd_full_usage "\n\n" \ "hd is an alias for hexdump -C" \ #define xxd_trivial_usage \ "[-pri] [-g N] [-c N] [-l LEN] [-s OFS] [-o OFS] [FILE]" \ #define xxd_full_usage "\n\n" \ "Hex dump FILE (or stdin)\n" \ "\n -g N Bytes per group" \ "\n -c N Bytes per line" \ "\n -p Show only hex bytes, assumes -c30" \ "\n -i C include file style" \ "\n -l LENGTH Show only first LENGTH bytes" \ "\n -s OFFSET Skip OFFSET bytes" \ "\n -o OFFSET Add OFFSET to displayed offset" \ "\n -r Reverse (with -p, assumes no offsets in input)" \ #define hwclock_trivial_usage \ IF_LONG_OPTS( \ "[-swul] [--systz] [-f DEV]" \ ) \ IF_NOT_LONG_OPTS( \ "[-swult] [-f DEV]" \ ) \ #define hwclock_full_usage "\n\n" \ "Show or set hardware clock (RTC)\n" \ "\n -s Set system time from RTC" \ "\n -w Set RTC from system time" \ IF_LONG_OPTS( \ "\n --systz Set in-kernel timezone, correct system time" \ "\n if RTC is kept in local time" \ ) \ "\n -f DEV Use specified device (e.g. /dev/rtc2)" \ "\n -u Assume RTC is kept in UTC" \ "\n -l Assume RTC is kept in local time" \ "\n (if neither is given, read from "ADJTIME_PATH")" \ #define ionice_trivial_usage \ "[-c 1-3] [-n 0-7] [-t] { -p PID | PROG ARGS }" \ #define ionice_full_usage "\n\n" \ "Change I/O priority and class\n" \ "\n -c N Class. 1:realtime 2:best-effort 3:idle" \ "\n -n N Priority" \ "\n -t Ignore errors" \ #define ipcrm_trivial_usage \ "[-MQS key] [-mqs id]" \ #define ipcrm_full_usage "\n\n" \ "Upper-case options MQS remove an object by shmkey value.\n" \ "Lower-case options remove an object by shmid value.\n" \ "\n -mM Remove memory segment after last detach" \ "\n -qQ Remove message queue" \ "\n -sS Remove semaphore" \ #define ipcs_trivial_usage \ "[[-smq] -i SHMID] | [[-asmq] [-tcplu]]" \ #define ipcs_full_usage "\n\n" \ " -i ID Show specific resource" \ "\nResource specification:" \ "\n -m Shared memory segments" \ "\n -q Message queues" \ "\n -s Semaphore arrays" \ "\n -a All (default)" \ "\nOutput format:" \ "\n -t Time" \ "\n -c Creator" \ "\n -p Pid" \ "\n -l Limits" \ "\n -u Summary" \ #define last_trivial_usage \ ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]") \ #define last_full_usage "\n\n" \ "Show listing of the last users that logged into the system" \ IF_FEATURE_LAST_FANCY( "\n" \ "\n -W Display with no host column truncation" \ "\n -f FILE Read from FILE instead of /var/log/wtmp" \ ) \ #define losetup_trivial_usage \ "[-rP] [-o OFS] {-f|LOOPDEV} FILE: associate loop devices\n" \ " losetup -c LOOPDEV: reread file size\n" \ " losetup -d LOOPDEV: disassociate\n" \ " losetup -a: show status\n" \ " losetup -f: show next free loop device" \ #define losetup_full_usage "\n\n" \ " -o OFS Start OFS bytes into FILE" \ "\n -P Scan for partitions" \ "\n -r Read-only" \ "\n -f Show/use next free loop device" \ #define losetup_notes_usage \ "One argument (losetup /dev/loop1) will display the current association\n" \ "(if any), or disassociate it (with -d). The display shows the offset\n" \ "and filename of the file the loop device is currently bound to.\n\n" \ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ "with optional partition scanning (creates /dev/loop1p1, /dev/loop1p2\n" \ "etc. with -P) and with an optional offset (-o 12345). Encryption is\n" \ "not yet supported. losetup -f will show the first free loop device\n\n" \ #define lspci_trivial_usage \ "[-mk]" \ #define lspci_full_usage "\n\n" \ "List all PCI devices" \ "\n" \ "\n -m Parsable output" \ "\n -k Show driver" \ #define lsusb_trivial_usage NOUSAGE_STR \ #define lsusb_full_usage "" \ #define mdev_trivial_usage \ "[-vS] " IF_FEATURE_MDEV_DAEMON("{ ") "[-s]" IF_FEATURE_MDEV_DAEMON(" | [-df] }") \ #define mdev_full_usage "\n\n" \ " -v Verbose\n" \ " -S Log to syslog too\n" \ " -s Scan /sys and populate /dev\n" \ IF_FEATURE_MDEV_DAEMON( \ " -d Daemon, listen on netlink\n" \ " -f Run in foreground\n" \ ) \ "\n" \ "Bare mdev is a kernel hotplug helper. To activate it:\n" \ " echo /sbin/mdev >/proc/sys/kernel/hotplug\n" \ IF_FEATURE_MDEV_CONF( \ "\n" \ "It uses /etc/mdev.conf with lines\n" \ " [-][ENV=regex;]...DEVNAME UID:GID PERM" \ IF_FEATURE_MDEV_RENAME(" [>|=PATH]|[!]") \ IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \ "\n" \ "where DEVNAME is device name regex, @major,minor[-minor2], or\n" \ "environment variable regex. A common use of the latter is\n" \ "to load modules for hotplugged devices:\n" \ " $MODALIAS=.* 0:0 660 @modprobe \"$MODALIAS\"\n" \ ) \ "\n" \ "If /dev/mdev.seq file exists, mdev will wait for its value\n" \ "to match $SEQNUM variable. This prevents plug/unplug races.\n" \ "To activate this feature, create empty /dev/mdev.seq at boot.\n" \ "\n" \ "If /dev/mdev.log file exists, debug log will be appended to it." \ #define mesg_trivial_usage \ "[y|n]" \ #define mesg_full_usage "\n\n" \ "Control write access to your terminal\n" \ " y Allow write access to your terminal\n" \ " n Disallow write access to your terminal" \ #define mkfs_ext2_trivial_usage \ "[-Fn] " \ "[-b BLK_SIZE] " \ "[-i INODE_RATIO] [-I INODE_SIZE] " \ "[-m RESERVED_PERCENT] " \ "[-L LABEL] " \ "BLOCKDEV [KBYTES]" \ #define mkfs_ext2_full_usage "\n\n" \ " -b BLK_SIZE Block size, bytes" \ "\n -F Force" \ "\n -i RATIO Max number of files is filesystem_size / RATIO" \ "\n -I BYTES Inode size (min 128)" \ "\n -L LBL Volume label" \ "\n -m PERCENT Percent of blocks to reserve for admin" \ "\n -n Dry run" \ #define mkfs_minix_trivial_usage \ "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]" \ #define mkfs_minix_full_usage "\n\n" \ "Make a MINIX filesystem\n" \ "\n -c Check device for bad blocks" \ "\n -n [14|30] Maximum length of filenames" \ "\n -i INODES Number of inodes for the filesystem" \ "\n -l FILE Read bad blocks list from FILE" \ "\n -v Make version 2 filesystem" \ #define mkfs_reiser_trivial_usage \ "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]" \ #define mkfs_reiser_full_usage "\n\n" \ "Make a ReiserFS V3 filesystem\n" \ "\n -f Force" \ "\n -l LBL Volume label" \ #define mkfs_vfat_trivial_usage \ "[-v] [-n LABEL] BLOCKDEV [KBYTES]" \ #define mkfs_vfat_full_usage "\n\n" \ "Make a FAT32 filesystem\n" \ "\n -v Verbose" \ "\n -n LBL Volume label" \ #define mkswap_trivial_usage \ "[-L LBL] BLOCKDEV [KBYTES]" \ #define mkswap_full_usage "\n\n" \ "Prepare BLOCKDEV to be used as swap partition\n" \ "\n -L LBL Label" \ #define more_trivial_usage \ "[FILE]..." \ #define more_full_usage "\n\n" \ "View FILE (or stdin) one screenful at a time" \ #define more_example_usage \ "$ dmesg | more\n" \ #define mount_trivial_usage \ "[OPTIONS] [-o OPT] DEVICE NODE" \ #define mount_full_usage "\n\n" \ "Mount a filesystem. Filesystem autodetection requires /proc.\n" \ "\n -a Mount all filesystems in fstab" \ IF_FEATURE_MOUNT_FAKE( \ IF_FEATURE_MTAB_SUPPORT( \ "\n -f Update /etc/mtab, but don't mount" \ ) \ IF_NOT_FEATURE_MTAB_SUPPORT( \ "\n -f Dry run" \ ) \ ) \ IF_FEATURE_MOUNT_HELPERS( \ "\n -i Don't run mount helper" \ ) \ IF_FEATURE_MTAB_SUPPORT( \ "\n -n Don't update /etc/mtab" \ ) \ IF_FEATURE_MOUNT_VERBOSE( \ "\n -v Verbose" \ ) \ "\n -r Read-only mount" \ "\n -t FSTYPE[,...] Filesystem type(s)" \ IF_FEATURE_MOUNT_OTHERTAB( \ "\n -T FILE Read FILE instead of /etc/fstab" \ ) \ "\n -O OPT Mount only filesystems with option OPT (-a only)" \ "\n-o OPT:" \ IF_FEATURE_MOUNT_LOOP( \ "\n loop Ignored (loop devices are autodetected)" \ ) \ IF_FEATURE_MOUNT_FLAGS( \ "\n [a]sync Writes are [a]synchronous" \ "\n [no]atime Disable/enable updates to inode access times" \ "\n [no]diratime Disable/enable atime updates to directories" \ "\n [no]relatime Disable/enable atime updates relative to modification time" \ "\n [no]dev (Dis)allow use of special device files" \ "\n [no]exec (Dis)allow use of executable files" \ "\n [no]suid (Dis)allow set-user-id-root programs" \ "\n [r]shared Convert [recursively] to a shared subtree" \ "\n [r]slave Convert [recursively] to a slave subtree" \ "\n [r]private Convert [recursively] to a private subtree" \ "\n [un]bindable Make mount point [un]able to be bind mounted" \ "\n [r]bind Bind a file or directory [recursively] to another location" \ "\n move Relocate an existing mount point" \ ) \ "\n remount Remount a mounted filesystem, changing flags" \ "\n ro Same as -r" \ "\n" \ "\nThere are filesystem-specific -o flags." \ #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ "proc on /proc type proc (rw)\n" \ "devpts on /dev/pts type devpts (rw)\n" \ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ "$ mount cd_image.iso mydir\n" \ #define mount_notes_usage \ "Returns 0 for success, number of failed mounts for -a, or errno for one mount." \ #define mountpoint_trivial_usage \ "[-q] { [-dn] DIR | -x DEVICE }" \ #define mountpoint_full_usage "\n\n" \ "Check if DIR is a mountpoint\n" \ "\n -q Quiet" \ "\n -d Print major:minor of the filesystem" \ "\n -n Print device name of the filesystem" \ "\n -x Print major:minor of DEVICE" \ #define mountpoint_example_usage \ "$ mountpoint /proc\n" \ "/proc is not a mountpoint\n" \ "$ mountpoint /sys\n" \ "/sys is a mountpoint\n" \ #define nologin_trivial_usage \ "" \ #define nologin_full_usage "\n\n" \ "Politely refuse a login" \ #define nsenter_trivial_usage \ "[OPTIONS] [PROG ARGS]" \ #define nsenter_full_usage "\n" \ "\n -t PID Target process to get namespaces from" \ "\n -m[FILE] Enter mount namespace" \ "\n -u[FILE] Enter UTS namespace (hostname etc)" \ "\n -i[FILE] Enter System V IPC namespace" \ "\n -n[FILE] Enter network namespace" \ "\n -p[FILE] Enter pid namespace" \ "\n -U[FILE] Enter user namespace" \ "\n -S UID Set uid in entered namespace" \ "\n -G GID Set gid in entered namespace" \ IF_LONG_OPTS( \ "\n --preserve-credentials Don't touch uids or gids" \ ) \ "\n -r[DIR] Set root directory" \ "\n -w[DIR] Set working directory" \ "\n -F Don't fork before exec'ing PROG" \ #define pivot_root_trivial_usage \ "NEW_ROOT PUT_OLD" \ #define pivot_root_full_usage "\n\n" \ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ "the new root file system" \ #define rdate_trivial_usage \ "[-s/-p] HOST" \ #define rdate_full_usage "\n\n" \ "Set and print time from HOST using RFC 868\n" \ "\n -s Only set system time" \ "\n -p Only print time" \ #define rdev_trivial_usage \ "" \ #define rdev_full_usage "\n\n" \ "Print the device node associated with the filesystem mounted at '/'" \ #define rdev_example_usage \ "$ rdev\n" \ "/dev/mtdblock9 /\n" \ #define readprofile_trivial_usage \ "[OPTIONS]" \ #define readprofile_full_usage "\n\n" \ " -m MAPFILE (Default: /boot/System.map)" \ "\n -p PROFILE (Default: /proc/profile)" \ "\n -M NUM Set the profiling multiplier to NUM" \ "\n -i Print only info about the sampling step" \ "\n -v Verbose" \ "\n -a Print all symbols, even if count is 0" \ "\n -b Print individual histogram-bin counts" \ "\n -s Print individual counters within functions" \ "\n -r Reset all the counters (root only)" \ "\n -n Disable byte order auto-detection" \ #define renice_trivial_usage \ "[-n] PRIORITY [[-p|g|u] ID...]..." \ #define renice_full_usage "\n\n" \ "Change scheduling priority of a running process\n" \ "\n -n Add PRIORITY to current nice value" \ "\n Without -n, nice value is set to PRIORITY" \ "\n -p Process ids (default)" \ "\n -g Process group ids" \ "\n -u Process user names" \ #define rev_trivial_usage \ "[FILE]..." \ #define rev_full_usage "\n\n" \ "Reverse lines of FILE" \ #define rtcwake_trivial_usage \ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]" \ #define rtcwake_full_usage "\n\n" \ "Enter a system sleep state until specified wakeup time\n" \ "\n -a Read clock mode from "ADJTIME_PATH" (default)" \ "\n -l Clock is set to local time" \ "\n -u Clock is set to UTC time" \ "\n -d DEV Specify the RTC device" \ "\n -m MODE Set sleep state (default: standby)" \ "\n -s SEC Set timeout in SEC seconds from now" \ "\n -t TIME Set timeout to TIME seconds from epoch" \ #define script_trivial_usage \ "[-afq] [-t[FILE]] [-c PROG] [OUTFILE]" \ #define script_full_usage "\n\n" \ "Default OUTFILE is 'typescript'" \ "\n" \ "\n -a Append output" \ "\n -c PROG Run PROG, not shell" \ "\n -q Quiet" \ "\n -t[FILE] Send timing to stderr or FILE" \ #define scriptreplay_trivial_usage \ "TIMINGFILE [TYPESCRIPT [DIVISOR]]" \ #define scriptreplay_full_usage "\n\n" \ "Play back typescripts, using timing information" \ #define setarch_trivial_usage \ "PERSONALITY [-R] PROG ARGS" \ #define setarch_full_usage "\n\n" \ "PERSONALITY may be:" \ "\n"" linux32 Set 32bit uname emulation" \ "\n"" linux64 Set 64bit uname emulation" \ "\n" \ "\n"" -R Disable address space randomization" \ #define linux32_trivial_usage NOUSAGE_STR \ #define linux32_full_usage "" \ #define linux64_trivial_usage NOUSAGE_STR \ #define linux64_full_usage "" \ #define setpriv_trivial_usage \ "[OPTIONS] PROG ARGS" \ #define setpriv_full_usage "\n\n" \ "Run PROG with different privilege settings\n" \ IF_FEATURE_SETPRIV_DUMP( \ "\n-d,--dump Show current capabilities" \ ) \ "\n--nnp,--no-new-privs Ignore setuid/setgid bits and file capabilities" \ IF_FEATURE_SETPRIV_CAPABILITIES( \ "\n--inh-caps CAP,CAP Set inheritable capabilities" \ "\n--ambient-caps CAP,CAP Set ambient capabilities" \ ) \ #define setsid_trivial_usage \ "[-c] PROG ARGS" \ #define setsid_full_usage "\n\n" \ "Run PROG in a new session. PROG will have no controlling terminal\n" \ "and will not be affected by keyboard signals (^C etc).\n" \ "\n -c Set controlling terminal to stdin" \ #define swapon_trivial_usage \ "[-a] [-e]" IF_FEATURE_SWAPON_DISCARD(" [-d[POL]]") IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]" \ #define swapon_full_usage "\n\n" \ "Start swapping on DEVICE\n" \ "\n -a Start swapping on all swap devices" \ IF_FEATURE_SWAPON_DISCARD( \ "\n -d[POL] Discard blocks at swapon (POL=once)," \ "\n as freed (POL=pages), or both (POL omitted)" \ ) \ "\n -e Silently skip devices that do not exist" \ IF_FEATURE_SWAPON_PRI( \ "\n -p PRI Set swap device priority" \ ) \ #define swapoff_trivial_usage \ "[-a] [DEVICE]" \ #define swapoff_full_usage "\n\n" \ "Stop swapping on DEVICE\n" \ "\n -a Stop swapping on all swap devices" \ #define switch_root_trivial_usage \ "[-c CONSOLE_DEV] NEW_ROOT NEW_INIT [ARGS]" \ #define switch_root_full_usage "\n\n" \ "Free initramfs and switch to another root fs:\n" \ "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \ "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \ "\n -c DEV Reopen stdio to DEV after switch" \ #define run_init_trivial_usage \ "[-d CAP,CAP...] [-n] [-c CONSOLE_DEV] NEW_ROOT NEW_INIT [ARGS]" \ #define run_init_full_usage "\n\n" \ "Free initramfs and switch to another root fs:\n" \ "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \ "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \ "\n -c DEV Reopen stdio to DEV after switch" \ "\n -d CAPS Drop capabilities" \ "\n -n Dry run" \ #define taskset_trivial_usage \ "[-ap] [HEXMASK"IF_FEATURE_TASKSET_CPULIST(" | -c LIST")"] { PID | PROG ARGS }" \ #define taskset_full_usage "\n\n" \ "Set or get CPU affinity\n" \ "\n -p Operate on PID" \ "\n -a Operate on all threads" \ "\n -c Affinity is a list, not mask" \ #define taskset_example_usage \ "$ taskset 0x7 ./dgemm_test&\n" \ "$ taskset -p 0x1 $!\n" \ "pid 4790's current affinity mask: 7\n" \ "pid 4790's new affinity mask: 1\n" \ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ "pid 6671's current affinity mask: 1\n" \ "pid 6671's new affinity mask: 1\n" \ "$ taskset -p 1\n" \ "pid 1's current affinity mask: 3\n" \ #define uevent_trivial_usage \ "[PROG ARGS]" \ #define uevent_full_usage "\n\n" \ "uevent runs PROG for every netlink notification." \ "\n""PROG's environment contains data passed from the kernel." \ "\n""Typical usage (daemon for dynamic device node creation):" \ "\n"" # uevent mdev & mdev -s" \ #define umount_trivial_usage \ "[-rlf"IF_FEATURE_MTAB_SUPPORT("m")IF_FEATURE_MOUNT_LOOP("d")IF_FEATURE_UMOUNT_ALL("a")"] [-t FSTYPE] FILESYSTEM|DIRECTORY" \ #define umount_full_usage "\n\n" \ "Unmount filesystems\n" \ IF_FEATURE_UMOUNT_ALL( \ "\n -a Unmount all filesystems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ ) \ IF_FEATURE_MTAB_SUPPORT( \ "\n -n Don't erase /etc/mtab entries" \ ) \ "\n -r Remount devices read-only if mount is busy" \ "\n -l Lazy umount (detach filesystem)" \ "\n -f Force umount (i.e., unreachable NFS server)" \ IF_FEATURE_MOUNT_LOOP( \ "\n -d Free loop device if it has been used" \ ) \ "\n -t FSTYPE[,...] Unmount only these filesystem type(s)" \ #define umount_example_usage \ "$ umount /dev/hdc1\n" \ #define unshare_trivial_usage \ "[OPTIONS] [PROG ARGS]" \ #define unshare_full_usage "\n" \ "\n -m,--mount[=FILE] Unshare mount namespace" \ "\n -u,--uts[=FILE] Unshare UTS namespace (hostname etc.)" \ "\n -i,--ipc[=FILE] Unshare System V IPC namespace" \ "\n -n,--net[=FILE] Unshare network namespace" \ "\n -p,--pid[=FILE] Unshare PID namespace" \ "\n -U,--user[=FILE] Unshare user namespace" \ "\n -f Fork before execing PROG" \ "\n -r Map current user to root (implies -U)" \ "\n --mount-proc[=DIR] Mount /proc filesystem first (implies -m)" \ "\n --propagation slave|shared|private|unchanged" \ "\n Modify mount propagation in mount namespace" \ "\n --setgroups allow|deny Control the setgroups syscall in user namespaces" \ #define wall_trivial_usage \ "[FILE]" \ #define wall_full_usage "\n\n" \ "Write content of FILE or stdin to all logged-in users" \ #define wall_sample_usage \ "echo foo | wall\n" \ "wall ./mymessage" \ #if defined CONFIG_UDHCP_DEBUG && CONFIG_UDHCP_DEBUG >= 1 \ # define IF_UDHCP_VERBOSE(...) __VA_ARGS__ \ #else \ # define IF_UDHCP_VERBOSE(...) \ #endif \ #define udhcpc6_trivial_usage \ "[-fbq"IF_UDHCP_VERBOSE("v")"R] [-t N] [-T SEC] [-A SEC|-n] [-i IFACE] [-s PROG]\n" \ " [-p PIDFILE]"IF_FEATURE_UDHCP_PORT(" [-P PORT]")" [-ldo] [-r IPv6] [-x OPT:VAL]... [-O OPT]..." \ #define udhcpc6_full_usage "\n" \ "\n -i IFACE Interface to use (default "CONFIG_UDHCPC_DEFAULT_INTERFACE")" \ "\n -p FILE Create pidfile" \ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC6_DEFAULT_SCRIPT")" \ "\n -B Request broadcast replies" \ "\n -t N Send up to N discover packets" \ "\n -T SEC Pause between packets (default 3)" \ "\n -A SEC Wait if lease is not obtained (default 20)" \ USE_FOR_MMU( \ "\n -b Background if lease is not obtained" \ ) \ "\n -n Exit if lease is not obtained" \ "\n -q Exit after obtaining lease" \ "\n -R Release IP on exit" \ "\n -f Run in foreground" \ "\n -S Log to syslog too" \ IF_FEATURE_UDHCP_PORT( \ "\n -P PORT Use PORT (default 546)" \ ) \ "\n -l Send 'information request' instead of 'solicit'" \ "\n (used for servers which do not assign IPv6 addresses)" \ "\n -r IPv6 Request this address ('no' to not request any IP)" \ "\n -d Request prefix" \ "\n -o Don't request any options (unless -O is given)" \ "\n -O OPT Request option OPT from server (cumulative)" \ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \ "\n Examples of string, numeric, and hex byte opts:" \ "\n -x hostname:bbox - option 12" \ "\n -x lease:3600 - option 51 (lease time)" \ "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \ "\n -x 14:'\"dumpfile\"' - option 14 (shell-quoted)" \ IF_UDHCP_VERBOSE( \ "\n -v Verbose" \ ) \ "\nSignals:" \ "\n USR1 Renew lease" \ "\n USR2 Release lease" \ #if defined CONFIG_UDHCP_DEBUG && CONFIG_UDHCP_DEBUG >= 1 \ # define IF_UDHCP_VERBOSE(...) __VA_ARGS__ \ #else \ # define IF_UDHCP_VERBOSE(...) \ #endif \ #define udhcpc_trivial_usage \ "[-fbq"IF_UDHCP_VERBOSE("v")"RB]"IF_FEATURE_UDHCPC_ARPING(" [-a[MSEC]]")" [-t N] [-T SEC] [-A SEC|-n]\n" \ " [-i IFACE]"IF_FEATURE_UDHCP_PORT(" [-P PORT]")" [-s PROG] [-p PIDFILE]\n" \ " [-oC] [-r IP] [-V VENDOR] [-F NAME] [-x OPT:VAL]... [-O OPT]..." \ #define udhcpc_full_usage "\n" \ "\n -i IFACE Interface to use (default "CONFIG_UDHCPC_DEFAULT_INTERFACE")" \ IF_FEATURE_UDHCP_PORT( \ "\n -P PORT Use PORT (default 68)" \ ) \ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \ "\n -p FILE Create pidfile" \ "\n -B Request broadcast replies" \ "\n -t N Send up to N discover packets (default 3)" \ "\n -T SEC Pause between packets (default 3)" \ "\n -A SEC Wait if lease is not obtained (default 20)" \ USE_FOR_MMU( \ "\n -b Background if lease is not obtained" \ ) \ "\n -n Exit if lease is not obtained" \ "\n -q Exit after obtaining lease" \ "\n -R Release IP on exit" \ "\n -f Run in foreground" \ "\n -S Log to syslog too" \ IF_FEATURE_UDHCPC_ARPING( \ "\n -a[MSEC] Validate offered address with ARP ping" \ ) \ "\n -r IP Request this IP address" \ "\n -o Don't request any options (unless -O is given)" \ "\n -O OPT Request option OPT from server (cumulative)" \ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \ "\n Examples of string, numeric, and hex byte opts:" \ "\n -x hostname:bbox - option 12" \ "\n -x lease:3600 - option 51 (lease time)" \ "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \ "\n -x 14:'\"dumpfile\"' - option 14 (shell-quoted)" \ "\n -F NAME Ask server to update DNS mapping for NAME" \ "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \ "\n -C Don't send MAC as client identifier" \ IF_UDHCP_VERBOSE( \ "\n -v Verbose" \ ) \ "\nSignals:" \ "\n USR1 Renew lease" \ "\n USR2 Release lease" \ #define udhcpd_trivial_usage \ "[-fS] [-I ADDR] [-a MSEC]" IF_FEATURE_UDHCP_PORT(" [-P PORT]") " [CONFFILE]" \ #define udhcpd_full_usage "\n\n" \ "DHCP server\n" \ "\n -f Run in foreground" \ "\n -S Log to syslog too" \ "\n -I ADDR Local address" \ "\n -a MSEC Timeout for ARP ping (default 2000)" \ IF_FEATURE_UDHCP_PORT( \ "\n -P PORT Use PORT (default 67)" \ ) \ "\nSignals:" \ "\n USR1 Update lease file" \ #define dhcprelay_trivial_usage \ "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]" \ #define dhcprelay_full_usage "\n\n" \ "Relay DHCP requests between clients and server.\n" \ "Without SERVER_IP, requests are broadcast on SERVER_IFACE." \ #define dumpleases_trivial_usage \ "[-r|-a] [-d] [-f LEASEFILE]" \ #define dumpleases_full_usage "\n\n" \ "Display DHCP leases granted by udhcpd\n" \ "\n -f FILE Lease file" \ "\n -r Show remaining time" \ "\n -a Show expiration time" \ "\n -d Show time in seconds" \ #define busybox_notes_usage \ "Hello world!\n" #endif